Wind Vane Kit Spare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units with 5 wires. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Spare wind anemometer cup kit. Spare anemometer cup assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units.  For 5 wired units. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wind Vane Assembly for WS300 & WS700 Wind vane assembly spare for WS300 and WS700 series wind sensors.

Wind Vane Kit Wireless Tactical for Version 2 - 3 Wire Units Spare wind vane assembly with fixings and illustrated fitting instructions For Clipper, Target, Cruiser and Wireless, Tactical masthead units. Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit.  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wind Repeater Display Add or replace the display on the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.  The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence. Technical Specifications: Works with NMEA 0183 NMEA protocol  7 levels of display backlighting Dimensions  (H x W x D) - 4.33" x 4.33" x 1.18" (110 x 110 x 30mm) In the Box: 16.5' (5 M) Cable Mounting 'O' ring  Weather cover *Sold as Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TA100 Wind Vane, bearing & stud kit

Wind Vane & Cups Compatible Devices: Raymarine ST60 ST60+ i60 ST290 Egg-Shape Masthead Transducers

Wind Anemometer Cup Kit for Version 2 - 3 Wire Units Spare anemometer cup assembly with fixings and illustrated fitting instructions.  Clipper, Target, Cruiser Wind Version 2 – Three wire mast units, Wireless and Tactical masthead units. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

WindTrak 10 Sport Wind Vane With the introduction of the WindTrak 10 Sport, WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia van, and easy-to-read, fully adjustable tacking tab system. Reflector tape on the vane and tacking tabs make WindTrak 10 Sport easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 10 Sport has a 10" (25 cm) vane. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5 cm) tall and weighs 1.2 ounces (31 g).

WindTrak 15 WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. WindTrak is the perfect choice for all cruising and racing boats 15' (4.6 meters) and bigger. Reflector tape on the vane and tacking tabs make WindTrak 15 easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 15 has a 15" (38 cm) vane. Includes through-bolt or drill and tap mounting socket; 5/16" -18 stainless stud, washers and nut. Stands 12.75" (32 cm) tall and weighs just 3.6 ounces (101 g). A bird-proof spike extends another 10" (24 cm) above the vane to discourage birds from landing.

WindTrak AV Antenna Mount Wind Vane WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. WindTrak AV installs onto most whip antennas, including Metz and Shakespeare brands, with a whip diameter less than 1/8" (3 mm). Combine two installations into one to reduce masthead clutter, weight, and windage aloft. Rides on low-friction Teflon® bearings. Complete with 15" (38 cm) vane, reflective tacking arms, hardware and instructions for easy installation. Antenna not included.

Blacksmith Horizontal Carbon Fiber Wind Vane Bring your sailing experience to a new level Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Horizontal is a dinghy race pro gooseneck wind vane for Laser, Finn, Banshee, Sunfish, Optimist, El Toro and Sabot. Feature precise balance – effective and efficient in 0.8 knot up to 40 knots wind conditions. Features: Handmade dinghy carbon gooseneck wind vane 12×7.8 in / 30×20 cm 0.8 oz / 25 g 3D carbon & duraluminum Adjustable mast clam

Wind Vane Determine wind direction with your GWS™ 10 with this wind vane. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blacksmith Crazy Kids Fiberglass Wind Vane Bring your sailing experience to a new level traditional wind indicators tend to be fragile and easily bent or get broken. Not anymore! Davis Instrument's Optimist Pro Wind Vane, made from black fiber glass and duraluminum to withstand the rigors of hard racing. Crazy Kids Wind Vane is a small boat wind vane for mast head mounting. Handcrafted, calibrated and tested, Crazy Kids is precision-balanced to be incredibly sensitive in breezes from 0.8 to 40 knots. Hi-tech black with yellow highlights, they stand out in both sunny and overcast skies. Comes with an American flag sticker that can be used to identify a US sailor at international competitions. Features: Handmade Optimist wind vane for mast head mounting 7×11 in / 18×28 cm 0.5 oz / 14 g Black fiber glass & duraluminum Carbon-free

Blacksmith Olympic Boat Carbon Fiber Wind Vane Bring your sailing experience to a new level Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Feature precise balance – Olympic Boat Carbon Fiber Wind Vane is effective and efficient in 0.8 knot up to 40 knots wind conditions. Features: Handmade carbon masthead wind vane for boats up to 20 ft 9×9 in / 23×23 cm 0.5 oz / 13.9 g 3D carbon & duraluminum J-base for side, top, or front mounting