DO 550 Rope Clutch - Handle  Replacement handle for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual

DO 550 Rope Clutch - Cam  Replacement cam for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual

DO 550 Rope Clutch - Base Plate  Replacement base plate for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual

DO 550 Rope Clutch - Spring Assembly    Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual

DO 550 Rope Clutch - Double  The Barton D0 550 clutch is designed for cruising and racing yachts.  Manufactured from modern lightweight materials to withstand the harsh marine environment.  Moulded parts are from high grade plastics which are strong, light and impact-resistant.  Cams and bases are manufactured from marine grade 'Spectro' anodized aluminum, for high wear resistance and long life.  Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines. The true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage.  Released under load is positive and requires little effort.  The mechanisms opening and closing action is precise and easy to operate, even with cold, wet hands.   A unique feature of this design is the removable insert on the top face of the handle.  Pop this out and you can easily replace with printed colored inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc). The D0 550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts. Features: Modern high performance materials  True clutch mechanism  Protects lines Maintenance friendly Ergonomically designed Technical Specifications: Dimension (L x W x H)  - 5 ¼” x 2 ½” x 2 ½” (13.3 x  6.3 x 6.3 cm) Hole centres = 3 1/8” (79mm) Maximum Rope Capacity - .47” (1.2 cm) Maximum Holding Power – 1,212 Lb (550 kg) Weight - 1.2 lb (544 g) *Sold as an Individual 

Quick Cleat - 1/4" - Pair The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load limit of 66 lb (30 kg.)  Sold in pairs, the Barton Marine Quick Cleat offers exceptional value.   From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Barton Marine Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Material - Zytel nylon Working Load - 66 lb (30 kg) Maximum Rope Diameter - 1/4" (6 mm) Height - 1-1/16" (2.7 cm) Weight - 2.3 oz (65 g) *Sold as a Pair

Quick Cleat - 5/16" - White The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load limit of 154 lb (70 kg.)  The Barton Marine Quick Cleat offers exceptional value.  From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Color - White Material - Zytel nylon Working Load - 154 lb (70 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1-1/16" (2.7 cm) Weight - 2 oz (55 g) *Sold as an Individual 

Quick Cleat - 5/16" - Black  The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load limit of 154 lb (70 kg.)  The Barton Marine Quick Cleat offers exceptional value.  From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.   Features: Dupont Zytel Construction Easy to install Technical Specifications: Color - Black Material - Zytel nylon Working Load - 154 lb (70 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1-1/16" (2.7 cm) Weight - 2 oz (55 g) *Sold as an Individual 

Quick Cleat - Stainless Steel - 3/8" The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger yachts and ships, workboats, catamarans, and fishing boats to hold marine and boat gear securely on lines up to 5/16" (10 mm.) The Barton Marine Quick Cleat offers exceptional value and takes the stress out of tying knots. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.  Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds. Features: Easy to use Quality engineered and manufactured Technical Specifications: Material - Marine-grade 316 Stainless Steel Working Load -1,188 lb (540 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1" (2.4 cm) Weight - 9.9 oz (280 g) *Sold as an Individual 

Mast Base Organizer - 4 Block The Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodizing for a long-lasting finish. It accepts up to four double tang blocks mounted on individual stainless steel swivel posts but with three deck fixing points. The unit is fitted close to the mast base to accept halyards, reefing lines, and a topping lift. It is designed to work with our range of deck organizers, rope clutches, and winches, doing away with the need to leave the cockpit when reefing, hoisting, or lowering the mainsail. Specifications & Dimensions: Length: 160mm Width: 25mm Height: 28mm Weight: 166g Safe Working Load: 1,540kg Break Load: 3,080g Fixing Hole: 6mm Specification comprises: 'Spectro' anodized aluminum base Four stainless steel swivel posts with nylon base washers Four pairs of nylon packing washers for tang blocks Used in conjunction with series 1-4 01 090 to 04 090 single blocks

Quick Cleat - On a Patch for Inflatables - 1/4" The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The perfect solution for securing ropes onto inflatables, featuring a Quick Cleat mounted onto a Hypalon ™patch. The unit can be glued into position and has a working load of 30 kg. Ideal for RIBs, paddleboards and inflatable Kayaks where an easy, quick and simple solution is required for rapid tying of ropes horizontally or vertically. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.  Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds. Features: Dupont Zytel nylon construction fitted on a Hypalon pad Multi-weather adhesive tested up to 113° F (45° C) Technical Specifications: Material - Zytel nylon Working Load - 66 lb (30 kg) Maximum Rope Diameter - 1/4" (6 mm) Height - 1-1/16" (2.7 cm) Weight - 2.3 oz (65 g) *Sold as an Individual 

G-Force Trolling Motor Handle & Cable w/Trolling Motor Clamp - Red Endorsed and proven by Gerald "G-Man" Swindle. The patented G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Trolling Motor Handle & Cable - Black Endorsed and proven by Gerald "G-Man" Swindle. The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS* WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Trolling Motor Handle & Cable  - Red Endorsed and proven by Gerald "G-Man" Swindle. The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Rubbing Strakes - 203 x 19mm (7-7/8" x 3/4" By popular demand Barton Marine introduces a range of stainless steel rubbing strakes,to help prevent rope wear to deck edges and coamings.These attractive strakes are easy to fit and will last a lifetime.