Wind Repeater Display Add or replace the display on the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.  The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence. Technical Specifications: Works with NMEA 0183 NMEA protocol  7 levels of display backlighting Dimensions  (H x W x D) - 4.33" x 4.33" x 1.18" (110 x 110 x 30mm) In the Box: 16.5' (5 M) Cable Mounting 'O' ring  Weather cover *Sold as Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wireless Masthead & Data Box The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit. Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery. Easy insta ll ation with mast in place no wires to run down Simple masthead alignment through base unit Light weight - 190 grams Specifications: Sleep time > 15,000 Hours * Operating time > 2,000 Hours * Charging time < 150 Hours of bright daylight * Fully charged with no further daylight NMEA 0183 4800 Baud 0/P Level 0 to 12 volt from 220 ohm source resistance. NMEA data sentence MWV Supply voltage 6 to 16 volts. (Nominal 12 volts) Supply current 17mA Fuse 1 Amp. Display Wind speed and direction data to any compatible NMEA device The Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication. Display Unit Spcifications Supply voltage Nomina l12V DC NMEA 0183 input sentence MWV 9 levels of display backlighting Display case size 110 x 11Omm Depth behind panel 30mm Consumption, 1OmA+ (1OmA for display illumination max) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it boats large clear digits and simple operation. Installation coundn't be simpler with just two wing nuts to fasten the unit into the panel ans two wires to connect to the GPS. Technical Specifications: Standard 110mm case Super large high contrast LCD Four instantly accessable display screens Standard NMEA 0183 interface suits most Complete with weather cover and 10 meters of cableThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting. Technical Specifications: 40mm high digits Depth below transducer/below keel/below surface Deep and shallow alarms (audio and visual) User selectable feet or meters Intellegent gain control & manual override Selectable display rate and depth averaging rate Depth trend indicator No echo indicator High transmit power All settings stored in non volatile memory Tactile keypad Consumption 20mA + 25Ma for backlight (max) ***Note - this is not a stand alone unit and cannot be connected to a depth transducer. It must be connecetd to the Clipper Depth master display unit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper Compass Repeater has all the features of the master unit and an independent off course alarm. Steer to course function When the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the direction of the chevrons until they are extinguished. The steering sensitivity can be preset by the user. An off course alarm provides a safety feature when not at the helm. If the heading deviates by more than a preset amount then the alarm will sound. Technical Specifications: Adjustable Damping 1 degree display resolution Display case size 110 x 110mm Depth behind panel 30mm Complete with 5 meter cable, 'O' ring and weather cover This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a 'windex' style indicator. The Masthead unit is well proven and supplied with 20 metres of cable as standard. Technical Specifications: Supply voltage Nominal 12v DC Consumption, 50mA+ (25mA for display illumination max) Keypad adjustment of masthead alignment 7 levels of display backlighting Display case size 110 x 110 mm Depth behind panel 30mm Anemometer head 210 x 140mm 5 and 20 meter extension cables available Compatible with Standard Horizon CP180 and CP300 plotters This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MeteoMan Barometer The rate of change of barometric pressure and history of wind speed can be an invaluable indicator of imminent conditions. Many sailors rely on low cost domestic barometers, which are inaccurate, have low resolution and very poor history. Several quality paper recording instruments exist but are delicate, fiddly to use and rely on paper which can jam when damp. The MeteoMan overcomes all these problems. It provides an accurate, high resolution barograph recording in excess of five days data on barometric pressure and wind speed. It is easy to use, reliable, rugged and draws very little power from the boat's battery. The MeteoMan is available with an optional NMEA Wind sensor which provides wind direction, wind speed and external temperature. The Meteoman provides reliable meteorological information for the yachtsman. The main display shows the wind speed and direction, the ambient temperature and the barometric pressure. To assist in predicting future trends the unit also displays a precision barograph and an anemograph showing barometric pressure and wind speed for the previous five days. In addition to the meteorological functions the unit includes a marine chronometer, a stop watch, a race countdown timer, display of internal temperature and battery voltage. MeteoMan can be connected to an NMEA Clipper Wind system where it will get wind speed/direction data via the Clipper wind output. NMEA Wind Sensor supplied with mounting brackets and 20 metres of two core screened cable. NMEA 0183 sentences: Wind speed/direction MWV Temperature XDR MeteoMan specifications Atmospheric pressure range 850 to 1100mb (user adjustment to compensate for altitude) Pressure history Range 1 950 to 1050mb Range 2 980 to 1030mb with 0.5mb resolution Recording time 0 to 120 hours 0 to 60 hours 0 to 30 hours Wind speed (when fitted with NMEA wind sensor) Maximum speed 100 knots Wind speed history Range 1 0 to 100 knots Range 2 0 to 50 knots Range 3 0 to 25 knots Recording time 0 to 120 hours 0 to 60 hours 0 to 30 hours Wind direction (when fitted with NMEA wind sensor) 0 to 360 degrees (in relative mode) Port 180 degrees to Starboard 180 degrees (innautical mode) Displayed in analogue and digital format Resolution 1 degree Real time clock 12 or 24 hour format Race countdown timer 10 and 5 minutes Stop watch with split timing Temperature Outside temperature (when fitted with NMEA wind sensor) Cabin temperature Resolution 1 degree centigrade Supply voltage 9.0 to 15.0 volts The voltage is shown on the display with a resolution of 0.1 volts Supply current Operating current 100mA (when fitted with NMEA wind sensor) Operating current 150mA (with backlight illuminated)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i70s Multifunction Instrument Display Maximum Visibility and Maximum Versatility The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1_ display, the i70s is easy-to-customize with digital, analogue and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours. Features: 4.1" super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle Glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover *NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is required for connecting the i70s to NMEA2000 backbone. Intuitive LightHouse User Interface The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s. Networking Raymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks. AIS Repeater Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information. Transducer Connectivity Pair i70s instruments with the innovative iTC-5 instrument transducer converter for seamless integration with analogue depth, wind, speed, compass and rudder transducer. Alternatively, you can network the i70s to DST800 and p79s Airmar smart tranducers. Customization The Raymarine i70s instrument is easily customised to suit your personal boating requirements. From traditional analogue dials to engine information and tank levels, i70s has the capabilities to show it all.

The Clipper Log Repeater has its own independent alarm function as well as repeating all data from the master unit. Technical Specifications: 40mm high digits 7 level display backlighting Complete with 5 meter cable, 'O' ring and weather cover Consumption 10mA + 25mA for display backlightThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i50/i60 Wind/Speed/Depth System Package Includes: i50 Depth - E70148 i50 Speed - E70147 i60 Wind - E70150 i60 SeaTalkng Instruments The all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays. For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i60 Wind Instrument w/Windvane Transducer Full featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics. Short arm vane supplied with 30m (97.5') cable Compatible with Raymarine's masthead transducer (recommend for sailboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems Large, crisp LCD displays with high contrast for excellent visibility Red backlighting for outstanding night-time visibility SeaTalkng and SeaTalk-1 Networking for maximum flexibility Fully compatible with i70, p70 and p70R Color Instruments and Autopilots 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy i50 SeaTalkng Instruments  The all-new i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays. For the ultimate in flexibility the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i50 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i50 Speed Instrument  The i50 Depth Instrument offers easy-to-read displays of boat speed through water, GPS speed over ground (SOG), velocity made good (VMG), average speed, and max speed, distance log, trip log, and water temperature. i50 Speed also includes a count up timer, and 2 race-start timers. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 speed displays Built-in speed transducer connection i50 Depth Instrument  The i50 Depth Instrument offers accurate and reliable displays of depth, max depth and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarms. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 depth displays Built-in depth transducer connection i50 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

i50/i60 Wind, Speed, Depth System Pack with Transducers  Includes: E70058 - i50 Speed Instrument E70673 - ST900/P120 S/T Thru Hull - 13.7m Cable E70059 - i50 Depth Instrument M78713-PZ - P319 LP Thru Hull Depth Transducer E70061 - i60 Analogue Wind Instrument E22078 - Short Arm Wind Transducer i60 SeaTalkng Instruments The  i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i60 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i60 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i60 Wind Instrument with Windvane Transducer Full-featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting, and high-contrast text and graphics. Short arm vane supplied with 30m (97.5') cable Compatible with Raymarine's masthead transducer (recommended for sailboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems Large, crisp LCDs with high contrast for excellent visibility Red backlighting for outstanding night-time visibility SeaTalkng and SeaTalk-1 Networking for maximum flexibility Fully compatible with i70, p70 and p70R Color Instruments and Autopilots 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy i50 SeaTalkng Instruments  The  i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i50 Speed Instrument  The i50 Speed Instrument offers easy-to-read displays of boat speed through water, GPS speed over ground (SOG), velocity made good (VMG), average speed, and max speed, distance log, trip log, and water temperature. i50 Speed also includes a count-up timer and 2 race-start timers. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 speed displays Built-in speed transducer connection i50 Depth Instrument  The i50 Depth Instrument offers accurate and reliable displays of depth, max depth, and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarm. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 depth displays Built-in depth transducer connection i50 Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems. Large, crisp LCDs with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70, and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

i50 SeaTalkng Instruments - Tridata The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays. For the ultimate in flexibility the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i50 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i50 Tridata Instrument The i50 Tridata is a convenient 3-line instrument that combines the functions of the Speed and Depth Instruments into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium, or as a depth and speed repeater solution for other locations on the boat. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Use a primary display or as repeater of i50 depth and speed instruments Built-in depth and speed transducer connections The i50 Tridata's 3-line LCD display can show current depth, current speed, distance log, trip log and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. For racers, Tridats has a count-up timer, and 2 race start timers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm and deep anchor alarm. i50 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

Raymarine i70s Sailing System Pack, Wind, Depth, Speed i70s Multi Display E70327 Maximum Visibility and Maximum Versatility The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1_ display, the i70s is easy-to-customize with digital, analogue and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours. Features: 4.1" super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle Glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover *NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is required for connecting the i70s to NMEA2000 backbone. Intuitive LightHouse User Interface The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s. Networking Raymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks. AIS Repeater Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information. iTC5 Transducer Converter E70010 The iTC5 Instrument Transducer Converter enables the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to host the five most common analog transducers; depth, speed/temperature, wind, compass and rudder. The iTC5 instantly converts these 5 analog signals to digital SeaTalkng protocol. In addition to providing analog-to-digital conversion, the iTC5 provides all of the necessary power and communications connections to the transducers. This greatly simplifies the installation of new systems, and also provides a simple and cost-effective means for owners of older analog instrument displays to upgrade to the latest digital display technology. The iTC5 eliminates the need for expensive "smart" transducers or individual instrument pods. Complete control for calibration and alarms is performed through the i70 or ST70 Plus instruments. The iTC5 connects to Raymarine's SeaTalkng network and works with most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80 and ST290 series instruments. Additionally the iTC5 works with Raymarine fluxgate compass modules as well as rotary and linear rudder feedback transducers to support compass heading and rudder angle instruments. Features: All-in-one analog to digital converter for depth, speed/temperature, wind, compass and rudder transducers Outputs SeaTalkng and NMEA2000 data to digital instruments, MFDs and more Enables easy upgrade of legacy analog instrument displays without replacing transducers SeaTalkng network provides all necessary power and data connections Ideal for use with Raymarine i70 and ST70 Plus digital instrument systems Wind Vane E22078 Standard Forward Wind Transducer, Standard Length: 14 1/2" Includes 100ft. Cable. DST800 Nylon Thru hull A22154 Raymarine DST800 Nylon Thru Hull Transducer with Depth, Speed, and Temp for ST60, ITC-5 PACKAGE CONTAINS: 1ea E70327 i70s Instrument 1ea E70010 ITC-5 1ea A22154 DST800 Transducer 1ea E22078 Standard Wind Transducer 1ea A06031 Backbone Terminator 1ea A06074 Inline Terminator 1ea A06068 Backbone Cable 9M 1ea A06049 Power Cable

i70s System Pack with Color Instrument & Wind, DST Transducers, iTC-5, 3M Backbone, T-Piece, Power & 2 Backbone Terminators  Instrument Data is Now Beautiful Maximum Visibility and Maximum Versatility The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1” display the i70s is easy-to-customize with digital, analog and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours. Features: 4.1” super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle New glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover *NMEA2000 certification pending. A DeviceNet to SeaTalkng adaptor is required for connecting the i70s to NMEA2000 backbone. Intuitive LightHouse User Interface The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s. Networking Raymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks. AIS Repeater Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information. Transducer Connectivity Pair i70s instruments with the innovative iTC-5 instrument transducer converter for seamless integration with analog depth, wind, speed, compass and rudder transducer. Alternatively, you can network the i70s to DST800 and p79s Airmar smart tranducers. Customization The Raymarine i70s instrument is easily customized to suit your personal boating requirements. From traditional analog dials to engine information and tank levels, i70s has the capabilities to show it all. Package Contains: 1ea E70327 i70s Instrument 1ea E70010 ITC-5 1ea A22154 DST800 Transducer 1ea E22078 Standard Wind Transducer 2ea A06031 Backbone Terminator 1ea A06064 5-Way Connector 1ea A06035 Backbone Cable 3M 1ea A06049 Power Cable

i60 SeaTalkng Instruments - Wind w/Wind Vane Transducer The all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays. For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i60 Wind Instrument w/Windvane Transducer Full featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics. Short arm vane supplied with 30m (97.5') cable Compatible with Raymarine's masthead transducer (recommend for sailboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed. Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy