Offshore Stacker Adds the ability to fish at multiple depths off a single weight with the popular Offshore Line Release. Part Number: 2250107 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quick Stacker™ Attaches directly to your downrigger cable for stacking applications. Quick and easy to use with no twisting, winding, or looping to damage your line. Adjustable tension lets you match your line weight and fishing style. Part Number: 2250120-1 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Offshore Line Release Quick and easy to set even on turbulent waters; it wont damage your line by twisting, winding or looping. Spring-loaded "clothespin" design allows for all types of fishing. Part Number: 2250106 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Offshore Saltwater Line Release Corrosion-resistant, high-tension spring is designed for heavier saltwater lines. Troll at high speeds in deep water with its heavy-duty release. Anti-fouling pins prevent line from snagging behind the gripper pads. Part Number: 2250109 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

March 809 SS HS C Beer Pump     March Pump's 809-SS-HS-C Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7.5 gallons per minute at 3 feet, and its maximum head is 12.1 Feet (or around 5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.75 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The 809-SS-HS-C Beer Pump motor has a six foot cord, a plug, and a base.  The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.    Unit System 60Hz 50Hz Max Flow 7.5 GPM 26.4 LPM Max Head 12.1 FT 2.5 M Power .04 HP .029 KW Electrical 115V 50/60HZ       Type Centrifugal Mag Drive Inlet 3/4"MPT Outlet 1/2"MPT Wet End Stainless Steel (Front and Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Can handle liquids of 250F Materials are FDA Food Compliant With 6 Foot Cord and Plug Components are UL Recognized American Made      

Micropump GJ-N21.FF2S.C Pump Head C Mount Micropump 82059 GJJN21.FF2S.C  Mag-Drive Gear Pump Head Requires A-Mount compatible Drive 82059 is constructed of Base Material 316SS Gear Material PTFE Shaft Material 316SS

Micropump GA-T23.P9FS.C Pump Head C Mount Low flow pump head pressure 0.092 mL/revolution

Micropump GA-V23.C8FS.C Pump Head C Mount Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution Max Flow Rate (mL/min): 672 Flow Rate (mL/rev): 0.084 Min Flow Rate (mL/min): 12.6 Differential Pressure (PSI): 40 Differential Pressure (bar): 2.8 Max Motor RPM (rpm): 8000 Seal Material: PTFE Body Material: 316 SS Gear Material: Carbon graphite Relief Valve: No Run Dry: Under 30 seconds Duty Cycle Continuous: Yes Particulates: No Max Temperature ( F): 350 Min Temperature ( F): -50 Max Temperature ( C): 177 Min Temperature ( C): -46 Max Viscosity (cP): 100 Model Number: GA-V23.C8FS.C Part Number: 82117

March 815 PL C Beer Pump March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).   At 60Hz SystemUS                Metric Max Flow8 GPM  30.3 LPM Max Head18.6 FT  5.7 M Power0.04 HP        0.029 KW   At 50Hz USMetric 7.9 GPM30 LPM 13.5 FT4.1 M 0.04 HP0.029 KW   Electrical: 115V 50/60Hz or 230V 50/60Hz Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/2"MPT   Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 250 °F / 121 °C   Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.   The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.

Ampco Pumps C+114/C+214-BUNA Seal Kit Buna

Tuthill 2C2B-C-7 Mechanically Sealed Pump Tuthill 2C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT. Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT.

Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Tuthill 4C2EN-C-7 Pump 36Gpm 1 1/2 Ports With Tuthill 4C2EN-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Ball Bearing on Shaft. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Shaft Seal:Sleeve Bushing Lip Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Tuthill 4C2FV-C-A-7 Gear Pump (505000) Tuthill 4C2FV-C-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.  Shaft Seal:Sleeve Bushing Lip Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Groco S-87-C Tie Rod .250 X 15.313