|
Bosworth 400-H-Ale-1/2"F Guzzler 1/2" Hand Pmp,Tappd
Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1/2" Female Threaded Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability
|
108.13 |
|
|
Bosworth 400H Guzzler 1"Hnd Pmp,Smth Prts
Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1" Smooth Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle
|
79.27 |
|
|
Bosworth 400-H-Ale Guzzler 1" Hand Pump,Smooth
Bosworth- Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1" Smooth Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability
|
106.08 |
|
|
Bosworth 74-A Foot/Check Valve 1/2"F
Bosworth Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1/2" Female Threads
|
13.51 |
|
|
Bosworth 100-A Strainer Check Valve 1/2"F
Bosworth Strainer Check Valve, Buna Flapper Valve, 1/2" Female Threaded Port
|
15.09 |
|
|
Bosworth 400 Service Kit W/Diaph &Amp; Duck
|
46.43 |
|
|
Bosworth 2400 Sanitary Hand Pump
Bosworth Hand Diaphragm Pump Guzzler FDA Approved Natural Delrin, .44Qt per Stroke, 1” Smooth Ports, White Buna Flapper Valves, Silicone Diaphragm, Horizontal Handle.
|
110.37 |
|
|
Bosworth 2800-B Guzzler Brz Peo 56C
Bosworth Diaphragm Pump End Only Guzzler Bronze, 13.4GPM, 2” Smooth Ports, 56C Motor Flange, Buna Flapper Valves and Diaphragm
GE-2600B Requires 1/2HP Motor
|
1945.86 |
|
|
Bosworth 2800 Guzzler Aluminum Pump
Bosworth Diaphragm Pump End Only Guzzler Aluminum, 13.4GPM, 2” Smooth Ports, 56C Motor Flange, Buna Flapper Valves and Diaphragm
2800 Requires a 1/2HP Motor this is the pump only
|
1881.30 |
|
|
Bosworth 2600-1 1/4F Alum Hand Pump, Thr Ports
Bosworth Hand Diaphragm Pump Guzzler Epoxy Coated Aluminum, 1.4Qt per Stroke, 1 1/4” Female Threaded Ports, Buna Flapper Valves and Diaphragm, Universal Handle for Vertical or Horizontal Pumping Action
|
601.26 |
|
|
Bosworth 2600 Bronze Hand Pump
Bosworth Hand Diaphragm Pump Guzzler Bronze, 1.4Qt per Stroke, 1 1/4” Female Threaded Ports, Buna Flapper Valves and Diaphragm, Universal Handle for Vertical or Horizontal Pumping Action
|
654.56 |
|
|
Bosworth 500H 1 1/2" Hand Pump
Bosworth- Hand Diaphragm Pump Guzzler Delrin, .67Qt per Stroke, 1 1/2" Smooth Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle
|
100.18 |
|
|
Bosworth 94-A Y-Valve W/Internal Threads
Bosworth Y-Valve Sea-Lect Gray Delrin In-Line 1/2” Female Threaded Ports
|
69.23 |
|
|
PP4406 PowerPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
Sizing :
Overall Size: 9"H x 10.2"W x 6"D
Usable Face: 5.6"H x 8.9"W x 3.75"D
Max Cutout: 4.625"H x 8"W
All PowerPods Include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4404 PowerPod Pre-Cut for Raymarine a75/a77/a78
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
Sizing :
Overall Size: 9"H x 10.2"W x 6"D
Usable Face: 5.6"H x 8.9"W x 3.75"D
Max Cutout: 4.625"H x 8"W
All PowerPods Include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|