3 Cylinder timer bases for Johnson and Evinrude outboards.

March 809 SS HS C 115V 50/60 115V 50/60 Beer Pmp/Base 6'

Oberdorfer 109MB-10J36BJ-50/60 Dometic Low Profile AC Pump  

Oberdorfer 300B-10J36BJ-50/60- Mpu W/316SS Shaft This item is 'build to order'. Please contact us for lead time.

March 809 PL HS 115V 50/60 115V 50/60 Pump/Base 6'

Oberdorfer 104M-06-10F36BJ Centrifugal Pump FEATURES Pump Body: Bronze Ports: Inlet: 3/4" NPT Outlet: 1/2" NPT Flow: 24 GPM Max Pressure: to 23 PSI, 53 feet of head Impeller: Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available. Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use Motor Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you. This pump has the 10F36BJ-50/60-316SS motor.   APPLICATIONS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.   Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.   Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor 50/60 Hz, with 316SS Shaft    

Oberdorfer 104M-06-10F36BJ-50/60 Low Profile AC Pump Pump Body: Bronze Ports: Inlet: 3/4" NPT Female Outlet: 1/2" NPT Female and 3/4" NPT Male Flow: Up To 24 GPM Maximum Pressure: Up To 23 PSI, 53 feet of head Impeller: Bronze Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Water Seal. Buna is Standard, Viton and Teflon available. Shaft: 416 Stainless Steel is Standard, 316 Stainless Steel is an Upgrade, Monel is the Highest Grade of Stainless Steel and is Recommended for Salt Water Marine Use Motor: 1/2 Horsepower, 3450 RPM, 115/230 Volts, Single Phase, ODP (Open Drip Proof). This pump has the Oberdorfer 7881 motor     APPLICATIONS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA J-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures. Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.

9 amp stators for 2, 3, 4 and 6 cylinder outboard engines.

Fits: OMC 50-60 HP 2-cylinder. Replaces: OMC. 384163, 387684, 389275, 585063, 586280. 9-tooth drive gear. Uses DV371* replacement drive gear, DVK71* 2-piece drive kit (fits current-model starters), SR371 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

March 815 PL C Beer Pump March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).   At 60Hz SystemUS                Metric Max Flow8 GPM  30.3 LPM Max Head18.6 FT  5.7 M Power0.04 HP        0.029 KW   At 50Hz USMetric 7.9 GPM30 LPM 13.5 FT4.1 M 0.04 HP0.029 KW   Electrical: 115V 50/60Hz or 230V 50/60Hz Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/2"MPT   Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 250 °F / 121 °C   Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.   The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.

Power packs for Johnson & Evinrude 3 and 6 cylinder outboards.

20 amp stators for 4 cylinder engines.

Resettable circuit breaker for internal electrical/ignition system.

March 0140-0011-1000 Motor 230V 50/60 Cyc  

Goulds E10774A Motor 5Hp 3Ph 50/60 208-230