|
Canoe/Kayak Pump
Features:
Diameter: 1-3/4"
Length: 18"
Strokes per Gallon: 8 strokes
Gallon per minute: 8 gallons
Mounting clips sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
30.18 |
|
|
Sea Kayak Pump w/Float-a-Pump Sleeve
Designed specifically with the Sea-Kayaker in mind, this upgraded version of our popular Canoe Pump includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't affect a compass.
A hose can be added for extended discharge.
The installed Float-a-Pump provides positive flotation for pumps dropped overboard.
Features:
Diameter: 1-3/4"
Length: 18"
Strokes per Gallon: 8 strokes
Gallon per minute: 8 gallons
Mounting clips sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.04 |
|
|
Thirsty-Mate Hand Pump with 20" Hose
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 18"
Diameter: 1-1/4"
Strokes/Gal: 10
Capacity: 6GM
Hose Length: 20"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.80 |
|
|
Little Giant Submersible Pump 527176
Little Giant NK-2 with 18' cord Submersible Pump
Motor 115 Volt 60 Hz 1/40 HP Permanently Lubricated Oil Filled Motor, 325 GPH at 1 Foot Head, Shutoff Head 12.3 Feet, Inlet: Screened, Outlet: 1/4" MNPT or 1/2" Tubing with Elbow Fitting and Garden Hose Adaptor, Nylon Body, Fluid Temperature Up to 120F (49C), 18 Foot Power Cord
527176 For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild chemicals such as soap solutions, acids, plating solutions and fertilizers
|
253.50 |
|
|
Micropump DG-F61.G1S2P5.J.B I Drive Motor J Mount
Micropump Brushless DC I-Drive
|
1869.44 |
|
|
MDM Pumps M3870-L 5Hp 3600Rpm 56J 208-230/
|
933.72 |
|
|
Sierra oil seals for water pumps in Mercury and Mercruiser engines.
|
17.99 |
|
|
Little Giant Submersible Pump 500500
Little Giant 1-AA-18 Submersible Pump
Little Giant Submersible Pump, 115 Volt 60Hz 1/200 HP Permanently Lubricated Oil Filled Motor, 170GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Snap Off Screen, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Epoxy Coated Aluminum Housing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 18 Foot Power Cord
500500 For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This pump is not recommended for aquariums, swimming pools and fuel oil transfer
|
191.10 |
|
|
Sherwood L-10B PUMP ONAN FITS MDL 6
|
861.38 |
|
|
Sierra water pump bases for Mercruiser pumps.
|
39.99 |
|
|
Sierra water pump bases for Mercruiser pumps.
|
35.99 |
|
|
CAL PUMPS
A/C Circulation Pump - Air Conditioning & Cooling - Air Conditioning - Seawater Circulation Pump - Magnetic Drive Small Pond Pump
CAL customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. Four different models are offered at CLR Marine with flow rates from 320 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 110°F!
6' power cords are standard.
Features & Benefits of the CAL PUMPS:
One year warranty
UL Listed for consumer confidence
Premium stainless steel and bronze construction for longevity
Six or twenty foot power cord for convenience
Suitable for fresh or salt water applications
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air
Corrosion resistant
115 or 220 volt motors
Thermally protected
Optional Mounting Bracket Available (model MSUB OR MSUBM)
Do Not Run Dry
Operate horizontal or volute down
MS320 have ½” MNPT intake and ¼” MNPT discharge
MS580, 900, 1200 have ¾” MNPT intake and ½” MNPT discharge
Cal 1200 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS1200
Cal 900 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS900
Cal 580 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS580
Cal 320 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS320
See all Cal Pump Products
S T A I N L E S S S T E E L & B R O N Z E P U M P S
Model
AMPS
(MIN/MAX)
WATTS
(MIN/MAX)
MAX
FLOW
MAX
HT.
1'
3'
5'
7'
9'
11'
13'
15'
17'
MS320
1.05-1.30
68-89
375
12.7'
360
335
305
262
215
-
-
-
-
MS580
2.15-2.55
138-203
860
14'
830
750
675
580
475
345
125
-
-
MS900
2.17-2.76
156-234
885
16'
855
790
725
650
560
460
350
175
-
MS1200
2.97-3.79
208-312
1100
18'
1070
1000
925
850
760
675
560
425
225
Cal Pumps at CLR Marine
|
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 24"
Diameter: 1-1/2"
Strokes/Gal: 7
Capacity: 8GPM
Hose Length: 24"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.64 |
|
|
Kayak Hand Bilge Pump
This Attwood Hand-Operated Bilge Pump quickly and safely removes unwanted water and other liquids from small craft such as kayaks, canoes, and small fishing boats. This pump can remove up to 8 gallons per minute, and no hose is required. The pump is an 18-inch-long pump and has an ergonomic hand grip that keeps the pump afloat if dropped into the water.
Features:
Ideal for small craft such as kayaks, canoes, and small fishing boats
(inch) 18" long
Sturdy, impact-resistant, and lightweight plastic construction
*No hose is required
|
21.55 |
|
|
Siphon-Mate Siphon Pump
Specialty Transfer Pump
Safety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle.
Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.
Features
Use for diesel, oil, water
Length: 11-1/2" (28.4cm)
Diameter: 1-1/4" (32mm)
Lifts: 4 oz (.12 L) per stroke
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.88 |
|