|
Universal Mounting Bracket Kit
Our unique, three-sided bracket design features three precise angles that take into account the majority of the trailers' diverse tie-down tab designs.The three-sided bracket enables the BoatBuckle G2 to be moved several different ways,making it truly universal.
|
12.88 |
|
|
SnapIt! Marine BRK Pontoon Boat Universal Mounting Bracket
Universal Mounting Bracket. The use of additional mounting brackets allows the option of utilizing the removable accessories at different locations on the boat. Color: White.
|
4.50 |
|
|
Iridium GO!® Wall Mount Bracket Kit
The Iridium GO! Wall Mount Bracket Kit provides the ability to install the Iridium GO! in a vehicle or building with easy removal. It includes mounting plate, wall bracket, and screws (2 wood, 2 metal).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
42.67 |
|
|
120 Lower Mounting Bracket Kit
Used in conjunction with new XD and XDS Actuator applications. Includes all stainless steel hardware.
Specifications:
System Type: Single or Dual Actuator
Compatibility: Any Boat
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
20.03 |
|
|
Retractable Transom Tie-Down Bracket - Universal
This Rod Saver Universal Mounting Bracket Kit is designed to convert most trailer's existing mounting tabs to accommodate Rod Saver's RT40 Retractable This unique three-sided bracket design allows the RT40 to be mounted on several different trailer configurations.
|
13.13 |
|
|
Retractable Transom Tie-Down Bracket - 80 Degree
RTB 80 Retractable Transom Tie-Down Optional 8 Degree Bracket. This Rod Saver Universal Mounting Bracket Kit is designed to convert most trailer's existing mounting tabs to accommodate Rod Saver's RT40 & RT50 Retractables. This 3 sided 80 degree bracket is ideal for tight fits and flatbed and box trailers and can be mounted with several different trailer configurations.
|
13.13 |
|
|
Micropump DG-F61.G1R2P5.J.B I Drive Motor J Mount
Replacement for Micropump I-Drive IEG
J-mount, Speed Control(0-5VDC)
Micropump I-Drive IEG, 0-5 VDC SPEED CONTROL INPUT; J-Mount
|
1649.51 |
|
|
Micropump DG-F61.G1S2P5.J.B I Drive Motor J Mount
Micropump Brushless DC I-Drive
|
1869.44 |
|
|
1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)
The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
40.28 |
|
|
1" Diameter Ball Mount w/Short Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)
The RAM-B-111U-A consists of a short double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
31.63 |
|
|
Universal Actuator Mounting Bracket Replacement Kit
For use on 1 actuator
Universal Actuator Mounting Bracket replacement kit (for 1 actuator)
Includes:
15085-001: Upper Mounting Bracket With Gland Seal - Vandar - (3 Screw, 1 Wire)
50015-001D: Standard Upper Mounting Bracket - Vandar - (3 Screw, 1 Wire) (Thru 2007)
50014-001D: Standard Lower Mounting Bracket (3 Bolt) - Vandar
Hardware
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
28.12 |
|
|
RAM 6.25" X 2" Rectangle Base with 1" Ball
The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-B-111BU is compatible with the following electronic devices:
Garmin GPSMAP 162
Garmin GPSMAP 168
Garmin GPSMAP 175
Garmin GPSMAP 180
Garmin GPSMAP 180C
Garmin GPSMAP 182
Garmin GPSMAP 185
Garmin GPSMAP 188
Garmin GPSMAP 232
Garmin GPSMAP 238
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
13.99 |
|
|
1" Ball Mount with 6.25" X 2" Rectangle Base & Diamond Base
The RAM-B-111-238U consists of a double socket arm, 2.43" x 1.31" diamond base and 6.25" x 2" rectangle base. The diamond base contains two holes 1.912" from center to center, positioned at both ends of the base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
Weight: 0.66 lbs.
|
32.00 |
|
|
RAM Mixed Combination Pin-Lock™ Security Kit and 2.25" Diameter D Size Mount for Gimbal Brackets
The RAM-SG-D-111U-C consists of a 3.68" diameter round base, SHORT LENGTH double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock™ security nut/knob and key knob for Gimbal Brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts.
RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included threaded key knob replaces the gimbal knob, assuring your mounted electronic device is safe from theft and tampering.
Features:
Overall Height:
8.125"
Weight Capacity:
Up to 15 lbs.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
2.25" Rubber "D" Ball Size
Note:
The 11" x 3" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
132.65 |
|
|
RAM Pin-Lock™ Security Kit and 1.5" Diameter C Size Mount for Gimbal Brackets
The RAM-SG-111U consists of a 2.5" diameter round base, STANDARD LENGTH double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security™ nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included threaded key knob replaces the gimbal knob, assuring your mounted electronic device is safe from theft and tampering.
Features
Overall Height:
7.35"
Weight Capacity:
Up to10 lbs
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
67.36 |
|