|
BURKS 20522-6, Repair Kit for All CS6M Series Pumps
Repair Kit for All CS6M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
|
1332.12 |
|
|
BURKS 20522-9-MV REPAIR KIT FOR CS9MV Pumps
The Burks 20522-9-MV is a repair kit for all CS9MV series pumps with Viton seal, comes with the impeller, raceway, Viton shaft seal, Viton o-ring gasket, suction sleeve, raceway screws, impeller locknut, shaft key and instructions.
There is a 6 to 8 week Lead Time from time of order.
|
1860.48 |
|
|
BURKS 20522-7, Repair Kit for All CS7M Series Pumps
Repair Kit for All CS7M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
|
1350.48 |
|
|
BURKS 20522-5, REPAIR KIT for CS5M
Repair Kit for all CS5M Series Pumps this Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
|
1317.84 |
|
|
BURKS 20522-8, REPAIR KIT FOR CS8M
Repair Kit for All CS8M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
|
1638.12 |
|
|
BURKS 20522-9, REPAIR KIT FOR CS9M
Repair Kit for All CS9M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
|
1638.12 |
|
|
BURKS 20CS6M Close Coupled Turbine Pump
BURKS exclusive unique regenerative type turbine pumps. Designed to handle clear water in addition to and many other non-abrasive, lower viscosity liquids on high pressure. As well as low capacity applications with the greatest possible efficiency.
BURKS is the only turbine pump with Life-Lok® External Impeller Adjustment. This feature allows re adjustment of impeller without disturbing piping, disassembling pump or replacing parts. This, as a result, gives up to 40% longer service life than turbine pumps of other designs.
Self-Priming Pump
Compact and Space-saving size
No coupling so this eliminates misalignment problems
Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C).
Bronze impeller with Monel blades, therefore the only moving part
Bronze raceway with cast-in vortex pockets – will not vapor lock
#303 Stainless Steel pump shaft
Every pump is factory tested
Motor Information
4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and therefore Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.
CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor
start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.
High Temperature
For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications.
|
3161.06 |
|
|
BURKS 22850-6, Wet End Kits for Series CR6M Pumps
Repair Kit for All 3CR6M, A3CR6M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Impeller Locknut, and instructions.
|
728.28 |
|
|
BURKS 315CS6M TURBINE PUMP 230/460 Volts 1.5HP
All BRONZE Construction.
Close Coupled to a 11/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Self-Priming Pump
Compact and Space-saving size
No coupling so this eliminates misalignment problems
Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C).
Bronze impeller with Monel blades – therefore the only moving part
Bronze raceway with cast-in vortex pockets – will not vapor lock
#303 Stainless Steel pump shaft
Easy to service as a result
Especially relevant, Every pump factory tested
Motor Information
4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.
CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.
High Temperature
For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications.
For High Temp Models please use the Contact Us page, also use the Contact Us page for a Shipping Quote.
|
2882.48 |
|
|
BURKS 20158-6, REPAIR KIT FOR CT6M
Repair Kit for All CT6M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Impeller Locknut, and instructions.
|
1313.76 |
|
|
BURKS 20158-5, REPAIR KIT FOR CT5M
Repair Kit for All CT5M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Impeller Locknut, and instructions.
|
1316.82 |
|
|
BURKS 20158-7, REPAIR KIT FOR CT7M
Repair Kit for All CT7M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Impeller Locknut, and instructions.
|
1327.02 |
|
|
BURKS 10CS6M, TURBINE PUMP 115/230v 1PH 1HP BF
Close Coupled to a 1 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2568.53 |
|
|
BURKS 15CS6M, Turbine Pump 1.5HP 115/230v
Bronze Fitted Cast Iron Construction. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2820.38 |
|
|
BURKS 310CS6M, TURBINE PUMP 1 HP 3 PH 230/460 volts
Turbine Pump and Motor unit. Bronze Fitted Cast Iron Construction.
Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2407.24 |
|