Genoa Slide with Loop for 32mm Track Have a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4") 'T' track. All are manufactured from high-quality marine grade aluminum and finished with our unique 'Spectro' grey anodized finish for added protection. This slider has molded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion.  Features: 'Spectro' grey anodized finish The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Heavy-duty Genoa car options 32mm 'T' section track Drilled for fastenings and plunger stops. 'Spectro' grey anodized and supplied in metric lengths Specifications & Dimensions: Length: (mm) 109 / (inch) 4-5/16" Width: (mm) 52 / (inch) 2-1/16" Height: (mm) 50 / (inch) 1-15/16" Break Load: (kg) 2980 / (lbs.) 6,570 SWL: (kg) 1490 / (lbs.) 3,285  Weight (grams): 254 g

Genoa Car - Fits 25mm (1") T Track Features a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knob A popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection. Features: 'Spectro' grey anodized finish Anodized and supplied in metric lengths The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Heavy-duty Genoa car options Variety of applications on larger dinghies, dayboats, and light cruisers/racers Cars and sliders are compatible with all makes of 'T' track Modified slider inserts available for obscure sizes 25mm 'T' Section Track Drilled for fastenings and plunger stops Specifications and Dimensions: Length: 80mm (3.15") Width: 42mm (1.65") Height: 87mm (3.43") Sheave Ø: 40mm (1.57") Max Rope Ø; 2 x 12mm (2 x 0.47") Break Load: 2,280kg (5,026.54lbs) SWL: 1,140kg (2,513.3lbs) Weight: 247g (0.54lbs)

165mm Sliding Cleat - Fits 25mm T Track A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position. When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easy removal of the cleat.  Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required and removed when not in use - reducing deck clutter and rope snags. Compatible With: .98" (25 mm) wide "T' Track slider systems  Technical Specifications: Material (Cleat) - Nylon Material (Base) - Aluminum  Dimensions (Cleat length) - 6.49" (165 mm) Weight - 4.73 oz (134 g) *Sold as an Individual 

Shroud Cleat with Eye Barton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage. Features: Wide eye opening for stowage of shackles Clamps onto shroud wire without causing damage Simple and convenient to install Durable marine grade nylon construction Specifications: Color - Black Material - Nylon Length - 100mm (4") Weight - 26 grams In the Box: Shroud cleat w/eye Mounting hardware

Genoa Car - Fits 32mm (1-1/4") T Track Feature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is through-bolted and riveted for extra strength. A popular range of Genoa cars and sliders designed to run on a 32mm (1-1/4") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection. Molded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion. Features: 'Spectro' grey anodized finish The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Cars and sliders are compatible with all makes of 'T' track Modified slider inserts available for obscure sizes 32mm 'T' Section Track Drilled for fastenings and plunger stops. 'Spectro' grey anodized and supplied in metric lengths. Specifications and Dimensions: Length: 109mm (4.3") Width: 52mm (2.05") Height: 102mm (4.02") Sheave Ø: 50mm (1.97) Max Rope Ø; 2 x16mm (2 x 0.63") Break Load: 3,280kg (7,231.7lbs) SWL: 1,640kg (3,615.6lbs) Weight: 469g (1.03lbs)

Genoa Car - Fits 20mm (3/4") T Track Features a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knob A popular range of Genoa cars and sliders designed to run on a 20mm (3/4") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection. Features: 'Spectro' grey anodized finish Anodized and supplied in metric lengths The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Heavy-duty Genoa car options Variety of applications on larger dinghies, dayboats, and light cruisers/racers Cars and sliders are compatible with all makes of 'T' track Modified slider inserts available for obscure sizes 20mm 'T' Section Track Drilled for fastenings and plunger stops Specifications and Dimensions: Length: 60mm (2.4") Width: 34mm (1.34") Height: 65mm (2.56") Sheave Ø: 30mm (1.18") Max Rope Ø; 10mm (0.4") Break Load: 1160kg (2,557.4lbs) SWL: 580kg (1,278.7lbs) Weight: 119g (0.26lbs)

Towable Genoa Car - Fits 25mm(1") T-Track Towable genoa cars With tow eye or sheave in place of plunger, allowing a control line to be lead aft so that genoa car adjustments can be made from the cockpit. Use in conjunction with end fittings shown. Length:170mm Width:42mm Height:87mm Sheave Diameter:40mm Max Rope Diameter:2 x 12mm Break Load:2,280kg Safe Working Load:1,140kg Weight:297g A popular range of genoa cars and sliders designed to run on 25mm (1") 'T' track. All are manufactured from high quality marine grade aluminium and finished with our unique 'Spectro' grey anodised finish for added protection. All cars and sliders have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion. 'Spectro' grey anodised finish Stainless plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs

Size 3 Stanchion Lead Block - Single with Becket & Cam Cleat  Barton Marine's stanchion lead blocks have proven to be popular with Cruising sailors all over the World.  Mounted onto the stanchion base, the stanchion lead block enables the Genoa furling line to be led back to the cockpit for easy adjustment.  Ball bearing sheaves have a precision molded acetal sheave running on a significant diameter brass bearing, ensuring free running under the highest loads.   The unit will fully rotate about the swivel head to match your pulling angle.  Cam cleat will secure the line into place.   Block attachment to stanchion is by means of screwing together the integral Stainless Steel strap. Technical Specifications Sheave - Single Sheave Size - 1-3/4" (45mm) Maximum Rope Diameter -  3/8" (10mm) Safe Working Load - 881 lb (400 kg) Maximum Stanchion (Tube) Size - 1" (25mm)  *Sold as an Individual 

Size 2 Double Stanchion Lead Block Barton Marine's stanchion lead blocks have proven to be popular with Cruising sailors all over the World. Mounted onto the stanchion base, the stanchion lead block enables the Genoa furling line to be led back to the cockpit for easy adjustment.  Ball bearing sheaves have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.   The unit will fully rotate about the swivel head to match your pulling angle.  Block attachment to stanchion is by means of screwing together the integral Stainless Steel strap. Technical Specifications Sheave - Double Sheave Size - 1-3/8" (35mm) Maximum Rope Diameter -  5/16" (8mm) Safe Working Load - 815 lb (370 kg) Maximum Stanchion (Tube) Size - 1" (25mm)  *Sold as an Individual

Stanchion Lead Block Barton Marine's stanchion lead blocks have proven to be popular with Cruising sailors all over the World. Mounted onto the stanchion base, the stanchion lead block enables the Genoa furling line to be led back to the cockpit for easy adjustment.  Ball bearing sheaves have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.   The unit will fully rotate about the swivel head to match your pulling angle.  Block attachment to stanchion is by means of screwing together the integral Stainless Steel strap. Technical Specifications Sheave - Single Sheave Size - 1-3/8" (35mm) Maximum Rope Diameter -  5/16" (8mm) Safe Working Load - 815 lb (370 kg) Maximum Stanchion (Tube) Size - 1" (25mm)  *Sold as an Individual

Quick Cleat - 1/4" - Pair The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load limit of 66 lb (30 kg.)  Sold in pairs, the Barton Marine Quick Cleat offers exceptional value.   From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Barton Marine Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Material - Zytel nylon Working Load - 66 lb (30 kg) Maximum Rope Diameter - 1/4" (6 mm) Height - 1-1/16" (2.7 cm) Weight - 2.3 oz (65 g) *Sold as a Pair

Quick Cleat - 5/16" - White The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load limit of 154 lb (70 kg.)  The Barton Marine Quick Cleat offers exceptional value.  From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Color - White Material - Zytel nylon Working Load - 154 lb (70 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1-1/16" (2.7 cm) Weight - 2 oz (55 g) *Sold as an Individual 

Quick Cleat - 5/16" - Black  The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load limit of 154 lb (70 kg.)  The Barton Marine Quick Cleat offers exceptional value.  From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Color - Black Material - Zytel nylon Working Load - 154 lb (70 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1-1/16" (2.7 cm) Weight - 2 oz (55 g) *Sold as an Individual 

Quick Cleat - Stainless Steel - 3/8" The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger yachts and ships, workboats, catamarans, and fishing boats to hold marine and boat gear securely on lines up to 5/16" (10 mm.) The Barton Marine Quick Cleat offers exceptional value and takes the stress out of tying knots. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.  Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds. Features: Easy to use Quality engineered and manufactured Technical Specifications: Material - Marine-grade 316 Stainless Steel Working Load -1,188 lb (540 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1" (2.4 cm) Weight - 9.9 oz (280 g) *Sold as an Individual 

Fixed Bow Roller w/Loop Maxwell also featurs a Fixed Bow Roller with an Anchor Loop. Fixed with Loop: A - N/A B - 134mm (5-1/4") C - 75mm (3") D - N/A H - 65mm (2-9/16") H1 - 155mm (6-1/8") L - 460mm (18-1/8")