Ignitions for Yamaha outboards.

20 amp stators for 4 cylinder engines.

IG017 Ignition Pack for Yamaha Outboard Engines This ARCO ignition pack is designed for specific Yamaha outboard engines. Fits: Yamaha 9.9 (1984-95), 15 (1984-95), C25 (1990-97) Mariner 9.9, 15, 20 & 25HP Replaces: YAMAHA Ignition Pack 695-85540-11-00 YAMAHA Ignition Pack 695-85540-12-00 YAMAHA Ignition Pack 695-85540-10-00 MERCURY Ignition Pack 43077T MERCURY Ignition Pack 43077M MERCURY Ignition Pack 96450M SIERRA Ignition Pack 18-5131 CDI ELECTRONICS Ignition Pack 117-695-11 Warranty Information When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.

IG026 Ignition Coil for Yamaha Outboard Engines This ARCO ignition coil is designed for specific Yamaha outboard engines. Fits: Outboard engine 115-225HP; L200, L150, L130, 115, 130, 150, 175, 200, 225 Replaces: YAMAHA Ignition Coil 6E5-85570-11-00 YAMAHA Ignition Coil 6E5-85570-10-00 SIERRA Ignition Coil 18-5110 CDI ELECTRONICS Ignition Coil 187-6511 Warranty Information When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.

Sierra fuel pumps for Yamaha outboards.

Sierra water pump kits for Yamaha outboard engines.

Sierra lower unit seal kit for Yamaha engines.

Sierra head gaskets for Yamaha outboard engines.

Sierra thermostat kits for Yamaha outboard engines.

Sierra carburetor kits and replacement parts for Yamaha outboards.

GP2170-06 SystemPod Pre-Cut for Garmin 1020/1020xs/1040xs & 2 Instruments for 12" Wide Guard NavPod GP2170 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.750"H x 23.25"W x 6.75"D Usable Face: 9.9"H x 20.5"W x 5.375"D Max Cutout: 9.125"H x 20"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP1176 SystemPod Pre-Cut for Simrad NSS12 evo2 or B&G Zeus² 12 & 2 Instruments for 9.5" Wide Guard NavPod GP1170 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.750"H x 23.25"W x 6.75"D Usable Face: 9.9"H x 20.5"W x 5.375"D Max Cutout: 9.125"H x 20"W Instrument Cutout: 3.6" All SystemPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP2080-14 SystemPod Pre-Cut for Raymarine a95/a97/a98 & 2 Instruments for 12" Wide Guard GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.5"H x 19.75"W x 6.5"D Usable Face: 9.5"H x 17"W x 5.5"D Max Cutout: 9.375"H x 17"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP2080-13 SystemPod Pre-Cut for Garmin 820/820xs/840xs & 2 Instruments for 12" Wide Guard GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.5"H x 19.75"W x 6.5"D Usable Face: 9.5"H x 17"W x 5.5"D Max Cutout: 9.375"H x 17"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP2170-04 SystemPod Pre-Cut for Raymarine a125/a127/a128 & 2 Instruments for 12" Wide Guard NavPod GP2170 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.750"H x 23.25"W x 6.75"D Usable Face: 9.9"H x 20.5"W x 5.375"D Max Cutout: 9.125"H x 20"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions