AMT Pump HP02-99-09 Piston Drum Pump 3/4 Poly Model HP02-99 Features: Polypropylene Construction with Kynar Seals and Ryton® Piston Ring Delivers 13 oz. per Stroke Polypropylene Construction with Stainless Steel Components • Kynar Seals and Ryton® Piston Ring • Maximum Temperature 130° F • 13 oz. per Stroke • 3/4" NPT Discharge Port • 3/4" x 40" Polypropylene   Suction Tube Assembly • 2" Polypropylene Bung Adapter Polypropylene Drum pump is designed for transfer and dispensing of liquids within a pH range of 4 to 11. Liquid types include many organic acids, alcohols and water soluble inorganic chemicals, which are compatible with pump component materials.

Groco Sp-99 Blades Set (4)  

Groco Sp-99-A Vane Pump Rotor, 8 Slots  

Jabsco X1990-99 114 Teflon Encap Vit O'Ring  

Amt 2850-99 Cast Iron 1 1/4" Self Priming Pedestal Pump AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000. • Cast Iron & Stainless Steel Construction • Buna-N Mechanical Seals on Cast Iron Models • Viton® Mechanical Seals on Stainless Steel Models • Optional Silicon Carbide Mechanical Seals Available • 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes • Dual Volute Design Reduces Radial Load on Motors • Maximum Temperature ◆ Buna-N 180° F ◆ Viton® 200° F • Self-Cleaning, Semi-Open Impeller • Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings

Amt 3826-090-99 Ci Ped W/3/4 Keyed Shft For  

Amt 3890-999-99 Keyed Shaft Pedestal  

Amt 3891-999-99 Threaded Shaft Pedestal  

AMT 4942-99, Rotary Drum Pump ROTARY DRUM PUMP   Type: Rotary Inlet: 1" Outlet: 1" Bung Adapter: Yes Construction: Ryton Seal: Teflon

AMT 5750-99, Piston Drum Pump 1" NPT Discharge Port PISTON DRUM PUMP • All Polyethylene Construction • Upper Temperature Rating: 158 degrees fahrenheit  

AMT Pump 3891-99 Threaded Shaft Pedestal

Micropump GA-V23.C8FS.C Pump Head C Mount Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution Max Flow Rate (mL/min): 672 Flow Rate (mL/rev): 0.084 Min Flow Rate (mL/min): 12.6 Differential Pressure (PSI): 40 Differential Pressure (bar): 2.8 Max Motor RPM (rpm): 8000 Seal Material: PTFE Body Material: 316 SS Gear Material: Carbon graphite Relief Valve: No Run Dry: Under 30 seconds Duty Cycle Continuous: Yes Particulates: No Max Temperature ( F): 350 Min Temperature ( F): -50 Max Temperature ( C): 177 Min Temperature ( C): -46 Max Viscosity (cP): 100 Model Number: GA-V23.C8FS.C Part Number: 82117

March 815 PL C Beer Pump March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).   At 60Hz SystemUS                Metric Max Flow8 GPM  30.3 LPM Max Head18.6 FT  5.7 M Power0.04 HP        0.029 KW   At 50Hz USMetric 7.9 GPM30 LPM 13.5 FT4.1 M 0.04 HP0.029 KW   Electrical: 115V 50/60Hz or 230V 50/60Hz Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/2"MPT   Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 250 °F / 121 °C   Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.   The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.

Groco S-87-C Tie Rod .250 X 15.313  

Groco Ht-3560-C Handle &Amp; Grip