|
Standard Battery Switch
For any vehicle that needs to use two batteries where one battery is used for starting the engine, while the other is used to power auxiliary loads. This is a common situation in trucks, boats, RVs, police and rescue vehicles, and in ambulances or fire equipment. A selector switch allows use of the first battery, the second battery, or both batteries simultaneously. This provides back-up starting power in an emergency.
Features:
These switches combine the functions of Battery Selector and Master Disconnect Switches to give four battery power options:
Power cut off at the source
Power On, Battery 2
Power On, Battery 1
Power On, both Batteries
Battery selector switches provide a positive battery disconnect, which has many advantages:
It gives a reliable shutdown of power during maintenance
The version with the key protects against theft of the vehicle, when unattended
It helps protect against electrical fires, when the vehicle is not in use, and minimizes battery drain
Specifications:
Rating: 500A intermittent, 310A continuous, 6-36V DC Electrical ratings on UL labels are conservative. Electrical Ratings Labeled UL 707B
Use with either alternators or generators
Make before break design permits operation through the three On positions with the engines running. Engines should always be shut down before turning to Off
Heavy-Duty Construction Vaporproof, weather-, dust- and corrosion-resistant
Durable, fracture-resistant high temperature plastic case, knob and insulator
Switches conform to USCG section 183.410 for ignition protection
Heavy duty copper stud terminals, with brass hexnuts
Can be surface mounted, or installed through a 3 5/16" diameter hole in the panel
Dimensions: Flange: 6" (152.4mm) diameter, overall height 2 5/8" (66.7mm)
Terminals: 3 copper studs, 3/8" (9.5mm) diameter
|
68.62 |
|
|
Compact Battery Switch - 150A
Upgraded design with bigger contacts (M10) and improved components for heavier 150A current loads even if keeping the compact dimensions, which make it one of the more popular products for 12V applications. Features a removable handle with a plastic body. Rubber cap is included for protection while switch is removed from the socket.
Specifications:
Actuation Type: Lever Key
Terminal Gender: Male
Throw Type: Single
Amperage (A): 150 Amp
Number of Terminals: 2
Terminal Type: Stud
Voltage (V): 12 to 24 Volts
|
19.74 |
|
|
Standard Toggle Switch SPST On-Off 2 Screw
Standard or lighted handle – black nylon or clear plastic, 11/16" (17.5mm) long. Silver contacts. Mounting stem 15/32"-32 thread, 15/32" (11.9mm) long, fits panels up to 1/8" (31.8mm) thick. Includes mounting hardware: black metal facenut and nickel-plated hexnut. 25A at 12V DC. Terminals: .250" blade or 6-32 screw.
|
8.11 |
|
|
Standard Toggle Switch SPDT On-Off-On 3 Screw
Standard or lighted handle – black nylon or clear plastic, 11/16" (17.5mm) long. Silver contacts. Mounting stem 15/32"-32 thread, 15/32" (11.9mm) long, fits panels up to 1/8" (31.8mm) thick. Includes mounting hardware: black metal facenut and nickel-plated hexnut. 25A at 12V DC. Terminals: .250" blade or 6-32 screw.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.34 |
|
|
Standard Toggle Switch SPDT (On)-Off-(On) 3 Screw
Standard or lighted handle – black nylon or clear plastic, 11/16" (17.5mm) long. Silver contacts. Mounting stem 15/32"-32 thread, 15/32" (11.9mm) long, fits panels up to 1/8" (31.8mm) thick. Includes mounting hardware: black metal facenut and nickel-plated hexnut. 25A at 12V DC. Terminals: .250" blade or 6-32 screw.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.59 |
|
|
Sealed Rocker Switch w/Small Round Pilot Lights SPST On-Off 3 Screw
These general purpose switches are suitable for many kinds of applications.
Features:
25A at 12V DC. LED or incandescent
Weather-resistant with contact areas sealed to IP66 (high pressure wash resistant)
Switches snap into standard rocker switch holes 1.45" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)
They have silver contacts, which give superior switching performance
Housing is matte black
|
15.29 |
|
|
Sealed Rocker Switch w/Small Round Pilot Lights SPST On-Off 3 Blade
These general purpose switches are suitable for many kinds of applications.
Features:
25A at 12V DC. LED or incandescent
Weather-resistant with contact areas sealed to IP66 (high pressure wash resistant)
Switches snap into standard rocker switch holes 1.45" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)
They have silver contacts, which give superior switching performance
Housing is matte black
Single Pole, Single Throw, with dependent illumination
Three blade terminals
Red lens
|
20.12 |
|
|
Sealed Rocker Switch w/Small Round Pilot Lights SPDT On-Off-On 4 Blade
These general purpose switches are suitable for many kinds of applications.
Features:
25A at 12V DC. LED or incandescent
Weather-resistant with contact areas sealed to IP66 (high pressure wash resistant)
Switches snap into standard rocker switch holes 1.45" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)
They have silver contacts, which give superior switching performance
Housing is matte black
Single Pole, Double Throw, with dependent illumination
Four blade terminals
Two red lenses
|
26.33 |
|
|
COLE HERSEE
Littelfuse acquired Cole Hersee to offer customers a more extensive portfolio of products in the commercial vehicle market. Cole Hersee is a pioneer and leader in the development of heavy-duty electrical products for the vehicle industry, and have earned a reputation for quality and value.
|
|
|
Heavy Duty Toggle Switch DPST On-Off 4-Screw
Cole Hersee's Heavy Duty DPST Toggle Switch, 4 Screw Terminals, 25 A Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.
|
10.81 |
|
|
Single Pole Brass Marine Battery Switch - 175 Amp - Continuous 800 Amp Intermittent
Marine-Grade UL-Listed master disconnect switches.
Features:
Voltage: 6-36 Vdc
Electrical Ratings*: 250A at 6Vdc, 125A at 12Vdc intermittent, 40A at 6V, 20A at 12V continuous*
Number of Positions: 2
Positions: Off-On
Circuitry: Single-Pole
Case: Brass
Contacts: Silver or Brass
Actuator: Lever
|
61.21 |
|
|
Single Pole Brass Marine Battery Switch - 175 Amp - Continuous 1000 Amp Intermittent
Marine-Grade UL-Listed master disconnect switches.
Features:
Voltage: 6-36 Vdc
Electrical Ratings*: 250A at 6Vdc, 125A at 12Vdc intermittent, 40A at 6V, 20A at 12V continuous*
Number of Positions: 2
Positions: Off-On
Circuitry: Single-Pole
Case: Brass
Contacts: Silver or Brass
Actuator: Lever
|
51.94 |
|
|
Single Pole Brass Battery Switch with Faceplate 175 Amp Continuous 800 Amp Intermittent
Marine-Grade UL-Listed master disconnect switches.
Features:
6-36 VDC
175 Amp Continuous 800 Amp Intermittent
2 Positions
Off-On Positions
Single-Pole Circuitry
Brass Case
Lever Actuator
|
55.81 |
|
|
SR- Series Flange Mount - 300A Battery Switch
Stainless steel hardware and tin-plated copper studs. Can be installed in locations with limited space behind the panel.
Features:
Isolates the batteries and eliminates battery drain when the vehicle is stored overnight or for longer periods. Electrically cuts off battery power for safety or when the vehicle is being serviced.
Ignition protected to SAE J1171 and ISO 8846 for installation in a battery box or on vehicles carrying hazardous loads.
Available with integral holes to accept lockout/tagout. No need to purchase additional hardware.
Plastic construction will not corrode and stands up to road splash and salt spray. Ingress protected to IP67/ IP69K. The switch can be mounted anywhere on the vehicle.
Units have a depth of only 3” (knob front to the end of studs) – can be installed in locations where behind-panel space is limited.
Stainless steel hardware and tin-plated copper contacts minimize resistance in harsh environments.
Specifications:
Current Rating (Continuous) in Amps: 300
Voltage Rating (Max): 32
Circuitry: SPST
Ingress Protection: IP67, IP69K
Actuator: Plastic Knob
Contact Material: Copper
Housing: Engineering Thermoplastic
Agency Approval - Humidity: 0 - 95% RH
Agency Approval - Shock: 50 G
Agency Approval - Vibration: 10 G
|
33.10 |
|
|
Push Button Switch SPST Off-On 2 Screw with Screw-On Cap
Normally Off switches (Normally Open) are push to operate, spring return to Off, and have cylindrical diecast body with 5/8”-32 mounting stem.
Specifications:
Housing: Cylindrical diecast body
Circuitry: Off-On, Normally Off. On with buttom depressed, spring return to Off
Rating: 35A at 12VDC, 20A at 24VDC
Contacts: Silver
Button & Facenut: Chrome-plated except where noted
|
10.58 |
|