24V Buzzer w/Warning Light - Red Push-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings. Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12V Buzzer with Red LED Warning Light - Stainless Steel Buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch backlighting. The product line includes both switches and warning buzzers with LED light rings. Features: IP50 environmental protection buzzers 80-decibel buzzer sound intensity WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Push-Button Switch 24V Buzzer - Red LED Push-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers. Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Surface Strip Light w/Switch - White/Red LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

Newt - Livewell & Courtesy Light - Red Dimming Wet or dry, it doesn't matter. Lumitec's Newt line was originally designed as a livewell light. But when our customers saw its small size, amazing output, and ease of installation it found use under cabinets, in storage lockers, lighting toe kicks, and even overhead. Choose white, red, or blue light. Completely sealed and IP67 compliant. Silicone gasket included. Specifications: Voltage: 10 - 16V DC 12V DC Amps: 45mA 24V DC Amps: N/A Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 2 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 0.88" (2.22cm) Height: 0.88" (2.22cm) Depth: 0.78" (1.98cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Contour Series Drop-In Navigation Light - Red Port Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern. Features: Output: Port Red Visibility: USCG2NM Voltage: 10-30V DC 12vDC Amps: 18-26mA 24V DC Amps: 12-15mA Conforms to: ABYC A16

Oak Rock Accent Light - Red LEDs - White Housing Light up a console, compartments, under-gunnels, and much more with Black Oak's IP69K rated marine accent lights! This small yet powerful light has LEDs that are sure to provide users with the lighting needed while on the water.  Features: Red LEDs Activities & Uses:  Accent lighting Compartment lighting Map lighting Trailer lighting Console lighting Under-gunnel lighting Technical Specifications: Total Wattage: 9W Amp. Draw: 0.35 LED Quantity: 3 Weight: 0.35 lbs. Raw Lumens: 220 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Width): 2-3/4" x 1-1/2" x 3/8”  Hole to Hole Distance: 2" In the Box: (1) Accent light with positive and negative lead (1) Rubber mounting pad (1) Stainless steel screw kit *Sold as an Individual

MiniRail2 6" Light - Red Non Dimming Small. Attractive. Powerful. Made in the USA and priced right. What else could you ask for? Lumitec's MiniRail2 delivers. As with all Lumitec luminaires, the Rail2 is IP67 compliant, which means despite its great looks it is just at home on a spray-drenched hard top as a teak-adorned salon. Choose White, Red, or Blue output. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 360mA 24V DC Amps: 200mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 145 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 5.90" (14.97cm) Height: 1.11" (2.82cm) Depth: 0.60" (1.53cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ibiza LED Engine Room Light - Red/White Dimming - White Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C :-31/35 to + 131/55 F  Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Apeiron A3120 Screw Mount Light - Red, Warm White & Blue - Brushed Nickel The Apeiron A3120 is one light fixture with 3 colors on only 2 wires! You can use your existing switch and wiring to cycle through Red, White and Blue LED colors. Perfect for Hardtop, Cockpit and Arch Lighting. Specifications: 1.5 watts 9-30V DC input 3 Colors in 1 Fixture with only 2 wires 3" Diameter Stainless Steel Construction 316 SS Removable Trim Exterior Rated Screw Mountable IP67, Exterior Rated Up to 50,000 Hours of Operation 2007 IBEX/NMMA Innovation Award Winner Features: Advanced optical system - 120 degree full angle with even light, no LED "dots" or pixilation Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display 316 Stainless Steel Trim with PVD - Removable trim ring with Physical Vapor Deposition (PVD) coating to provide a very durable surface finish which will not tarnish or discolor Exclusive Technology: SmartDriver Technology - Integrated directly inside every fixture to connect the Apeiron to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple Tri-Light Technology - i2Systems Tri-Light Technology offers 3 colors of light within a single feature with only 2 wires Simply toggle the input voltage off and back on again to change from one color to the next

NaviLED 360, 2nm, All Round Light Red Surface Mount - Black Housing The ultra-reliable NaviLED 360 series has been updated to a new lower profile design with enhanced efficiency Maintaining the same mounting footprint and reliability of the original design, the new version also incorporates Grilamid® lens material for extreme durability. The NaviLED 360 PRO also now features Wheelmark certification across the complete range. Certified to 2NM visibility and suitable for vessels up to 50m, the White, Red and Green LED options make this series ideal for commercial vessels involved in fishing, trawling, towing, diving, pilotage duties or NUC. Black and white housings also allow the lamps to integrate with the style and colour of the vessel. Features: Modern lower profile design Wheelmark approval across the range Same mounting footprint Internationally approved Ultra low power consumption UV, corrosion & impact resistant Completely sealed IP67 Multivolt 12/24V DC 2 Nautical Mile visibility

HIT Hydrostatic Inflatable PFD w/Sailing Harness - Red/Black - Automatic/Manual This front entry PFD automatically inflates when submerged in 4” or more water pressure and features an integrated sailing harness for serious sailors.  The lightweight 500D Cordura® outer shell is durable, and the neoprene collar provides all-day comfort.  Heavy-duty stainless steel D-rings built into the front of the vest can attach to safety tethers.  The exclusive Hammar® Hydrostatic Inflator Technology (HIT) deploys only when submerged and not when hit with rain, spray, or humidity.  The SecureZip stays closed during high winds but opens easily on inflation.  A convenient window lets you check the indicator status, and you can also use the manual handle or oral tube to inflate the PFD at any time.  The water-resistant pocket secures and protects your essentials.  A whistle, strobe light holder, and SOLAR reflective tape all ensure additional on-the-water safety. *Upon inflation, it is essential to inspect and re-arm your PFD before next use. Features: Front entry with buckle for convenient donning and doffing Durable 500D Cordura® outer shell with reflective accents Neoprene Comfort Collar prevents chaffing SecureZip closure  Indicator window to check status (green means it's ready to go) Hydrostatic Inflator Technology (HIT) only inflates when submerged in 4” or more of water pressure  Manual inflation handle allows you to inflate the vest at any time Oral inflation tube for backup Water-resistant pocket  Two heavy-duty stainless steel D-rings for use with tethers Includes safety whistle for emergencies SOLAS reflective tape on inflation cell enhances visibility in low light conditions Holder for a strobe light Certifications: U.S.C.G. - Marine Buoyant Devices 160.076 - Type V Recreational  Technical Specifications: Color - Red/Black Inflation - Automatic/Manual CO2 Cylinder Size - 33 gram Size - Universal Adult Chest Size - 30" to 52" (76 to 132 cm) Weight Capacity  - ≥ 80 lb (≥36 kg) *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Waterproof IP68 LED Strip Lights - Red - 2M These LED strip lights provide excellent lighting, Silicone filled (not epoxy) for extensive UV protection. LED Strip Lighting offers the perfect solution to creating energy efficient,stylish task, accent and mood lighting. Strip lights are discreet, flexible, can be cut to size and they can be mounted virtually anywhere. IP20 for indoors and IP68 rated with extensive UV protection for outdoors makes these strip LED’s perfect for boating applications. Add one of the optional controllers and produce multiple colors, control brightness and create special effects. Features: 120 Degree Viewing Angle Efficient high output LED’s Works well in Marine, Auto and Home Applications

Waterproof IP68 LED Strip Lights - Red - 5M These LED strip lights provide excellent lighting, Silicone filled (not epoxy) for extensive UV protection. LED Strip Lighting offers the perfect solution to creating energy efficient,stylish task, accent and mood lighting. Strip lights are discreet, flexible, can be cut to size and they can be mounted virtually anywhere. IP20 for indoors and IP68 rated with extensive UV protection for outdoors makes these strip LED’s perfect for boating applications. Add one of the optional controllers and produce multiple colors, control brightness and create special effects. Features: 120 Degree Viewing Angle Efficient high output LED’s Works well in Marine, Auto and Home Applications

Waterproof IP68 LED Strip Lights - Red/Green/Blue - 2M These LED strip lights provide excellent lighting, Silicone filled (not epoxy) for extensive UV protection. LED Strip Lighting offers the perfect solution to creating energy efficient,stylish task, accent and mood lighting. Strip lights are discreet, flexible, can be cut to size and they can be mounted virtually anywhere. IP20 for indoors and IP68 rated with extensive UV protection for outdoors makes these strip LED’s perfect for boating applications. Add one of the optional controllers and produce multiple colors, control brightness and create special effects. Features: 120 Degree Viewing Angle Efficient high output LED’s Works well in Marine, Auto and Home Applications