Cal MS-900-6B Pump 900Gph 115V W/Base Cal Pump Centrifugal Pump, Stainless and Bronze Body, 900GPH No Flow Control, 115V 60Hz with 6 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 36,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets

Cal MS-1200-6B Pump 1200Gph 115V with Base and Cord Centrifugal Pump Stainless and Bronze Body 1200GPH No Flow Control 115V 60Hz with 6 Foot Power Cord 3/4" Male NPT Inlet and 1/2" Male NPT Outlet Viton Seal Can Run in Open Air or Submersed For Fresh or Salt Water up to 110F Can Be Used With Marine AC Units up to 60,000BTU Approved for: UL, CE, ABYC and USCG Includes 2 Nylon Mounting Brackets

Cal MS-900-6-2B Pump 900 Gph 220V W/Base Cal Pump Centrifugal Pump, Stainless and Bronze Body, 900GPH No Flow Control, 230V 50/60Hz with 6 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 36,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets

March 815 BR-C 115V Pump Assy W/Base 115V

Cal Pump MS320P-6B SS/Bronze Pump 375Gpm 115V Cal Marine are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard Premium stainless steel and bronze construction for longevity 115 Volts - 6ft power cord - 3 wire; black, white, green Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm) Can be used in hot water applications up to 110°F Extremely quiet operation Use submerged or in open air (below water level) Viton seals suitable for harsh marine applications 1/2" MPT Intake and 1/4" MPT Discharge Approximate dimensions: 3-3/4" x 4-1/2" One year warranty Pump Applications: Ideal for harsh marine applications

Cal MS-580-20-2B Pump 580Gph 230V 50/60 Cal Pump Centrifugal Pump, Stainless and Bronze Body, 580GPH No Flow Control, 230V 50/60Hz with 20 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 24,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets

Cal Pump MS-580-20 Pump 580Gph 115/120V 20'Cord Cal Marine Pumps are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard Premium stainless steel and bronze construction for longevity 115 Volts - 20ft power cord - 3 wire; black, white, green ( NO PLUG ON END ) Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm) Can be used in hot water applications up to 110°F Extremely quiet operation Use submerged or in open air (below water level) Viton seals suitable for harsh marine applications 3/4" MPT Intake and 1/2" MPT Discharge Approximate dimensions: 4-1/2" x 6-1/4"  

Cal Pump 305626012 Large Bracket S/MS580/900/1

Cal Msr-12 Repair Kit For 1200  Cal Pump Repair Kit for MS-1200 MS1200 Pumps, includes: Impeller, Volute, O-Ring, Hardware. No Flow Control Valve

Cal Pump MSUBM Nylon Bracket Fits All But 225 320 Nylon Mounting Brackets for 580, 900 and 1200 Pumps. Includes One Pair of Brackets.

March 809 PL HS 115V 50/60 115V 50/60 Pump/Base 6'

Cal Msub SS Mounting Bracket Cal Pump SS Mounting Bracket for MS225 and MS320 Pumps. Stainless steel construction All metal

March 0150-0251-0100 Magnetic Drive Pump AC-5M-MD March Pump’s industrial AC-5M-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 1 feet, and its maximum head is 27 Feet (11PSI). The pump is Ignition Protected per SAE J1171 and ISO 8846, and has extended run dry protection thru the use of a carbon bushing. It is capable of 48,000 BTU a hour.   Max Flow: 17 GPM Max Head: 27 FT Power: 0.125 HP   Electrical/Air: 115V 50/60Hz   Motor 3 Foot Cord 60Hz: 1Ph 115V 0.125HP/0.093kW, 2.1 AMPS, 3450 RPM   50Hz: 1Ph 115V 0.125HP/0.093kW, 1 AMPS, 2850 RPM   Inlet: 1"FPT Outlet: 1/2"MPT   Wet End: Polypropylene (Rear Housing, Impeller), Noryl (Front Housing) Buna N (O-Ring), 316 Stainless Steel (Shaft), Carbon (Impeller Bushing) Ceramic (Thrust Washers), Ceramic Magnet Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 190 °F / 87 °C Ignition Protected per SAE J1171 and ISO 8846: UL Listed Motor   This pump is capable of generating a maximum flow of 17 gallons per minute at 1 feet, and its maximum head is 27 Feet (11PSI).  It is capable of 48,000 BTU a hour.  The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Noryl,  Buna N, Carbon, 316 Stainless Steel, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius.     The pump is Ignition Protected per SAE J1171 and ISO 8846.  The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.  

March TE-5C-MD Mag Drive Pump 115V Applications for the TE-5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners. March Pump's industrial TE-5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 4 feet, and its maximum head is 29 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 male pipe thread. The standard motor is a 1 Phase 115/230V 0.2 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   Unit System 60Hz 50Hz Max Flow 18 GPM 60.5 LPM Max Head 29 FT 6.3 M Power .2 HP .149 KW Electrical 1PH 115/230V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 1/2"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers) Motor Options Available in Explosion Proof  

March Pump's AC-5B-MD Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for homebrewing. It is capable of generating a maximum flow of 17 gallons per minute at 1 foot, and its maximum head is 27 Feet (or around 11PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 225 Fahrenheit or 107 Celsius.  The AC-5B-MD Beer Pump pumps Hot Water and Hot Wort.     Unit System 60Hz 50Hz Max Flow 17 GPM 60 LPM Max Head 27 FT 6 M Power .125 HP .093 KW Electrical 115V 60Hz   Type Metering Pump Inlet 1"FPT Outlet 1/2"MPT Wet End Polysulfone (Front and Rear Housing, Impeller), Stainless Steel (Magnet Shell, Shaft), Buna N (O-Ring), Ceramic (Thrust Washers) Can handle liquids of 225F Materials are FDA Food Compliant American Made Components are UL Recognized