|
AMT Pump 1640-165-90 Viton Mech Seal
|
77.35 |
|
|
Amt 1640-161-90 .63 Seal Viton Type 6 Assy
|
20.66 |
|
|
AMT Pump 1640-163-90 1-1/8"Buna-21 Crbn/Cer Seal
|
37.87 |
|
|
AMT Pump 1640-167-90 1-1/8"Vit 31 Sic Carb Sl Kt
|
144.76 |
|
|
AMT Pump 5411-95 Coolant Pump Cast Iron Imm
Cast Iron Immersion Type Coolant Pump
Oil Coolant Pumps
Fluid Port: 1
HP: 1
Impeller Material: Stainless Steel
Phase: 3
1" Cast Iron 1 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
|
933.12 |
|
|
AMT Pump 3152-95 Centrifugal Pump Cast Iron
Heavy Duty Straight Centrifugal Pump
HP: 5
Voltage: 230/460
Phase: 3
Type: Totally Enclosed, Fan Cooled
Motor Frame Size: 184JM
Shaft Seal Material: Buna-N / Stainless Steel
AMT Crossover Model for Flint & Walling C55A503T
|
1437.76 |
|
|
AMT Pump 429F-K8-10F36JT Pump/Motor Assy
|
1594.22 |
|
|
MP Pumps 21366 PUMP FM10 C/I 184TC MT
Flomax 10 Pumpaks are liquid-ends less power source. Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Cast iron construction and will fit 184C/145TC NEMA motors with feet. PumPaks are provided less motors and with 5" maximum impeller diameters.
Specifications
Rated Capacity 140 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal.
Pump water end only less motors.
Motors Required: 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required: 184C/145TC NEMA motors with feet.
|
1631.70 |
|
|
MP Pumps 25979 FM5-CI-56C PUMP
Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 56C NEMA motors less feet.
Specifications
Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI
Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer.
Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" driver shaft; viton mechanical seal.
Pump water end only less motors.
Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz
Motor Frames Required 56C NEMA motors less feet
|
790.20 |
|
|
MP Pumps 26074 Flomax 5 C/I MT 7/8"
Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 184C/145TC NEMA motors with feet.
Specifications
Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI
Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT
Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal.
Pump water end only less motors
Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz
Motor Frames Required 56C NEMA motors less fit or 184C/145TC NEMA motors with feet.
|
810.00 |
|
|
Haight Pump 3U-VMS Pump Viton Mech Seal No Rv
Specifications
Gear Design: Involute Gear
Construction Material: Ductile Iron
Capacity (max): 3 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
Seal: Viton Mechanical Seal
3U - DIU Series Round Hub Positive Displacement Pumps
The Universal Pump Design combines the innovation of our UniverSeal shaft seal, the rugged simplicity of Haight's proven "gear within a gear" internal gear configuration, with the flexibility of a bolt-on, integral Relief Valve assembly. This combination of pump features offers pump users unsurpassed flexibility to adapt their pumps to changing system requirements.
Universal Relief Valve - the relief valve assembly can be added at any time, in the field, with no special tools. The valve can function in either the return to suction mode, or return to tank mode. Available with three different tension springs, the relief valve operates smoothly and effectively over a broad range of setting values.
|
694.43 |
|
|
Tuthill 000LE-A-7 Pump 3/8 Port
Type: Internal Gear
Maximum Flow Rate: 0.5 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 3/8 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, PPS
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
Configuration Assembly: Tang Shaft
|
593.75 |
|
|
Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft
Type: Internal Gear
Maximum Flow Rate: 6.2 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 1/2 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
|
790.80 |
|
|
Tuthill 0LEV-C-A-7 Pump
Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft
Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.
Features :
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
|
611.00 |
|
|
AMT Pump 1640-162-93 Mech Seal
|
35.57 |
|