BURKS 08988 Gasket Kit 7-7/16"OD

BURKS 8988, GASKET FLAT COMP 7 7/16 OD

Goulds 2K1023-4 7/16 Impeller  

Burks 09695 Sleeve Viton 2-3/16" X 7/16"

OBERDORFER 10631 PLUS GASKET KIT FOR N992 & N992R

BURKS GA6-1.5MV-5-11/16, PUMP END ONLY with VITON SEAL UNSPSC Code: 40150000

Myers Pumps 05014A166 Gasket Rubber Gasket, 2-1/8" OD

Myers Pumps 05014A167 Gasket Rubber Gasket, 8-3/4" OD

Rubber Gasket Kit for Size 8, 9, & 10 Strainers This gasket kit is for use on Perko intake water strainers. More specifically, this gasket kit fits Perko strainers that are sizes 8, 9, and 10. Kit Includes: Cover gasket  Rubber cylinder gaskets *Note that older model strainers utilizing cork cylinder gaskets must order the 99M Cork Gasket Kit, and newer model strainers must order the 99R Rubber Gasket Kit

Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex Key C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style. Features: Style: Adjustable Mid Mount Fits rails with 1-1/4" or 1-5/16" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Male Inlet/Gasket Kit The SmartPlug service kits provide all the electrical components, hardware, and gaskets required to replace or repair the products. Compatible With: Fits all non-metallic inlet SmartPlugs - BM30, BM50, BM16 and BM32 Features: Ease of Use – Easily replaces missing or damaged pieces Interchangeable – Works on all non-metallic SmartPlug Connectors *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FPP1530 Seal and Gasket Kit   Flotec- Seal and Gasket Kit for Flotec FP4012-08 and FP4022-08. Includes Water Slinger, Seal Plate O-Ring or Gasket, Shaft Seal, Diffuser Pad, and Diffuser O-Ring or Gasket. This Kit Does Not Fit The FP4012-10 or FP4022-10 Pumps. Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same  

Impeller Kit Material:Neoprene Drive Type:Key Drive Number of Blades:12 Dimensions: Diameter:2-7/16" Shaft Width:5/8" Shaft Diameter:1-1/4 Insert Material:Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Series 40 AP Sheave - Acetal Solid Bearing - 40mm(1-9/16")OD Precision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. Acetal Sheaves: Choice of bearings Solid bearing - high strength and durability, utilizing the self-lubricating properties of Acetal U.V. resistant Acetal sheaves

Race Sheave - Acetal Ball Bearing - 50mm(1-15/16") OD Precision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. Acetal Sheaves: Choice of bearings Solid bearing - high strength and durability, utilizing the self-lubricating properties of Acetal U.V. resistant Acetal sheaves