CargoBuckle Floor Mounting Bracket - Pair The floor mounting bracket attaches to a solid structure to provide a fixed position tie-down, with a 45-degree mounting angle that accommodates almost all tie-down applications.

Side Angle "L" Bracket - Pair - Galvanized 7 ga, 1/2” shaft hole, 3/8” mounting hole. Sold in pairs.

Roller Bunk Mounting Bracket - 11" Perfect for use under roller bunks when the bunks need to be raised up off the frame.  Adjustable 11 ga top swivel bracket allows bunks to tilt to the shape of the hull.  Features: 11” tall 1/2” swivel bolt included 7/16” hole for mounting to roller bunks

BoatBuckle CargoBuckle Flush Mount Tie-Down System The CargoBuckle Flush Mount System enables the CargoBuckle to be instantly ready when you need it, but neatly tucked out of the way when you don't. To use, simply open the "trap-door" and the CargoBuckle hinges up to the ready position. When not in use, the CargoBuckle hinges below the floor and the "trap-door" closes. Product Info: Item No.: F18804 Dimensions: 4.5" deep UOM: Each Break Strength: 3,500 lbs./ea. Safe Working Load: 1,167 lbs. Package: Clam

Mounting Bracket for Series 970 Portable Toilets  Stainless Steel hold-down brackets/fasteners for Series 970 portable toilets.  Secures toilet to the floor. Mounting screws not included. *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

XS Series Wake Tower Mounting Bracket - 2" Pipe Mount Versatile mounting solution for XS Series wake tower speakers. Features: Quick and simple to install UV stable salt fog-resistant aluminum alloy design  In the Box: Two (2) pipe mount wake tower brackets Mounting hardware Documentation *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XS Series Wake Tower Mounting Bracket - 2.5" Pipe Mount Versatile mounting solution for XS Series wake tower speakers. Features: Quick and simple to install UV stable salt fog-resistant aluminum alloy design  In the Box: Two (2) pipe mount wake tower brackets Mounting hardware Documentation *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Universal Floor Mount The Universal Floor Mount is the ideal solution for mounting your Universal Laptop Mount when the under-seat bolts are not accessible. Featuring the same easy-on/easy-off design, the black powder-coated Universal Floor Mount can be mounted anywhere using the six (6) included sheet-metal screws. Features: Strong Sturdy Base Allows Mounting On Vehicle Floor Sheet Metal Screws Included One Year Warranty

Signature Series Wake Tower Mounting Bracket -  2" Fixed Versatile mounting solution for Signature Series wake tower speakers.  Features: Quick and simple to install UV stable salt fog-resistant aluminum alloy design Technical Specifications: Fixed (non-swivel) Fits wake tower bars with an outer diameter of 2” (60.33 mm)  Dimensions (W x H x D) - 2" x 4.5" x 6-7/8" (50 x 112 x 174 mm)  In the Box: Two (2) Swivel mount wake tower brackets Mounting hardware  Documentation *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Signature Series 3 Wake Tower Mounting Bracket - Deck Mount Versatile mounting solution for Signature Series wake tower speakers. Features: Quick and simple to install UV stable salt fog-resistant aluminum alloy design  Technical Specifications: Fixed (non-swivel) Dimensions (W x H x D) - 4.84" x 3.31" x 2.36" (123 x 84 x 60 mm) In the Box: Two (2) Deck mount wake tower brackets Mounting hardware  Documentation *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Wall Mounting Bracket for AirForce® Master Blaster Dryer The perfect way to get the AirForce® Master Blaster Dryer (MB-3CD) off the floor and out of the way. Catalog P/N MVC-331 *Sold as an Individual

XS Series Wake Tower Mounting Bracket - Flat Mount Versatile mounting solution for XS Series wake tower speakers. Features: Quick and simple to install UV stable salt fog-resistant aluminum alloy design  In the Box: Two (2) flat-mount wake tower brackets Mounting hardware  Documentation *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PP4800-07 PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, Requires Raymarine Right Angle Connector) PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Tilt & Swivel Lockable LED TV Wall Mount Bracket The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket is a unique bracket with a simple but very versatile design. The team at Majestic worked very closely with various Marine and RV manufacturers and customers to engineer a bracket that can be a simple wall bracket and yet give you the flexibility of some angular movement. The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket does just that is easy to install, and has a lot of flexibility. The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket comes in Black and will fit all Majestic LED TV models 22" or less. It is designed for easy mounting and removal. Simply remove the securing locking screw and slide up to remove or slide down to install. This bracket is designed for both 75mm and 100mm Vesa mounting solutions. The Tilt and Swivel allow for the TV to be installed almost anywhere and with the wide viewing angles, you will always see the perfect picture. Features Distance to wall: 44mm Loading weight: 15kgs Max TV size range: 15-22" Adjustable angle: 15 degrees up/down & left/right

Flojet 20899-101 L Bracket Pair