Ampco Ac216Md14T-S, Viton Pump End Only with Max Impeller

Ampco Pumps AC216MD14T-S Peo 2 X 1 1/2 Kit Ampco's AC Series pumps have standard stainless steel adapters and type D,DG & E seals available. The Ampco AC Series pumps are in conformance with 3A Sanitary Standards for centrifugal and positive rotary pumps for milk and milk products. # 02-10 This Ampco AC Series pumps also have a standard 32RA (150 grit) finish on all product surfaces.

Ampco Pumps C114-DG-BUNA Seal Kit Dg Buna - 114

Ampco Pumps C114-DG-EPDM Seal Kit Dg Epdm - 114

Ampco Pumps C216-DG-EPDM Seal Kit Dg Epdm - 216

Ampco Pumps C114-DG-VITON Seal Kit Dg Viton - 114

Ampco Pumps C216-DG-VITON Seal Kit Dg Viton - 216

Ampco Pumps C114-KIT1-BUNA Seal Kit #1 Buna - 114

Ampco Pumps IC+ 114SJ56C-275 1 1/2X1 1/2Npt Fluid End

Ampco Fluid End Aluminum Bronze Full Size

Ampco Kc2 1 1/2 X 1 1/4 Niaibz Fluid End  

Ampco ICPLUS214-180TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.

Ampco ICPLUS216-250TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.  

Ampco ICPLUS218-280TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.  

BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.   Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.   Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.  Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.    Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.   Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us