|
Remote Emergency Parallel Switch
The Remote Emergency Parallel Switch is used for convenient remote activation of the 10 minute emergency parallel function on motorized Voltage Sensitive and Emergency Paralell switches. It can be mounted standalone or within the Contour Connect panel range.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.33 |
|
|
Emergency Parallel Switch - 12/24V - 275A
This Motorized Switch offers remotely activated, high current, emergency parallel connection suitable for emergency starting of large engines (up to 2500A for 10 seconds).
The emergency parallel functionality is conveniently operated via a momentary button on the dash, which when activated, will parallel the batteries for 10 minutes. Once the 10 minutes has passed, the switch turns off, removing the risk of start batteries becoming flattened following a parallel switch being inadvertently left on.
Designed and constructed for the harsh marine environment, utilizing tinned copper conductors, stainless steel nuts, and high temperature, fiber reinforced plastics to ensure longevity. The units are ignition protected, provide On/Off switching operation, and may be recessed or surface mounted.
Features:
12/24 volt operation (both battery banks must be same voltage)
Manual override option
10 minute remotely activated emergency parallel function (no voltage sensitive function)
Technical Specifications:
Volts - 12/24V
Rating - 275A
Dimensions (L x W x H) - 2.7" x 2.7" x 4"
In the Box:
Parallel Switch
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
148.08 |
|
|
Emergency Parallel Switch - 12/24V - 500A
This Motorized Switch offers remotely activated, high current, emergency parallel connection suitable for emergency starting of large engines (up to 2500A for 10 seconds).
The emergency parallel functionality is conveniently operated via a momentary button on the dash, which when activated, will parallel the batteries for 10 minutes. Once the 10 minutes has passed, the switch turns off, removing the risk of start batteries becoming flattened following a parallel switch being inadvertently left on.
Designed and constructed for the harsh marine environment, utilizing tinned copper conductors, stainless steel nuts, and high temperature, fiber reinforced plastics to ensure longevity. The units are ignition protected, provide On/Off switching operation, and may be recessed or surface mounted.
Features:
12/24 volt operation (both battery banks must be same voltage)
Manual override option
10 minute remotely activated emergency parallel function (no voltage sensitive function)
Technical Specifications:
Volts - 12/24V
Rating - 500A
Dimensions (L x W x H) - 4" x 4" x 4.3"
In the Box:
Parallel Switch
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
210.26 |
|
|
Dual Operation VSS Switch Cont Motorized - 12V - 275A
This Voltage Sensitive Switch (VSS) automatically senses connected battery bank voltage and provides optimal, efficient charging of the second bank. The VSS allows for independent battery banks to be combined or isolated based on the presence of a charging source (such as an engine alternator or battery charger), while also offering remotely activated, high current, emergency parallel connection.
Designed and constructed for longevity in the marine environment with tinned copper conductors, stainless steel nuts, and high temperature, fibre reinforced plastics. The units are ignition protected, provide On/Off switching operation, and may be recessed or surface mounted.
The remote emergency parallel function can be operated through a momentary button on the dash which will parallel the batteries for 10 minutes. Once this 10 minutes has passed, if the voltage is high enough, the voltage sensitive switch will stay engaged. If not, it will disengage.
Features:
Dual battery sensing
Manual override option
Low power consumption (<6mA)
Technical Specifications:
Volts - 12V
Rating - 275A
Dimensions (L x W x H) - 2.7" x 2.7" x 4"
In the Box:
Parallel Switch
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
183.02 |
|
|
Dual Operation VSS Switch HD Optic - 12/24V - 500A
This Voltage Sensitive Switch (VSS) automatically senses connected battery bank voltage and provides optimal, efficient charging of the second bank. The VSS allows for independent battery banks to be combined or isolated based on the presence of a charging source (such as an engine alternator or battery charger), while also offering remotely activated, high current, emergency parallel connection.
Designed and constructed for longevity in the marine environment with tinned copper conductors, stainless steel nuts, and high temperature, fibre reinforced plastics. The units are ignition protected, provide On/Off switching operation, and may be recessed or surface mounted.
The remote emergency parallel function can be operated through a momentary button on the dash which will parallel the batteries for 10 minutes. Once this 10 minutes has passed, if the voltage is high enough, the voltage sensitive switch will stay engaged. If not, it will disengage.
Features:
Dual battery sensing
Manual override option
Dual 12/24 volt operation (both banks must be same voltage)
Low power consumption (<6mA)
Lowered cut in voltage (13.3/26.6V) suits low output alternators and high temperature environments
Technical Specifications:
Volts - 12/24V
Rating - 500A
Dimensions (L x W x H) - 4" x 4" x 4.3"
In the Box:
Parallel Switch
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
305.96 |
|
|
Emergency Parallel Battery Knob, Yellow Easy Fit
This battery knob option for 701 Switches is for applications where emergency parallel switch needs to be highlighted.
Order separately
Replaces existing knob
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.62 |
|
|
Remote Operated Battery Switch w/Optical Sensor
500A 12/24V
The MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters. The 720-MDO has been enhanced to offer easy standard installation, or advanced options capable of switching different voltage circuits from the main supply (for example: a 48 volt bow thruster with a 24 volt house supply). The optical sensor uses the same easy connection for standard installation and gives you the ability to control different voltage circuits such as 36 or 48 volts. It can be used to switch positive or negative lines and the main contacts can be isolated from the control circuit allowing operation via another battery source. This optical sensor also has low stand-by current draw (<5mA).
Remote operation
Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes. (Large cost and weight saving in copper cables)
Reduced installation labor due to shorter battery cable runs
Manual override option to meet CE/ABYC requirements
LED status identification for remote control switch
Same capacities/specifications and mounting options as standard BEP battery switches
Uses interchangeable labeling system (Item # 713 or 715)
Specifications:
LxWxH: 4" x 4" x 4.33"
Rating (A DC) Cont: 500
Rating (A DC) Inter: 700
Rating (A DC) Crank: 2500
Voltage (V DC): 9.5-32
Function: On/Off
Stud Size: 2x (1/2"/12mm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
209.41 |
|
|
Remote Operated Battery Switch, 275A Cont
The MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters.
Remote operation
Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes. (Large cost and weight saving in copper cables)
Reduced installation labor due to shorter battery cable runs
Manual override option to meet CE/ABYC requirements
Power Draw with switch off: 12mA
LED status identification for remote control switch
Same capacities/specifications and mounting options as standard BEP battery switches
Uses interchangeable labeling system (Item # 713 or 715)
Specifications
LxWxH: 2.7" x 2.7" x 4"
Rating (A DC) Cont: 275
Rating (A DC) Inter: 455
Rating (A DC) Crank: 1250
Voltage (V DC): 9.5-32
Function: On/Off
Stud Size: 2x (3.8"/10mm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
160.12 |
|
|
Remote Operated Battery Switch, 275A Cont - Deutsch Plug
The MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters.
Remote operation
Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes. (Large cost and weight saving in copper cables)
Reduced installation labor due to shorter battery cable runs
Manual override option to meet CE/ABYC requirements
Power Draw with switch off: 12mA
LED status identification for remote control switch
Same capacities/specifications and mounting options as standard BEP battery switches
Uses interchangeable labeling system (Item # 713 or 715)
Specifications
LxWxH: 2.7" x 2.7" x 4"
Rating (A DC) Cont: 275
Rating (A DC) Inter: 455
Rating (A DC) Crank: 1250
Voltage (V DC): 9.5-32
Function: On/Off
Stud Size: 2x (3.8"/10mm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
170.62 |
|
|
275A Cont Motorized Dual Operation VSS (Voltage Sensitive Switch) - Deutsch Connector
These Voltage Sensitive Switches (VSS) automatically sense connected battery bank voltages and provide optimal, efficient charging of the second bank. The VSS allows for independent battery banks to be combined or isolated based on the presence of a charging source (such as an engine alternator or battery charger), while also offering remotely activated, high current, emergency parallel connection.
Features:
Deutsch Connector
Dual battery sensing
Manual override option
Designed and constructed for longevity in the marine environment with tinned copper conductors, stainless steel nuts, and high temperature, fiber reinforced plastics
Features (Engine Run Sensing):
VSS will engage when the voltage on either start or house battery reaches 13.7 volts. If the combined battery voltage drops below 13.0 volts and the engine is not running, after 5 seconds the contacts will open and stay open until the start or house battery voltage exceeds 13.7 volts. If the combined battery voltage drops below 12.2 volts and the engine is running, after 5 minutes the contacts will open and stay open until the start or house battery voltage exceeds 13.7 volts. If voltage drops below 13 volts and stays above 12.2 volts on either start or house battery while engine is running, the VSS will stay engaged.
Features (Remote Emergency Parallel Function):
The 701-MDVS-D can be operated through a momentary button on the dash which will parallel the batteries for a present time of 10 minutes Once this 10 minutes has passed, if the voltage is up high enough for the voltage sensitive switch to operate, it will stay engaged. If not, it will disengage
The advantages of using a high current VSS is that it will cover your dual battery charging requirements and emergency parallel operation in one unit
Specifications:
Continuous Rating: 275 Amps DC
Intermittent Rating: 455 Amps DC
Cranking Rating: 1250 Amps DC
Voltage Rating: 9.5 - 32 Volts
Operation: On / Off
Mounting: Recessed or surface
Ignition: Protected
Stud Size: 2 x 10mm / (3/8-inch)
Power Draw: Switch off 12mA; Switch on 15mA; Switch operating 120mA for 3 seconds at 12v nomial
|
193.08 |
|
|
Single Engine w/Two Battery Banks w/Motorized VSR
The 80-716-0017-00 is an ideal replacement for a battery selector switch. Simply remove the selector switch and connect the existing wires to a 716 cluster. On this model, the VSR and emergency parallel switch are combined into one voltage-sensitive switch that can be remote operated. The 716 cluster is for use on charging systems up to 150A. To be used in single outboard systems with a dual battery bank or single alternator inboard engines with a dual battery bank. The 716 cluster replaces battery isolator systems.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
227.34 |
|
|
Twin Outboard Engine, Three Battery Banks w/Motorized VSR
The VSR and Emergency parallel switch are combined into one voltage-sensitive switch, and that switch is able to be remote-operated. The layout allows all cables to be attached from the bottom of the cluster.
Offers the same features as the 717-140A-DVSR
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
496.70 |
|
|
Remote Control Panel w/(2)2145 & (1)2146 Remote Control Contura Switch
Features:
Lockout slides reduce the risk of accidental switching
For use with two ML-Series Switches and one ML-Series Automatic Charging Relay
Includes labels illustrated only
Over 500 individual labels available
Specifications:
Positions:3
Nominal Voltage:12V DC / 24V DC
Height:4.75" (120.65mm)
Width: 4.88" (123.95mm)
Depth:2.00" (50.8mm)
Weight:0.83lb (0.38kg)
Included:
(2) - 2145 - SPDT Remote Control Contura Switch - (ON)-OFF-(ON)
(1) - 2146 - SPDT Remote Control Contura Switch - ON-OFF-ON
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
134.81 |
|
|
Remote Control Panel w/(3) 2145 Remote Control Contura Switch
Features:
Lockout slides reduce the risk of accidental switching
For use with ML-Series Switches
Includes labels illustrated only
Over 500 individual labels available
Specifications:
Positions:3
Nominal Voltage:12V DC / 24V DC
Height:4.75" (120.65mm)
Width:4.88" (123.95mm)
Depth:2.00" (50.8mm)
Weight:0.83lb (0.38kg)
Includes:
(3) - 2145 - SPDT Remote Control Contura Switch - (ON)-OFF-(ON)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
132.84 |
|
|
2155 - Remote Control Contura Switch with Lockout Slide
Vibration, shock, thermoschock, moisture and salt spray resistant
Lockout slide reduces the risk of accidental switching
Certifications:
Meets UL 1500 and ISO 8846 external ignition protection requirements
IP67 - Temporary immersion for 30 minutes
Technical Specifications:
Amperage Maximum Operating - 20A @ 12V DC and 15A @ 24V DC
Amperage Operating Current - 18mA
Pole/Throw - SPDT
Lighting - LED rated for a 1/2 life of 100,000 hours
Mounting Hole (H x W) - 1.45" x .83" (36.83" x 21.08")
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.47 |
|