|
Fiberglass Powder Cleaner - 26oz
Heavy duty fiberglass cleaner. Non-scratching formula removes dirt and stubborn stains. Ideal for non-skid surfaces! Removes rust stains, scuffmarks, and black streaks. Washes off with fresh or salt water. Leaves surface ready for waxing.
*Note: This product is available for ground shipping only.
|
17.32 |
|
|
Teak Brite® Powder Cleaner - Jumbo - 64oz
One-step heavy-duty powder cleaner for teak. Will not remove soft grain from wood like two-part cleaners. Cleans wood like new and leaves ready for teak oil sealer application. Designed for decks, swim platforms, furniture and horizontal surfaces.
|
26.39 |
|
|
Teak Brite® Powder Cleaner - Jumbo - 64oz *Case of 12*
One-step heavy-duty powder cleaner for teak. Will not remove soft grain from wood like two-part cleaners. Cleans wood like new and leaves ready for teak oil sealer application. Designed for decks, swim platforms, furniture and horizontal surfaces.
|
379.70 |
|
|
920 Fiberglass Marine Cleaner - 16oz
The ideal pre-wax item, No.920 cuts fast and finishes the smooth-removing film, mild-moderate UV oxidation/chalkiness, discoloration, and tough stains from fiberglass. Easy-to-use compound restores original color and gloss to facilitate the easy application of Collinite’s last-step waxes; improving wax bond, spread/coverage, and durability.
Features:
Removes mild-moderate oxidation
Removes black streaks
Removes tough stains a wash will not
Leaves a clean and smooth surface for follow-up wax
Applications:
For hand, dual action and rotary use
Average spread/coverage: 250-500 sq. ft.
Application By Hand:
Place a nickel-sized amount of product on an applicator pad
Rub in well over a section no bigger than a 2×2 ft. Use firm pressure and rub until just before the product starts to dry. Buff off with a microfiber towel to reveal a crisper, darker, and more reflective finish
Application by machine:
Place 5 small pea size dots onto the buffing pad. Do not over-saturate the pad. Only a small amount of product is needed
Place pad on panel and turn on buffer to 5800 opm (orbits per minute). Make 2-3 section passes with firm pressure no larger than a 2×2 ft section. Lower machine speed to 4800 opm and make an additional 2-3 passes with less pressure. Buff until just before product dries and never dry buff
Wipe off product residue from panel to reveal a clean, glossy, and beautiful finish
*Sold as an individual
|
8.33 |
|
|
920 Fiberglass Marine Cleaner - 64oz
The ideal pre-wax item, No.920 cuts fast and finishes the smooth-removing film, mild-moderate UV oxidation/chalkiness, discoloration, and tough stains from fiberglass. Easy-to-use compound restores original color and gloss to facilitate the easy application of Collinite’s last-step waxes; improving wax bond, spread/coverage, and durability.
Features:
Removes mild-moderate oxidation
Removes black streaks
Removes tough stains a wash will not
Leaves a clean and smooth surface for follow-up wax
Applications:
For hand, dual action and rotary use
Average spread/coverage: 250-500 sq. ft. (for the 16oz version)
Application By Hand:
Place a nickel-sized amount of product on an applicator pad
Rub in well over a section no bigger than a 2×2 ft. Use firm pressure and rub until just before the product starts to dry. Buff off with a microfiber towel to reveal a crisper, darker, and more reflective finish
Application by machine:
Place 5 small pea size dots onto the buffing pad. Do not over-saturate the pad. Only a small amount of product is needed
Place pad on panel and turn on buffer to 5800 opm (orbits per minute). Make 2-3 section passes with firm pressure no larger than a 2×2 ft section. Lower machine speed to 4800 opm and make an additional 2-3 passes with less pressure. Buff until just before product dries and never dry buff
Wipe off product residue from panel to reveal a clean, glossy, and beautiful finish
*Sold as an individual
|
29.04 |
|
|
Livewell & Baitwell Cleaner - 32oz
Cleans live wells and bait wells and deodorizes to leave a pleasant fragrance. Decreases spread of diseases amongst aquatic animals.
Live Well & Bait Well Cleaner will not harm fiberglass, painted surfaces, or corrode marine metals.
Directions: Fill well with water. Add cleaner and allow to sit for 30 minutes. Pump out and rinse thoroughly.
|
12.73 |
|
|
Livewell & Baitwell Cleaner - 32oz *Case of 12*
Cleans live wells and bait wells and deodorizes to leave a pleasant fragrance. Decreases spread of diseases amongst aquatic animals.
Live Well & Bait Well Cleaner will not harm fiberglass, painted surfaces, or corrode marine metals.
Directions: Fill well with water. Add cleaner and allow to sit for 30 minutes. Pump out and rinse thoroughly.
|
152.71 |
|
|
Serious Pad Cleaner - 12oz
Serious Pad Cleaner is scientifically formulated powdered cleaner for rejuvenating buffing pads. Mixed with water this cleaner dissolves compounds and waxes from wool, foam and blended buffing pads cleaning them to be used over and over.
For most pad cleaning applications Mix 2 scoops (scoop included) with 2 gallons of water. This will allow for 10-12 batches. Mixed solution can be used for upto a one week or until product nolonger breaks down and cleans pads, which ever occurs first.
Also great for cleaning dock lines along with microfiber and cotton bonnets.
MADE IN USA
Instructions:
In a plastic container, mix 1 scoop (included) or1 tbsp. of powder per 1 gallon (3.78 Litters) of warm water. Stir thoroughly. Mix only what is needed for application and use within 7 days of mixing or more often with heavy use. Soak items to be cleaned for up to 15 minutes. Agitate and Brush lightly. Thoroughly rinse area with clean water. For extremely soiled area, let solution soak in longer.
Buffing Pads
Wash your pads immediately for easiest cleaning. Serious Pad Cleaner & Rope Wash will remove caked on and saturated compounds ands waxes from your buffing pads. Let pads thoroughly air dry prior to using again.
Ropes & Dock Line
Wash annually or as needed. Serious Pad Cleaner & Rope Wash will remove stains from mold, mildew, algae, and dirt in ropes and dock lines. Agitate with Shurhold's Rope Brush for best results.
Safety & Handling
While this product is environmentally friendly and bio-degradable, please follow these warnings. This is a concentrated citrus cleaner and may irritate your skin with prolonged exposure. Due to its powerful cleaning properties, wear old clothes while using. Always wear protective gloves and safety glasses. Do not mix with bleach or any other concentrated chemical cleaners. Keep unused powder in a cool, dry place, out of reach of children and pets.
Caution:
Do not get in eyes, on skin, or clothing. Wash hands thoroughly after handling.
|
20.38 |
|
|
Fiberglass Rubbing Compound & Color Restorer - 16oz
Restores the original color and luster to your fiberglass boat by removing oxidation, chalking and fading. Will not harm or scratch gel coat. Unique formula seals, protects and prepares surface for waxing.
|
19.31 |
|
|
Fiberglass Rubbing Compound & Color Restorer - 16oz *Case of 12*
Restores the original color and luster to your fiberglass boat by removing oxidation, chalking and fading. Will not harm or scratch gel coat. Unique formula seals, protects and prepares surface for waxing.
|
231.73 |
|
|
Stainless Steel Cleaner - 16oz
Cleans and protects in one easy step. Non-streaking formula. Removes grease and stains. Easy spray-on, wipe-off. Leaves surface fingerprint resistant.
|
14.39 |
|
|
Stainless Steel Cleaner - 16oz *Case of 12*
Cleans and protects in one easy step. Non-streaking formula. Removes grease and stains. Easy spray-on, wipe-off. Leaves surface fingerprint resistant.
|
212.21 |
|
|
Yamada 770593 Ball Ndp-40
|
12.62 |
|
|
Micropump GJ-N25.PF1S.B Pump Head B Mount
Micropump 81809 GJ Series Pumphead with Port/fittings 1/8-27 (F) NPT Side Ports, Max Speed 5500 RPM, Max Pressure 300 psi and Max Temp 77 (C).
Micropump GJ-N25.PF1S.B Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81809 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS.
Pump Series: GJ Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 77
Max Diff. Pressure (psi): 69.6774193548387
Displacement (ml/rev): 0.91
Design: Standard Design
Gear Set: 0.500/2/24 (0.91ml/rev)
Gear Material: PPS (carbon fiber/ptfe)
Static Seals: PTFE Gasket (.004) 5369
Base Materials: 316SS
Drive Mount: MP Plate
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: PPS (carbon fiber/ptfe)
Shafts: 316SS
Gear Trim: None
Part Number: 81809
Model: GJ-N25.PF1S.B
|
974.34 |
|
|
Groco B-200 Motor Base Stamping, Blk
|
19.31 |
|