|
Stainless Steel Swivel Base
Cast 316 stainless steel
Polished to a mirror finish
Risists rusting pitting & corroding
Swivel base has 16 (22.5°) locking points
Mounting hardware included
|
163.87 |
|
|
Low-Profile Swivel Base
Heavy-duty Lexan® and stainless steel swivel base. 1 1/8" tall. Six-point locking including two 45-degree positions. Measures 5" x 5" x 1 1/8". For all Cannon downriggers. Includes four 1/4" - 20 x 1 truss head screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
86.24 |
|
|
Stainless Steel Low-Profile Cable Seal for Cables 2-8mm
The DS-LP-16-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 73% in comparison to Scanstrut's DS16-P seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for 2–8mm cables (0.08"–0.35").
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
38.45 |
|
|
Stainless Steel Low-Profile Multi Cable Seal for Cables Up to 15mm
The DS-LP-MULTI-S Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 61% in comparison to Scanstrut's DS-MULTI seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for multiple cables up to 15mm (0.59”).
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
95.86 |
|
|
Stainless Steel Low-Profile Cable Seal for Cables 4-9mm
The DS-LP-21A-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 4–9 mm (0.15"–0.35") and connectors up to Ø21mm (0.82"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21A-P seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for 4–9mm cables (0.15"–0.35")
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
44.52 |
|
|
Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø30mm
The DS-LP-30-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14mm (0.3–0.5") and connectors up to Ø30mm (1.18"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to our DS30-P seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for 9-14mm cables (0.35"–0.55")
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
52.62 |
|
|
Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mm
The DS-LP-21B-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for 9-14mm cables (0.35"–0.55")
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
44.52 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 0°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 15°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 30°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
SW8 Anchor Swivel - 8mm Stainless Steel Jaw Jaw Swivel - f/11-16
lb. Anchors
Stainless Steel Jaw Jaw Swivel
|
19.16 |
|
|
SW10 Anchor Swivel - 10mm Stainless Steel Jaw Jaw Swivel - f/16-44
lb. Anchors
Stainless Steel Jaw Jaw Swivel
|
26.15 |
|
|
Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-Pack
Unlike the SOB standoffs which have a blind thread, the SOT series standoffs
have a thread which runs all the way through the barrel of the standoff.
This allows the standoff to be mounted from either side of the base. These
parts are manufactured in 316 stainless steel making them suitable for deck
applications. This standoff is inertial (friction) welded to the base
yielding a very strong part. The bases are all 1.25" in diameter. Use for
through deck mounting of hardware or anywhere you need a fixed female
thread.
|
55.69 |
|
|
Stainless Steel Cowl Vent with Base - 3" Hose
Cowl Vent with Base provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat's cabin or interior. Stamped 304 stainless steel construction with black plastic base. Designed for use with 3” ventilation hose. Installs with four #8 or #10 FH fasteners (not included).
|
39.04 |
|
|
Stainless Steel Heavy Stud 2" Base 3/8" x 16 Thread 2" Tall - 25-Pack
The HS200 stud is designed for heavy-load applications such as mounting filters and panels. The stud is inertial (friction) welded to a 2" base plate creating a very strong part. We offer two sizes. The stud is manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs and shear strength is 1,500 Lbs.
|
296.02 |
|