|
12" Stainless Steel Gimbal Mount
Allows mounting of Cannon downriggers in flush mount rod holders
316 stainless steel
Polished to a mirror finish
Resists rusting pitting and corroding
|
112.13 |
|
|
9" Stainless Steel Gimbal Mount
These gimbal mounts are polished stainless steel and allow mounting of downriggers in 30x flush mount rod holders. Available in 9" or 12" tube lengths with 1 1/2" O.D. Tube.
Allows mounting of Cannon downriggers in flush mount rod holders
316 stainless steel
Polished to a mirror finish
Resists rusting pitting and corroding
|
112.13 |
|
|
Big Game 12" SS Gimbal Mount with 241L
1-3/4" dia tube x 12" in length
Scotty's Heavy Duty Big Game Stainless Steel Gimbal Mount Rod Holder works in conjunction with flush mount gimbal rod holders. Its made from heavy duty polished 304 stainless steel tubing and comes equipped with our locking #241 mount.Allowing you to fish your rod with any Scotty post mount rod holder quickly and easily at multiple angles. No drilling or mounting required.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
71.26 |
|
|
70 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 0 degrees
Bottom Style: Bar
Liner Color: Black
Inner Diameter: 1-5/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
Gimbal Bar: ¼ in. wide x ½ in. tall
|
57.22 |
|
|
70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 15 degrees
Bottom Style: Bar
Liner Color: Black
Inner Diameter: 1-5/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
Gimbal Bar: ¼ in. wide x ½ in. tall
|
57.22 |
|
|
70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 30 degrees
Bottom Style: Bar
Liner Color: Black
Inner Diameter: 1-5/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
Gimbal Bar: ¼ in. wide x ½ in. tall
|
57.22 |
|
|
Big Game 9" SS Gimbal Mount with 241L
1-1/2" dia tube x 9" in length
Scotty's Heavy Duty Big Game Stainless Steel Gimbal Mount Rod Holder works in conjunction with flush mount gimbal rod holders. Its made from heavy duty polished 304 stainless steel tubing and comes equipped with our locking #241 mount.Allowing you to fish your rod with any Scotty post mount rod holder quickly and easily at multiple angles. No drilling or mounting required.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
65.23 |
|
|
Stainless Steel Stud Mount Handrail - 12"
The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to the mounting surface your boat. Functional and attractive, with no visible mounting hardware.
|
29.82 |
|
|
Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 12"
These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.
|
33.85 |
|
|
Stainless Steel Side Mount LED Navigation Lights - 2 NM - Port & Starboard
LED Side Mount Side Lights 400079 are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw.
All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
84.44 |
|
|
5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G Radar
Includes ADA-R1 modular top plate.
Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel.
This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
465.60 |
|
|
Shakespeare Style 81-S Stainless Steel Swivel Mount
Shakespeare's Style 81-S Swivel Mount is a dual-joint, free-pivoting base mount for use with an appropriate Shakespeare upper bracket in deck or side mounting large or small antennas. The mount's versatile action fits almost any mounting location, and permits easy lowering of the antenna for clearing overhead obstruction. It requires a stand-off upper bracket.
The Style 81-S Swivel Mount is included in the Style 410-R Mounting Kit.
Stainless steel construction
Standard 1" - 14 threads
|
64.79 |
|
|
Stainless Steel
Flush Mount
Swivel Rod Holders
80 Series
0°
10-1/2" Length
1-7/8" ID
Swivel base ideal for bent butt rod fishing
Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish
Cast 1-piece stainless steel swivel cup
Super smooth turning precision-machined 1/2" pivot with fine threads
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.03 |
|
|
Stainless Steel
Flush Mount
Swivel Rod Holders
80 Series
15°
10-1/2" Length
1-7/8" ID
Swivel base ideal for bent butt rod fishing
Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish
Cast 1-piece stainless steel swivel cup
Super smooth turning precision-machined 1/2" pivot with fine threads
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.03 |
|
|
Stainless Steel
Flush Mount
Swivel Rod Holders
80 Series
30°
10-1/2" Length
1-7/8" ID
Swivel base ideal for bent butt rod fishing
Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish
Cast 1-piece stainless steel swivel cup
Super smooth turning precision-machined 1/2" pivot with fine threads
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.03 |
|