|
1501 Tool and Cell Phone Holder
This deluxe maintenance tool holder has a built-in cell phone holder, an electrical tape strap, 4 pockets, a flashlight loop, and can attach to your belt or has a rear flap that will slide conveniently into a pocket for carrying.
Features:
Attach to belt with snap closure or carry securely in pocket with wide padded flap
Webbing slot for small flashlights or other tools
Electrical tape sling
Made of polyester fabric
4 pockets and 1 padded pocket to fit most compact cell phones
*Sold as an Indiviudual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.72 |
|
|
RAM Universal X-Grip Cell Phone Holder w/1" Ball
Part #: RAM-HOL-UN7BU
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
27.29 |
|
|
RAM Twist Lock Suction Cup Mount w/Universal X-Grip Cell Phone Holder
The RAM-B-166-UN7U consists of a 3.25" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved.
Compatible Devices (WITH OR WITHOUT CASE):
Apple iPhone 6
Apple iPhone 5s
Apple iPhone 5c
Apple iPhone 5
Apple iPhone 4
Apple iPhone 4
Apple iPhone 3GS
Apple iPhone 3G
Apple iPhone
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung GALAXY S4
Samsung GALAXY S5
The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Lifetime warranty
7. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
55.51 |
|
|
RAM EZ-Strap Rail Mount w/Universal X-Grip Cell Phone Holder
The RAP-SB-187-UN7U consists of the RAM EZ-Strap base, double ball SHORT arm and universal X-Grip holder. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the universal X-Grip holder to your optimum viewing position. This mount rotates 180 degrees.
Compatible Devices (WITH OR WITHOUT CASE):
Apple iPhone 6
Apple iPhone 5s
Apple iPhone 5c
Apple iPhone 5
Apple iPhone 4S
Apple iPhone 4
Apple iPhone 3GS
Apple iPhone 3G
Apple iPhone
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung GALAXY S4
Samsung GALAXY S5
The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable
5. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
6. Single socket technology allows for multiple adjustment angles and articulation of device
7. Lifetime warranty
Material:
High Strength Composite & Stainless Steel
Note:
The "U" in the part number reflects product packaged in poly bag.
|
33.32 |
|
|
SnapIt! Marine T009C Large Cell Phone Holder
Holds large cell phones. Will fit phones up to 3.7" wide X .77" thick. Order to fit your specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft.
|
19.00 |
|
|
PB1133 Tool Backpack
Tool carrying just got easier with CLC’s Molded Base Tool Backpack. Durably designed for longer wear, this heavy-duty bag is constructed with 1680D Ballistic Poly and a molded base for longevity. It features ample room for tools, two large zipper compartments, a padded section to store electronics/valuables, 38 reinforced pockets, a cell phone holder, a tape measure clip, and 3 foam back pads for carrying comfort.
This rugged quality, multi-functional CLC backpack is a universal tool storage solution across the trades.
Features:
Durable design, constructed with 1680D ballistic polyester.
The molded base provides a flat surface to stand the backpack upright and keep your tools dry and safe while soft enough to be comfortable on your back.
The main back zippered compartment has padded pockets for laptops, tablets, charging accessories, or other electronic tools.
The main front zippered compartment folds all the way down for easy access and has multiple pockets to organize tools and accessories
3 Large foam back pads for extra comfort.
Adjustable padded shoulder straps with slip-resistant material, cell phone holder, and 2-way adjustable sternum strap.
An ergonomic silicone rubber carrying handle with webbing supports heavy loads.
Heavy zippers and large, ergonomic metal zipper pullers.
38 Pockets – 9 outside and 29 inside
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
111.91 |
|
|
1105 Cell Phone and Tool Holder
This 5-pocket tool and cell phone holder includes a small flashlight sleeve, a hook for your key ring, a hook-and-loop flap closure, and versatile 3-way attachment to your belt, suspenders, pants, etc.
Features:
Made of durable polyester fabric
Holds most brands of compact cell phones
Securely holds small tools and accessories like pliers, mini-flashlights, screwdrivers, multi-tools, etc
Versatile 3-way attachment for pants, web suspenders, work aprons, etc
Large back pocket dimensions (H x W x D) - 6" x 2" x 1"
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.63 |
|
|
RAM EZ-ON/OFF Bicycle Mount w/Universal X-Grip Phone Holder
No matter where your adventure takes you, it is highly likely that your smartphone is within hands reach. For the outdoor biking enthusiast, the RAM Universal Bike Mount is the most complete mounting solution for attaching a smartphone to your bike. Compatible with most any smartphone, the X-Grip cradle has a clean and clever four leg design that sports great holding power, but also allows for easy insertion or release of your phone. Designed to fit most common handlebar sizes, the included base uses common zip ties to attach to a variety of handlebar diameters. Made of high strength composite, it is light weight too. Adjustable to allow for the best viewing angle, this product is perfect for any cyclist or open trail adventurer.
Compatible Devices (WITH OR WITHOUT CASE):
Apple iPhone 6
Apple iPhone 5s
Apple iPhone 5c
Apple iPhone 5
Apple iPhone 4S
Apple iPhone 4
Apple iPhone 3GS
Apple iPhone 3G
Apple iPhone
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung GALAXY S4
Samsung GALAXY S5
The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Rail Dimensions:
The zip ties will attach to rails, from a minimum of 0.5" in diameter. Included is a 12 degree tapered shaft for tapered handlebars. Overall length of the each zip tie is 7".
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable
5. Lifetime warranty
6. Made in U.S.A.
Material:
Marine Grade Stainless Steel Components & High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
29.60 |
|
|
1104 MULTI-PURPOSE TOOL HOLDER
This 4-pocket tool and small cell phone holder includes a small flashlight sleeve, a hook for your key ring, a hook-and-loop flap closure, and versatile 3-way attachment to your belt, suspenders, pants, etc.
Features
Made of polyester fabric
Versatile 3-way attachment for pants, web suspenders, work aprons, etc
Securely holds small tools or accessories like pliers, mini-flashlights, screwdrivers, etc
Large front pocket dimensions (H x W x D) - 4" x 3" x 1"
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.68 |
|
|
RAM Mount Universal X-Grip Holder Diamond Base Surface Mount
Part #: RAM-B-102-UN7U
The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.52 |
|
|
RAM Mount Universal X-Grip™ Holder Handlebar Rail Mount
Part #: RAM-B-149Z-UN7U
The RAM-B-149Z-UN7U consists of a double socket arm, handlebar rail mount with zinc coated u-bolt base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung Galaxy S7
Samsung Galaxy S7 Edge
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
58.96 |
|
|
RAM Universal X-Grip® Cell Phone Holder
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Features:
Spring loaded holder expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
Single socket technology allows for multiple adjustment angles and articulation of device
Compatible Cases/Skins/Bumpers:
Artwizz
Ballistic
Belkin
BodyGlove
Case-Mate
DragonFly
Ed Hardy
FishBone
G-Mate
Griffin
iFrogz
iLuv
InCase
Incipio
Inspiretech
iSkin
Ivyskin
Krusell
Luxmo
Mobo
Monaco
Oakley
Otterbox
Seidio
SolidColors
Speck
SwitchEasy
Talon Cases
TPhone
Trident
TurtleBack
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Material:
High Strength Composite with Rubber Tips
|
23.39 |
|
|
RAM Universal X-Grip Holder Brake/Clutch Reservoir Mount
Part #: RAM-B-174-UN7
The RAM-B-174-UN7 consists of a double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter and universal X-Grip™ cell phone holder. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the cell phone holder to your optimum viewing position. The spring loaded X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic.
X-Grip™ Holder Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
X-Grip™ Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
Note: Part number reflects product packaged in clear clam shell for store shelf display. To see if the RAM-B-174-UN7 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
|
63.18 |
|
|
Strap Clamp, Roll Bar Mount w/Universal X-Grip® Cell/iPhone Cradle
The RAM-B-231-2-UN7U consists of a steel strap base, stainless steel u-bolt base, double socket arm and universal spring loaded X-Grip® cradle for cell phones. Designed for a clean installation, the RAM strap mount will accommodate most common roll bar sizes on UTV’s, allowing for the placement of the RAM rubber ball base. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Rail Accommodation Dimensions:
Mount with Strap: 1.57" to a maximum of 3.15"
Mount with U-Bolt: 0.50" to a maximum of 1.25"
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material:
Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in a retail box for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
|
58.91 |
|
|
9mm Angled Base Motorcycle Mount w/Short Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle
The RAM-B-272-A-UN7 consists of an angled base with 9mm hole, SHORT double socket arm and universal spring loaded X-Grip® cradle for cell phones. The angled base is often used on motorcycles, attaching to the mirror frame, the main brand of bike for this part is BMW. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
|
52.50 |
|