2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud Terminal Specifications: Max Voltage: 300 V AC/48 V DC Number of Terminal Studs: 4 Terminal Type: 3/8" - 16 Stud WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2107 PowerBar 600AMP Cable Connector - 8 x 3/8" 16 Stud Terminal Specifications: Maximum Voltage: 300 V AC/48V DC Number of Terminal Studs: 8 Terminal Type: 3/8" - 16 Stud WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PowerBar Dual BusBar - Two 3/8"-16 Studs Provides compact high-ampere busing with 3/8" terminal studs Specifications: Maximum Amperage: 200A Maximum Voltage: 48V DC Number of Terminal Studs: 2 Terminal Type: 3/8"-16 Stud Bus Material: Tin-Plated Copper CDA 110/UNS11000 Weight: 0.32lb (0.15 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power Post 3/8 - 16 Stud • Insulated bases are glass-reinforced Nylon • All fasteners are galvanically compatible to reduce corrosion (ABYC E-11.16.3.2.) • Studs are 300 series stainless steel • Assembly includes stainless steel hex nut, split lockwasher, and flat washer • Rated for 48VDC Maximum • Current ratings are dependent on wire and terminal size utilized

Dual PowerPost Connectors Designed for connecting high amp conductors Includes one black and one red insulator WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM® Ball Adapter with 3/8"-16 Threaded Post The RAM-B-236-SEC1U consists of a 1" rubber ball connected to a 3/8"-16 threaded post. The thread length is 0.4".  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects the product packaged in a polybag. Weight: 0.05 lbs.

ML-RBS Remote Battery Switch with Manual Control Auto-Release - 12V Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing LED output to remotely indicate switch state - requires optional LED 3/ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance 7/ 8" (22mm) stud length accepts multiple cable terminals Label recesses for circuit identification Silver alloy contacts provide high reliability for switching live loads Auto Releasing ML-Series Remote Battery Switch with SPST Switching Provides 500A switching and features of current ML Remote Battery Switches, but can be controlled with SPST or SPDT switch for applications where a normally open relay is desired Specifications Control Circuit Connection:Tinned Wire Nominal Voltage:12V DC Coil Function: Auto releasing Mounting: #10 Amperage Operating Current:8mA when OFF/13mA when ON Amperage Operating Current when changing state: <7A (40 ms) Control Circuit Voltage: 10.1 to 16.5V DC Continuous Rating: 500A Intermittent Rating: 700A (5 min) Cranking Rating: 10 sec 2500A Cranking Rating: 1 min 1100A Minimum Operating Temperature: -10° C Maximum Operating Temperature: 50° C Cable Size to Meet Ratings: 2x (4/0) Live Current Switching: 300A @ 12V DC 10,000 Cycles Master Control Switch Capability: Yes Mechanical Endurance: 100,000 Cycles Switching Cycles: 100,000 Terminal Ring Diameter Clearance: 1.18" (29.97mm) Terminal Stud Length: 0.875" (22.23mm) Terminal Stud Size: 3/8-16 (M10) Terminal Stud Torque: 140 in-lb (15.82 Nm) Weight: 1.75lb (0.79 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ML-RBS Remote Battery Switch with Manual Control Auto-Release - 24V Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing LED output to remotely indicate switch state - requires optional LED 3/ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance 7/ 8" (22mm) stud length accepts multiple cable terminals Label recesses for circuit identification Silver alloy contacts provide high reliability for switching live loads Auto Releasing ML-Series Remote Battery Switch with SPST Switching Provides 500A switching and features of current ML Remote Battery Switches, but can be controlled with SPST or SPDT switch for applications where a normally open relay is desired Specifications Control Circuit Connection:Tinned Wire Nominal Voltage:24V DC Manual Control: Yes Coil Function: Auto releasing Mounting: #10 Amperage Operating Current:8mA when OFF/13mA when ON Amperage Operating Current when changing state: <4A (40 ms) Control Circuit Voltage: 20.2 to 32.9V DC Continuous Rating: 500A Intermittent Rating: 700A (5 min) Cranking Rating: 10 sec 2500A Cranking Rating: 1 min 1100A Minimum Operating Temperature: -10° C Maximum Operating Temperature: 50° C Cable Size to Meet Ratings: 2x (4/0) Live Current Switching: 300A @ 12V DC 10,000 Cycles Master Control Switch Capability: Yes Mechanical Endurance: 100,000 Cycles Switching Cycles: 100000 Terminal Ring Diameter Clearance: 1.18" (29.97mm) Terminal Stud Length: 0.875" (22.23mm) Terminal Stud Size: 3/8-16 (M10) Terminal Stud Torque: 140 in-lb (15.82 Nm) Weight: 1.75lb (0.79 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Tinned Lug 4/0 AWG - 5/16" Stud Size - 10 Pack Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables. Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 4/0 AWG Stud Size: 5/16" Length (inch): 2.344" Width (inch): 0.984" Clearance (inch): 0.547" Package Size: Ten included

2101 PowerPost Plus Cable Connector - 1/4" Stud Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit. Features: 150AMP bus allows small wire connections at high amperage cable connections Connects high amperage cables securely Stud dimensions: 1/4" x 1" Base Material is Black Nylon 8231 GHS WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2102 PowerPost Plus Cable Connector - 5/16" Stud Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit. Features: 150 Ampere bus allows small wire connections at high amperage cable connections Connects high amperage cables securely Stud dimensions: 5/16" x 3/4" Base Material is Black Nylon 8231 GHS WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

m-Series Mini On-Off Battery Switch with Key - Black Switches a single battery to a single load group Ignition protected-safe for installation aboard gasoline powered boats. Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts. Switch Type: Single Circuit ON-OFF Color: Black Switch Positions: 2 Battery Combine: No Alternator Field Disconnect: No Maximum Voltage: 48V DC Continuous Rating : 300A Intermittent Rating : 500A (5 min) Cranking Rating 10 sec: 1500A Cranking Rating 1 min: 775A Battery Inputs: 1 Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm) Cable Size to Meet Ratings: 4/0 AWG (120mm²) Mounting Holes: Accept #10 Screw Terminal Stud Size: 3/8"-16 (M10) Terminal Stud Torque: 120 in-lb (13.56 Nm) Weight: 0.62lb (0.28/ kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

m-Series Mini Dual Circuit Battery Switch - Black Simultaneously switches two isolated battery banks. Switch Type: Dual Circuit Color: Black Switch Positions: 2 Battery Combine: No Alternator Field Disconnect: No Maximum Voltage: 32V DC Continuous Rating : 300A Intermittent Rating : 450A (5 min) Cranking Rating 10 sec: 1000A Cranking Rating 1 min: 650A Battery Inputs: 2 Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm) Cable Size to Meet Ratings: 4/0 AWG (120mm²) Mounting Holes: Accept #10 Screw Terminal Stud Size: 3/8"-16 (M10) Terminal Stud Torque: 120 in-lb (13.56 Nm) Weight: 0.80lb (0.36 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

m-Series Mini Dual Circuit Plus Battery Switch - Black Simultaneously switches two isolated battery banks or combines battery banks to all loads. Make before break contact design allows switching between battery banks without power interruption. Switch Type: Dual Circuit Plus Color: Black Switch Positions: 3 Battery Combine: Yes Alternator Field Disconnect: No Maximum Voltage: 32V DC Continuous Rating : 300A Intermittent Rating : 450A (5 min) Cranking Rating 10 sec: 1000A Cranking Rating 1 min: 650A Battery Inputs: 2 Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm) Cable Size to Meet Ratings: 4/0 AWG (120mm²) Mounting Holes: Accept #10 Screw Terminal Stud Size: 3/8"-16 (M10) Terminal Stud Torque: 120 in-lb (13.56 Nm) Weight: 0.80lb (0.36 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2103 PowerPost Plus Cable Connector 3/8" Stud  Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit. Features: 150 Ampere bus allows small wire connections at high amperage cable connections Connects high amperage cables securely Stud dimensions: 3/8" x 3/4" Base Material is Black Nylon 8231 GHS WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.