The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a 'windex' style indicator. The Masthead unit is well proven and supplied with 20 metres of cable as standard. Technical Specifications: Supply voltage Nominal 12v DC Consumption, 50mA+ (25mA for display illumination max) Keypad adjustment of masthead alignment 7 levels of display backlighting Display case size 110 x 110 mm Depth behind panel 30mm Anemometer head 210 x 140mm 5 and 20 meter extension cables available Compatible with Standard Horizon CP180 and CP300 plotters This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wireless Masthead & Data Box The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit. Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery. Easy insta ll ation with mast in place no wires to run down Simple masthead alignment through base unit Light weight - 190 grams Specifications: Sleep time > 15,000 Hours * Operating time > 2,000 Hours * Charging time < 150 Hours of bright daylight * Fully charged with no further daylight NMEA 0183 4800 Baud 0/P Level 0 to 12 volt from 220 ohm source resistance. NMEA data sentence MWV Supply voltage 6 to 16 volts. (Nominal 12 volts) Supply current 17mA Fuse 1 Amp. Display Wind speed and direction data to any compatible NMEA device The Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication. Display Unit Spcifications Supply voltage Nomina l12V DC NMEA 0183 input sentence MWV 9 levels of display backlighting Display case size 110 x 11Omm Depth behind panel 30mm Consumption, 1OmA+ (1OmA for display illumination max) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Eagle 7 with TripleShot Transducer & Discover OnBoard Chart Eagle® was born to make fishing as simple and enjoyable as possible. Easy to use and quick to install, this model features a TripleShot™ HD Transducer with FishReveal technology and autotuning for a quick and optimal setup. An IPS screen provides higher resolution and visibility from all angles. This model also comes bundled with high-resolution C-MAP® Discover OnBoard™ charts for the US and Canada. Easy to Use Sonar TripleShot HD Have the best chance of finding fish with underwater views to the side and below the boat, all with one transducer. TripleShot™ HD features the fish-finding capability of wide-angle high CHIRP sonar and high-resolution images of fish-holding structures from SideScan and DownScan Imaging™. FishReveal™ Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.  Autotuning Simple autotuning sonar gives users the optimal settings from the start, so users don’t have to spend time trying to find them. Detailed Charting C-MAP Discover OnBoard US/Canada Bundle Spend more time fishing and less time searching, with high-resolution C-MAP® Discover OnBoard charts included for the US and Canada. With Eagle, users have all the details needed to discover and navigate to the best fishing spots, faster. Genesis Live Know the local waters better than anyone with the ability to create custom ½-foot contour maps of the local lake or uncharted water in real-time. Designed for Fishing IPS Screens See clearly wherever users go with an IPS screen, offering improved resolution, clarity, and visibility, even with polarized sunglasses in direct sunlight. Connector System Set up in an instant with Eagle’s improved twist-locking connector, promising easy installation and removal every time. One-Year Warranty Lowrance's priority is to give users superior quality products and a stress-free time on the water. Enjoy the feeling of fishing with peace of mind, thanks to Lowrance's one-year warranty guarantee. Features: Enhanced TripleShot™ Transducer with HD Autotuning Sonar C-MAP® Discover OnBoard™ charts for the US and Canada IPS screen, viewable from all angles, even in polarized glasses Reliable twist-lock connector system for easy installation in any boat or kayak SD card slot for software updates, Genesis Live recording, and charting add-ons See fish hiding in cover with FishReveal™ mode Increase contrast and viewability with Imaging color palettes What’s in the Box? Eagle 7 Display TripleShot HD Transducer Tripleshot Bracket  C-MAP Discover OnBoard™ charts for the US and Canada Power Cable, with fuse and connectors Eagle 7 Bracket and mounting hardware Spotlight Feature Icons: CHIRP DownScan FishReveal IPS Screens Autotuning Sonar

Eagle 7 with SplitShot Transducer & Discover OnBoard Chart Eagle® was born to make fishing as simple and enjoyable as possible. Easy to use and quick to install, this model features a SplitShot™ HD Transducer with FishReveal technology and autotuning for a quick and optimal setup. An IPS screen provides higher resolution and visibility from all angles. This model also comes bundled with high-resolution C-MAP® Discover OnBoard™ charts for the US and Canada. Easy to Use Sonar SplitShot™ HD Get the best underwater views below the boat with SplitShot HD, featuring the fish-finding capability of wide-angle high-CHIRP sonar and the high-resolution images of fish-holding structures from DownScan Imaging™. FishReveal™ Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.  Autotuning Simple autotuning sonar gives users the optimal settings from the start, so users don’t have to spend time trying to find them. Detailed Charting C-MAP Discover OnBoard US/Canada Bundle Spend more time fishing and less time searching, with high-resolution C-MAP® Discover OnBoard charts included for the US and Canada. With Eagle, users have all the details needed to discover and navigate to the best fishing spots, faster. Genesis Live Know the local waters better than anyone with the ability to create custom ½-foot contour maps of the local lake or uncharted water in real-time. Designed for Fishing IPS Screens See clearly wherever the user goes with an IPS screen, offering improved resolution, clarity, and visibility, even with polarized sunglasses in direct sunlight. Connector System Set up in an instant with Eagle’s improved twist-locking connector, promising easy installation and removal every time. One-Year Warranty Lowrance's priority is to give users superior quality products and a stress-free time on the water. Enjoy the feeling of fishing with peace of mind, thanks to Lowrance's one-year warranty guarantee. Features: Enhanced SplitShot™ HD Transducer with Autotuning Sonar C-MAP® Discover OnBoard™ charts for the US and Canada IPS screen, viewable from all angles, even in polarized glasses Reliable twist-lock connector system for easy installation in any boat or kayak SD card slot for software updates, Genesis Live recording, and charting add-ons. See fish hiding in cover with FishReveal™ mode Increase contrast and viewability with Imaging color palettes What’s in the Box? Eagle 7 Display SplitShot HD Transducer Bullet/SplitShot™ Transom Bracket  C-MAP Discover OnBoard™ charts for the US and Canada Power Cable, with fuse and connectors Eagle 7 Bracket and mounting hardware Spotlight Feature Icons: CHIRP DownScan FishReveal IPS Screens Autotuning Sonar

i50/i60 Wind, Speed, Depth System Pack with Transducers  Includes: E70058 - i50 Speed Instrument E70673 - ST900/P120 S/T Thru Hull - 13.7m Cable E70059 - i50 Depth Instrument M78713-PZ - P319 LP Thru Hull Depth Transducer E70061 - i60 Analogue Wind Instrument E22078 - Short Arm Wind Transducer i60 SeaTalkng Instruments The  i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i60 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i60 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i60 Wind Instrument with Windvane Transducer Full-featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting, and high-contrast text and graphics. Short arm vane supplied with 30m (97.5') cable Compatible with Raymarine's masthead transducer (recommended for sailboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems Large, crisp LCDs with high contrast for excellent visibility Red backlighting for outstanding night-time visibility SeaTalkng and SeaTalk-1 Networking for maximum flexibility Fully compatible with i70, p70 and p70R Color Instruments and Autopilots 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy i50 SeaTalkng Instruments  The  i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i50 Speed Instrument  The i50 Speed Instrument offers easy-to-read displays of boat speed through water, GPS speed over ground (SOG), velocity made good (VMG), average speed, and max speed, distance log, trip log, and water temperature. i50 Speed also includes a count-up timer and 2 race-start timers. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 speed displays Built-in speed transducer connection i50 Depth Instrument  The i50 Depth Instrument offers accurate and reliable displays of depth, max depth, and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarm. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 depth displays Built-in depth transducer connection i50 Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems. Large, crisp LCDs with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70, and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

i60 SeaTalkng Instruments - Wind w/Wind Vane Transducer The all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays. For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i60 Wind Instrument w/Windvane Transducer Full featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics. Short arm vane supplied with 30m (97.5') cable Compatible with Raymarine's masthead transducer (recommend for sailboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed. Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

Wind Repeater Display Add or replace the display on the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.  The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence. Technical Specifications: Works with NMEA 0183 NMEA protocol  7 levels of display backlighting Dimensions  (H x W x D) - 4.33" x 4.33" x 1.18" (110 x 110 x 30mm) In the Box: 16.5' (5 M) Cable Mounting 'O' ring  Weather cover *Sold as Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Clipper NMEA 2000 Compliant Wind System The Wind System consists of the version 2 mast head sensor and a small translator box, the box is fitted with a ‘micro-c’ connector which plugs directly into an existing NMEA 2000 network. NMEA 2000 Compliant Wind system is supplied complete with masthead unit, 20 meters of cable, mast head unit mounting hardware and the translator box with Micro C connector cable. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MeteoMan Barometer The rate of change of barometric pressure and history of wind speed can be an invaluable indicator of imminent conditions. Many sailors rely on low cost domestic barometers, which are inaccurate, have low resolution and very poor history. Several quality paper recording instruments exist but are delicate, fiddly to use and rely on paper which can jam when damp. The MeteoMan overcomes all these problems. It provides an accurate, high resolution barograph recording in excess of five days data on barometric pressure and wind speed. It is easy to use, reliable, rugged and draws very little power from the boat's battery. The MeteoMan is available with an optional NMEA Wind sensor which provides wind direction, wind speed and external temperature. The Meteoman provides reliable meteorological information for the yachtsman. The main display shows the wind speed and direction, the ambient temperature and the barometric pressure. To assist in predicting future trends the unit also displays a precision barograph and an anemograph showing barometric pressure and wind speed for the previous five days. In addition to the meteorological functions the unit includes a marine chronometer, a stop watch, a race countdown timer, display of internal temperature and battery voltage. MeteoMan can be connected to an NMEA Clipper Wind system where it will get wind speed/direction data via the Clipper wind output. NMEA Wind Sensor supplied with mounting brackets and 20 metres of two core screened cable. NMEA 0183 sentences: Wind speed/direction MWV Temperature XDR MeteoMan specifications Atmospheric pressure range 850 to 1100mb (user adjustment to compensate for altitude) Pressure history Range 1 950 to 1050mb Range 2 980 to 1030mb with 0.5mb resolution Recording time 0 to 120 hours 0 to 60 hours 0 to 30 hours Wind speed (when fitted with NMEA wind sensor) Maximum speed 100 knots Wind speed history Range 1 0 to 100 knots Range 2 0 to 50 knots Range 3 0 to 25 knots Recording time 0 to 120 hours 0 to 60 hours 0 to 30 hours Wind direction (when fitted with NMEA wind sensor) 0 to 360 degrees (in relative mode) Port 180 degrees to Starboard 180 degrees (innautical mode) Displayed in analogue and digital format Resolution 1 degree Real time clock 12 or 24 hour format Race countdown timer 10 and 5 minutes Stop watch with split timing Temperature Outside temperature (when fitted with NMEA wind sensor) Cabin temperature Resolution 1 degree centigrade Supply voltage 9.0 to 15.0 volts The voltage is shown on the display with a resolution of 0.1 volts Supply current Operating current 100mA (when fitted with NMEA wind sensor) Operating current 150mA (with backlight illuminated)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i70s System Pack with Color Instrument & Wind, DST Transducers, iTC-5, 3M Backbone, T-Piece, Power & 2 Backbone Terminators  Instrument Data is Now Beautiful Maximum Visibility and Maximum Versatility The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1” display the i70s is easy-to-customize with digital, analog and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours. Features: 4.1” super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle New glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover *NMEA2000 certification pending. A DeviceNet to SeaTalkng adaptor is required for connecting the i70s to NMEA2000 backbone. Intuitive LightHouse User Interface The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s. Networking Raymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks. AIS Repeater Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information. Transducer Connectivity Pair i70s instruments with the innovative iTC-5 instrument transducer converter for seamless integration with analog depth, wind, speed, compass and rudder transducer. Alternatively, you can network the i70s to DST800 and p79s Airmar smart tranducers. Customization The Raymarine i70s instrument is easily customized to suit your personal boating requirements. From traditional analog dials to engine information and tank levels, i70s has the capabilities to show it all. Package Contains: 1ea E70327 i70s Instrument 1ea E70010 ITC-5 1ea A22154 DST800 Transducer 1ea E22078 Standard Wind Transducer 2ea A06031 Backbone Terminator 1ea A06064 5-Way Connector 1ea A06035 Backbone Cable 3M 1ea A06049 Power Cable

ST60 Long Arm Masthead Transducer Raymarine's ST60 Long Arm Masthead Transducer comes with a 30m cable.

Triton² Speed, Depth & Wireless Wind System Pack - Contains 2 Triton² 4.1" Color Display, DST810 Transducer, WS320 Wireless Wind Sensor & NMEA2000 Starter Kit The full-color Triton² displays provide sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms. Features Optical Bonding: Sporting an Optically Bonded 4.1-inch LCD display, Triton² allows you to see clearly in all conditions with its large clear color display 100% free from condensation or fogging. Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending the time available from your battery capacity. Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons. Intuitive design makes it easy to configure and use your display. Low Profile Design: At just 8mm thin the Triton² instrument adds a sleek look to any boat. Nearly half the dimension of its thick competitors, Triton² won’t get in the way, catch ropes or offend the eye! NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton² to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system. Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data. The Triton² is simple and quick to install Autopilot Integration: Triton² will display B & G Pilot data on a clear status screen. With the addition of a Triton² Pilot keypad, the instrument becomes a fully functional Pilot controller. Comes with N2K MICRO-C BACKBONE KIT - 000-10760-001 TRITON2 DIGITAL DISPLAY - 000-13294-001 (x2) WS320 (wireless) Interface - 000-14388-001  WS320 Wireless Wind Sensor - 000-14390-001 DST-810 DEPTH/SPEED/TEMP SENSOR - 000-15735-001

Triton² Speed, Depth & Wireless Wind System Pack - Contains Triton² 4.1" Color Display, DST810 Transducer, WS320 Wireless Wind Sensor & NMEA2000 Starter Kit The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms. Features Optical Bonding: Sporting an Optically Bonded 4.1-inch LCD display, Triton² allows you to see clearly in all conditions with its large clear color display 100% free from condensation or fogging. Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending the time available from your battery capacity. Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons. Intuitive design makes it easy to configure and use your display. Low Profile Design: At just 8mm thin the Triton² instrument adds a sleek look to any boat. Nearly half the dimension of its thick competitors, Triton² won’t get in the way, catch ropes or offend the eye! NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton² to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system. Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data. The Triton² is simple and quick to install Autopilot Integration: Triton² will display B & G Pilot data on a clear status screen. With the addition of a Triton² Pilot keypad, the instrument becomes a fully functional Pilot controller. Comes with N2K MICRO-C BACKBONE KIT - 000-10760-001 TRITON2 DIGITAL DISPLAY - 000-13294-001  WS320 (wireless) Interface - 000-14388-001  WS320 Wireless Wind Sensor - 000-14390-001 DST-810 DEPTH/SPEED/TEMP SENSOR - 000-15735-001

Triton² Speed/Depth/Wind System Pack - Wired Wind Pack The clearest, multi-purpose sailing instrument with dedicated sailing features. Features: Optically bonded 4.1-inch color display Transflective LCD technology for optimum sunlight viewing Unique sailing features including SailSteer and WindPlot Display wind, speed, depth, heading, autopilot status, and much more Easy to use, easy to install Low power consumption The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms. Specifications: Dimensions: 118 x 115 x 36 mm (4.6 x 4.5 x 1.4") Weight: 0.32 kg (0.7 lbs) Color: Black Display Size: 4.1" (diagonal). 4:3 Aspect ratio Display Type: Transflective TFT-LCD, bonded. White LED backlight Display Resolution: 320 x 240 pixels Illumination: White for day mode. Red, green, blue, or white for night mode What's in the box? 000-13294-001 Triton² Digital Display. 000-15735-001 IDST-810 active D/S/T TH plastic 235 kHz transducer. 000-10760-001 2k Backbone Starter Kit 000-14391-001 WS310 Wind Sensor 000-14396-001 N2K Wind Mast cable 20 m 000-14389-001 ws310 wired interface only

Eagle 9 with TripleShot T/M Transducer & Discover OnBoard Chart Eagle® was born to make fishing as simple and enjoyable as possible. Easy to use and quick to install, this model features a TripleShot™ HD Transducer with FishReveal technology and autotuning for a quick and optimal setup. An IPS screen provides higher resolution and visibility from all angles. This model also comes bundled with high-resolution C-MAP® Discover OnBoard™ charts for the US and Canada. Easy to Use Sonar TripleShot HD Have the best chance of finding fish with underwater views to the side and below the boat, all with one transducer. TripleShot™ HD features the fish-finding capability of wide-angle high CHIRP sonar and high-resolution images of fish-holding structures from SideScan and DownScan Imaging™. FishReveal™ Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.  Autotuning Simple autotuning sonar gives users the optimal settings from the start, so users don’t have to spend time trying to find them. Detailed Charting C-MAP Discover OnBoard US/Canada Bundle Spend more time fishing and less time searching, with high-resolution C-MAP® Discover OnBoard charts included for the US and Canada. With Eagle, users have all the details needed to discover and navigate to the best fishing spots, faster. Genesis Live Know the local waters better than anyone with the ability to create custom ½-foot contour maps of the local lake or uncharted water in real-time. Designed for Fishing IPS Screens See clearly wherever users go with an IPS screen, offering improved resolution, clarity, and visibility, even with polarized sunglasses in direct sunlight. Connector System Set up in an instant with Eagle’s improved twist-locking connector, promising easy installation and removal every time. One-Year Warranty Lowrance's priority is to give users superior quality products and a stress-free time on the water. Enjoy the feeling of fishing with peace of mind, thanks to Lowrance's one-year warranty guarantee. Features: Enhanced TripleShot™ HD Transducer with Autotuning Sonar C-MAP® Discover OnBoard™ charts for the US and Canada IPS screen, viewable from all angles, even in polarized glasses Reliable twist-lock connector system for easy installation in any boat or kayak SD card slot for software updates, Genesis Live recording, and charting add-ons. See fish hiding in cover with FishReveal™ mode Increase contrast and viewability with imaging color palettes What’s in the Box? Eagle 9 Display TripleShot HD Transducer Tripleshot Bracket C-MAP Discover OnBoard™ charts for the US and Canada Power Cable, with fuse and connectors Eagle 9 Bracket and mounting hardware Spotlight Feature Icons: CHIRP DownScan FishReveal IPS Screens Autotuning Sonar