|
Flex-a-Pump Impossible Place Pumps
A Thirsty-Mate with extra reach! This pump can be permanently installed and will operate in any position. It comes complete with mounting brackets, intake hose and clamp, strainer, check valve and discharge hose. Ideal for small boats, engine compartments and much more.
Features:
Diameter: 1-3/4" (44 mm)
Length: 14" (35.6 cm)
Stroke: 12" (30.5 cm)
Gal/Min: 7.5 (28 L)
Outlet Hose: 2' (61 cm)
Intake Hose: 4' (1.2 m)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
74.20 |
|
|
Flex-a-Pump Impossible Place Pumps
A Thirsty-Mate with extra reach! This pump can be permanently installed and will operate in any position. It comes complete with mounting brackets, intake hose and clamp, strainer, check valve and discharge hose. Ideal for small boats, engine compartments and much more.
Features:
Diameter: 1-3/4" (44 mm)
Length: 14" (35.6 cm)
Stroke: 12" (30.5 cm)
Gal/Min: 7.5 (28 L)
Outlet Hose: 2' (61 cm)
Intake Hose: 6' (1.8 m)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
83.77 |
|
|
Thirsty-Mate High Capacity Super Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Capacity: 30 gal/min
Length: 33"
Diameter: 3"
Stroke Length: 19"
Intake Hose: 4'
Outlet Hose: 6'
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
326.08 |
|
|
Thirsty-Mate Hand Pump with 20" Hose
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 18"
Diameter: 1-1/4"
Strokes/Gal: 10
Capacity: 6GM
Hose Length: 20"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.80 |
|
|
Float-a-Pump Flotation Sleeve
Add a Float-A-Pump Sleeve (FPS-3R) to provide positive flotation in case the pump slips overboard. This bright red sleeve slides over the foot onto the pump body, providing high visibility as well as flotation.
Fits 124, 136 and 300 series pumps.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.76 |
|
|
Micropump DG-F61.G1S2P5.J.B I Drive Motor J Mount
Micropump Brushless DC I-Drive
|
1869.44 |
|
|
Oberdorfer N992-24C24B-W Gear Pump 24V Painted
FEATURES
Pump Body:
Bronze
Ports:
3/8" NPT
Flow:
5.9 GPM Max
Pressure:
150 PSI Max
Bearings:
Carbon Graphite Bearings, Self-Lubricating
Gears:
Durable bronze helical gears
Shaft Seal:
Buna Lip Seal Standard, Optional Viton Lip Seal.
Shaft:
303 Stainless Steel Shafts
Motor / Drive:
Compact close-coupled design attaches to motors with adaptor brackets. We have many motor options and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer Gear Pump, Bronze, 3/8"NPT Ports, Buna Lip Seal, 1/4HP 2400RPM 24V ODP Motor, Painted White
|
2101.32 |
|
|
Oberdorfer N992-C81-W Pump &Amp; Motor Painted White
FEATURES
Pump Body:
Bronze
Ports:
3/8" NPT
Flow:
5.9 GPM Max
Pressure:
150 PSI Max
Bearings:
Carbon Graphite Bearings, Self-Lubricating
Gears:
Durable bronze helical gears
Shaft Seal:
Buna Lip Seal Standard, Optional Viton Lip Seal.
Shaft:
303 Stainless Steel Shafts
Motor / Drive:
Compact close-coupled design attaches to motors with adaptor brackets. We have many motor options and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer Gear Pump, Bronze, 3/8"NPT Ports, Buna Lip Seal, 12V 1/4HP Motor, Painted White
|
1938.46 |
|
|
March 809 815 Series Mag-Drive Centrifugal Pumps
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze with Base 24VDC High Speed 7.5GPM 1/2"MPT Ports
|
498.00 |
|
|
Micropump GB-P23.PVS.A Pump Head A Mount
The GB Series magnetic drive gear pumps feature a suction-shoe design that self-compensates for wear, ensuring near zero slip and long pump life. Available in standard or custom configurations, GB Series pumps offer the flexibility to meet a wide range of applications with a compact size. Options include two standard gear sizes, an internal bypass, and variety of materials.
Displacement:
0.26 ml/rev (P23)
0.58 ml/rev (P25)
1.17 ml/rev (P35)
Recommended Speed Range: 500-5500 RPM
Flow Rate (min): 131 mL/min | 2.1 US gal/hr
Flow Rate (max): 6.4 L/min | 1.70 US gpm
Differential Pressure (max): 8.6 bar | 125 psi
System Pressure (max): 21 bar | 300 psi
Temperature Range: -46 to 177 °C | -50 to 351 °F
Viscosity Range: 0.5 to 1500 cP
Standard Ports: 1/8"-27 NPT(F)
|
1020.67 |
|
|
Micropump DB380.A with Bracket 24Vdc Motor A Mount
The DB-380.A is a 24VDC Brushless Drive for the popular GA, GB, and GJ series pumps. Designed for continuous duty and featuring 0-5VDC speed control and tach output, this drive performs well in a variety of applications. It differs from the DB-380.B only by the drive to pump mount configuration.
|
1776.40 |
|
|
Oberdorfer 406M Series Flexible Impeller Macerator
Pump Body: Bronze
Ports: Inlet: 1 1/2" Threads Outlet 1" NPT or 1 1/2 Hose
Flow: 25 GPM Max
Pressure: 44 PSI Max, 100 feet of head
Impeller: Neoprene Standard, Buna Optional
Shaft Seal: Mechanical Seal
Shaft: Stainless Steel
Motor / Drive: These Close coupled Rubber Impeller Pumps are mounted directly onto the electric motor without the use of a shaft coupling. This pump is coupled to standard motors with Nema C flange. It uses a motor adapter plate to accommodate the pump. We can supply additional motors and assemble for you.
CLOSE COUPLED RUBBER IMPELLER MACERATOR PUMP BRONZE
Portable. Compact. Easy Impeller Replacement. Macerator Easily Replaced. Reversible Wear Plate. Vacuum Switch Shut-off Pictured is Optional. Suction lifts of 15 ft. are possible when pump is fully primed.
Oberdorfer Flexible Impeller Macerator Pump, with 1HP, 24VDC, TEFC Motor, Painted White
This item is 'build to order'. Please contact us for lead time.
|
2146.25 |
|
|
Micropump GA-T23.J9FS.A Pump Head A Mount
The GA Series high-performance pumps provide precise and pulseless flows. Featuring Micropump's suction-shoe design, GA Series pumps self-compensate for wear, ensuring near zero slip and a longer pump life. Pumps are available in a wide range of materials and configurations.
Feature:
Small Size
Smooth, Pulseless Delivery
Chemically Resistant
Easy to Service
Proven Reliability
Advanced Pump Technology
Wide Range of Options
OEM Configurations
Enhanced Efficiency
Pump Series: GA Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 177
Max Diff. Pressure (psi): 75
Displacement (ml/rev): 0.092
Design: Standard Design
Gear Set: 0.125/2/40 (0.092 ml/rev)
Gear Material: PEEK (hex drive)
Static Seals: PTFE
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: None
Shafts: 316SS
Gear TrimNone
Model: GA-T23.J9FS.A
|
1147.03 |
|
|
Oberdorfer 405M-4-24N18Bct Pump 1Hp 1800Rpm 24V
FEATURES
Pump Body:
Bronze
Ports:
1" NPT and 1 1/2" Hose
Flow:
24 GPM at 20 feet of head
Impeller:
Neoprene Standard, Buna Optional
Shaft Seal:
Mechanical
Shaft:
Stainless Steel
Motor / Drive:
Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.
APPLICATIONS / CHARACTERISTICS
RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED
Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.
Oberdorfer Flexible Impeller Utility Pump, 1"NPT Ports, Neoprene Impeller, 1HP 24V 1800RPM TEFC Motor
|
1755.94 |
|
|
Oberdorfer 405M-4-12N18Bct Pump 1Hp 1800Rpm 12V
FEATURES
Pump Body:
Bronze
Ports:
1" NPT and 1 1/2" Hose
Flow:
24 GPM at 20 feet of head
Impeller:
Neoprene Standard, Buna Optional
Shaft Seal:
Mechanical
Shaft:
Stainless Steel
Motor / Drive:
Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.
APPLICATIONS / CHARACTERISTICS
RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED
Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.
Oberdorfer Flexible Impeller Utility Pump, 1"NPT Ports, Neoprene Impeller, 1HP 12V 1800RPM TEFC Motor
|
1893.53 |
|