|
Jaw/Jaw Open Body Turnbuckle - 1/2-20 Thread
For those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.
Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle.
Specifications:
Machine swage
Bronze body/ 316 stainless ends
Wire size: 5/16"
Breaking strength: 10,500 pounds
Safe working load: 4,200 pounds
Thread size: 1/2-20
Pin to pin length: 11-1/2" (closed) 15-1/2" (open)
Body length: 6-1/2"
Pin diameter: 1/2"
Weight: 1 pound
|
168.76 |
|
|
T-Style Jaw/Jaw Open Body Turnbuckle - 1/4-28 Thread Size
For those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.
Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle.
Specifications:
Jaw with "T" Toggle Construction
Machine swage
Bronze body/ 316 stainless ends
Wire size: 5/32"
Breaking strength: 2,500 pounds
Safe working load: 1,000 pounds
Thread size: 1/4-28
Pin to pin length: 8" (closed) 11" (open)
Body length: 4-3/4"
Pin diameter: 1/4"
Weight: 5 ounces
|
44.59 |
|
|
Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 1/4" - 2-Pack
Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin attached to the hook and loop through the hole and wrap the hook and loop strip around the turnbuckle body. Works on open body turnbuckles and Johnson's positive locking, slotted tubular turnbuckles. This size works for 1/16" diameter for 1/4" threads.
|
13.86 |
|
|
Bosworth 400-H-Ale-1/2"F Guzzler 1/2" Hand Pmp,Tappd
Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1/2" Female Threaded Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability
|
108.13 |
|
|
Open Body Turnbuckle with Splice Eye
*Dyneema Line not included with fittings
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
|
69.29 |
|
|
Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 5/16" & 3/8" - 2-Pack
Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin attached to the hook and loop through the hole and wrap the hook and loop strip around the turnbuckle body. Works on open body turnbuckles and Johnson's positive locking, slotted tubular turnbuckles. This size works for 3/32" diameter for 5/16" and 3/8" threads.
|
13.50 |
|
|
Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 7/16" & 1/2" - 2-Pack
Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin attached to the hook and loop through the hole and wrap the hook and loop strip around the turnbuckle body. Works on open body turnbuckles and Johnson's positive locking, slotted tubular turnbuckles. This size works for 1/8" diameter for 7/16", 1/2", and 5/8" threads.
|
16.16 |
|
|
RAM Twist Lock Suction Cup Mount with 1" Ball Adapter that contains a 1/4"-20 Thread for Cameras
The RAM-B-166-237U consists of a 3.25" suction cup locking base, double socket arm and 1" rubber ball that contains a 1/4"-20 camera male thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. The mount contains adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.
Ball Size: 1 Inch Rubber Ball
Color: Black Powder Coat
Material: Powder Coated Marine Grade Aluminum
|
36.97 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & 1" Ball Adapter that Contains a 1/4"-20 Thread for Cameras
Part #: RAM-B-149Z-237U
The RAM-B-149Z-237U consists of a zinc coated u-bolt base, double socket arm and 1" diameter rubber ball, connected to a 1/4"-20 camera thread. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows for infinite articulation and optimum viewing angles. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. Also included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
Compatible Cameras:
Contour GPS
Contour HD
GoPro HD Helmet HERO
GoPro HD Motorsports HERO
GoPro HD Surf HERO
GoPro Helmet HERO Wide
GoPro Motorsports HERO
GoPro Motorsports HERO Wide
GoPro RC HERO
GoPro Surf Hero
GoPro Wide HERO
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.49 |
|
|
Track Ball™ Mount with 1/4"-20 Threaded Adapter for Action Cameras
The RAP-B-366-153-354-TRA1 consists of a Track Ball™ base, composite double socket arm, and a 1" ball connected to a round plate with 1/4"-20 camera thread. This steel camera thread will connect to any standard female thread found on camcorders, digital cameras and POV cameras. This kit is compatible with virtually any track system including the RAM Tough-Track™.
Features:
1. Unique rubber ball design dampens shock and vibration helping to extend the life of your camera
2. 1/4"-20 male threaded stud will connect to most female threads found on POV cameras
3. High strength materials ensure product longevity
4. Compatible with the RAM Tough-Track™
5. Double ball and socket mount offers infinite adjustment angles
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in a poly bag.
|
26.12 |
|
|
RAM® Ball Adapter with 1/4" - 20" Threaded Hole and Hex Post - C Size
The RAM-337U includes a 1/4"-20 female thread hex hole connected to a 1.5" rubber ball.
Specifications:
Thread Pitch (inch): 1/4"-20 x 1/2" (female)
Ball Size (inch): C Size (1.5")
Materials: Marine-grade aluminum
Packaging Type: Polybag
Weight: 0.14 lb.
Weight Capacity:
Standard Use: 4 lbs
Heavy-Duty Use: 3 lbs
|
13.16 |
|
|
Bosworth 1.5 Inch Threaded Inlet Bronze
|
89.02 |
|
|
Bosworth 1.5 Inch Threaded Oulet Bronze
|
101.73 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & Round Base Adapter that Contains a 1/4"-20 Thread for Cameras
Part #: RAM-B-149Z-C1U
The RAM zinc coated u-bolt rail base consists of the 1" diameter ball and socket system with RAM Universal 1/4"-20 thread centered on a 2.5" diameter plate. This mount is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0" diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5" to 1.25". To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. The male 1/4" long, 1/4"-20 thread in the middle of the 2.5" diameter plate will connect to the standard female thread found at the bottom of most still and video cameras.
|
37.97 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base, Short Double Socket Arm & Round Base Adapter that Contains a 1/4"-20 Thread for Cameras
Part #: RAM-B-149ZA-C1U
The RAM zinc coated u-bolt rail base consists of the 1" diameter ball and socket system with RAM Universal 1/4"-20 thread centered on a 2.5" diameter plate. This mount is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0" diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5" to 1.25". To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. The male 1/4" long, 1/4"-20 thread in the middle of the 2.5" diameter plate will connect to the standard female thread found at the bottom of most still and video cameras.
|
36.77 |
|