|
Beckson Screw Type 1" Drain Plug
Screw-type drain plug with patented self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Part should be mounted in a 1" ID hole with two S/S fasteners and positioned with gap in thread at lowest point.
|
5.08 |
|
|
Beckson Screw Type 1" Drain Plug
Screw-type drain plug with patented self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Part should be mounted in a 1" ID hole with two S/S fasteners and positioned with gap in thread at lowest point.
|
5.08 |
|
|
SHURflo 1-089-00, Screw Hex Head
|
1.05 |
|
|
|
1.85 |
|
|
Shurflo 1-189-00 Screw Phillips Head
|
0.11 |
|
|
Vault Drain Plug
The Seaview Vault Series drain plug is engineered to screw right into the existing 1/2 NPT brass or stainless transom garboard.
Features:
Triangular ergonomic cap - no tools required
Fits all 1/2 NPT brass and stainless transom garboards
NPT thread and a backup O-ring - watertight fit
Floats if accidentally dropped in the water
Manufactured from durable marine-grade ABS
Direct replacement for black or white plastic, bronze, chrome, or brass traditional drain plugs. 114-02030410, 02030710, 50-18741, 18721
The matching garboard utilizes a gasket in place of messy silicone sealants
|
10.56 |
|
|
Vault Pro - Drain Plug & Garboard Assembly
The Vault Series drain plug with gasket and garboard.
Features:
Triangular ergonomic cap - no tools required
NPT thread and a backup O-ring - water tight fit
Floats if accidentally dropped in the water
Manufactured from durable marine-grade ABS
Direct replacement for black or white plastic, bronze, chrome, or brass traditional drain plugs. 114-02030410, 02030710, 50-18741, 18721
The matching garboard utilizes a gasket in place of messy silicone sealants
|
21.12 |
|
|
Screw-Out Deck Plate
The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur.
Center: White
Color: Beige
|
17.03 |
|
|
Drain Plug And Receiver Kit - 3/4" Diameter
The Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly.
Features:
Molded black plastic with threaded receiver
Molded retaining strap
Includes attaching screws and elastomeric gasket for a watertight fit
Specifications:
Diameter: (inch) 3/4"
*Intended for use on small recreational boats and jet skis
|
5.48 |
|
|
Drain Plug and Socket - White 15mm (19/32") Bore
This screw-type drain plug and the socket are still among the best available. Also, it's supplied with a rubber ‘O’ ring for a watertight seal.
|
4.84 |
|
|
Inteliplug ProXT Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail with Plug-and-Play Harness
The Seaview Inteliplug ProXT is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProXT comes with a hermetically sealed aeronautical grade sensor with a Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
Sensor with Deutsch DT04-2P plug pigtail including plug-and-play wire harness and alarm panel
|
129.60 |
|
|
Screw-Out Deck Plate
The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur.
Center: Clear
Color: White
|
22.02 |
|
|
Screw-Out Deck Plate
The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur.
Center: Smooth
Color: White
|
24.72 |
|
|
Screw-Out Deck Plate
The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur.
Center: Clear
Color: White
|
29.66 |
|
|
Screw-Out Deck Plate
The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur.
Center: Non-Skid
Color: White
|
24.01 |
|