N2K Micro 4 Way T-Piece The Actisense 4 Way T-Piece is for use where multiple drops or ‘ports’ are required from the NMEA 2000 backbone. It’s as quick and easy to install as a single T-Piece, uses less space than two individual T-pieces, and costs less than four. The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge. Features: NMEA 2000 Approved RoHS Compliant Specifications: Rated Current: 4A Rated Voltage: 60V DC Male Contact: Brass, gold plated Female Contact: Phosphor bronze, gold plated Contact Carrier: PA66 (30% Glass filled), black Contact Polarization: Standard M12 -“A”- polarization Mating Thread: M12 Screw Cap: Brass, nickel plated O-Ring Seal: Rubber, Black Housing: TPU, flame retardant to UL94V-0, Halogen Free Internal Housing Shield: Copper Foil Weight: 105g Protection: IP67 (when mated) Operating Temperature: -20°C to +70°C Storage Temperature: -40°C to +85°C

Micro 4-Way Instrument Drop The Actisense 4-way drop makes it easier to reach up to four devices with a single cable. Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece and individual cable is required for each one. This can either mean excessive cabling demands or moving the backbone closer to your devices. The 4-way drop makes it possible to shorten the length of each cable needed before reaching a T-piece.

A2K-SBN-2 Small Boat 8 Way Self-Contained Boat Network N2K Installing small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense. The equivalent of eight T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are built in which increases the saving on time and space. Once the attached 3 metre cable is connected to the boats power supply, an NMEA 2000 network for up to eight devices is ready to use, taking ‘plug & play’ to the next level. Features: Self-contained NMEA 2000 Network Integrated Termination Resistors 8x NMEA 2000 drops Ruggedized, flame retardant over-moulded housing Metal coupling nuts Integrated EMI Shield Orange, UL Rated, 3M power cable Colour coded wires, stripped and tinned Benefits: Low cost, quick to install, and provides an easy way to connect multiple NMEA 2000 devices Simple installation, fewer components, more reliable, lower cost Accommodates the vast majority of compact NMEA 2000 networks Suitable for wet and harsh conditions- highly desirable in marine environments Reliable, long lasting connections Less likely to be susceptible to interference UL rated cable provide peace of mind. Colour easily differentiates the power cable form drop cables Quick installation, no special tools required

NMEA 2000 T-Connector - 1-Way Extension Block As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use one of these single T-pieces to add devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. The lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed. *Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit). Features: NMEA 2000 Single T-Piece Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating of IP68

NMEA 2000 T-Connector - 6 Ports As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use this 4-way T-piece to add another four additional devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. Also, The 4x lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed. *Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit). Features: NMEA 2000 4 x T-pieces Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating of IP68

Micro Bulk Cable Single Piece - 100M Spool Micro bulk cable is primarily used as drop cable, but it can also be used as the trunk line depending on network power requirements. Bulk cable with field-attachable connectors allows for maximum flexibility as cables can be made on the job to exact lengths. Features: Single Piece 100M Spool Length Trunk of drop cable for use with Micro Connectors Used with field attachable connectors to build exact length cables at the job site

NMEA 2000® Rib Starter Kit An expandable solution for smaller boat users that wish to install an NMEA 2000 network. Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense. The equivalent of four T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are included and as they are removable, the network can be extended if needed. The Micro power cord provides a unique solution to quickly power your network that is easy to install, taking ‘Plug & Play’ to the next level. The NMEA 2000 Starter Kit 3 contains: A2K-MPC-1: NMEA 2000 Micro power cable, 3m UL certified cable A2K-TER-F: NMEA 2000 micro terminator female – to terminate one end of the network A2K-TER-M: NMEA 2000 micro terminator male – to terminate one end of the network A2K-4WT: Multi Drop T

Splash Proof Panel - 4 Way - White Features: Compact panel size Sprayproof inline fuse holders with fuses included Waterproof power receptacles (16A) in five and three way models Waterproof to IP56 Switches rated at 20A DC LxWxH is 3.75'x4.25'x2.9' (95x107x75 mm) Panel supplied with label LBL-WP WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Circuit Breaker Panel - 4-Way BEP Marine uses the highest quality materials in its range of Control Panels, from the marine grade aluminium base plates to the Airpax magnetic hydraulic circuit breakers. Features Marine Grade powder coated aluminium Airpax circuit breaker Stylish Contour Design fascia Green LED backlit labels Red LED indicates systems on Panels meet ABYC standards Specifications Total Positions: 4 Loads Circuit Breakers: 1X 5A, 2X 10A, 1X 15A Nominal Voltage: 12V Maximum Amperage: 80A Dimensions: 4.5" X 5" X 2.5" Neg Bus: 6 Way WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4-Way Nylon Heavy-Duty Ratchet Mount with Cable Slot & Built-In Coax Cable Feed-Thru 1"-14 Thread 4 way ratchet mount in reinforced nylon UV resistant design with handle for deck or bulkhead. Hole for GPS and feed-thru for coax cable. Usable with antennas no longer than 9' in self supporting mode. Standard 1" x 14 thread. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AC Circuit Breaker Panel without Meters, 4 Way Panel 2 Mains - 110V Ideal for AC shore power installations and on board inverter installations. Specifications: Nominal Voltage: 110V AC Total Positions: 4 Loads + 2 Inputs Circuit Breakers (Single + Double Pole): 2x 15A, 2x 20A, + 2x 30A Maximum Aperage: 30A H x W x 2.5": 4.5" x 9.4" Neg Bus: IS-6mm-2 Label Sheet: 5 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AC Circuit Breaker Panel without Meters, 4 Way Panel 2 Mains - 240V Ideal for AC shore power installations and on board inverter installations. Specifications: Nominal Voltage: 240V AC Total Positions: 4 Loads + 2 Inputs Circuit Breakers (Single + Double Pole): 2x 10A, 2x 15A, + 2x 20A Maximum Aperage: 20A H x W x 2.5": 4.5" x 9.4" Neg Bus: IS-6mm-2 Label Sheet: 5 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hypro TT34 3/4 Fnpt T Nylon

NMEA 2000 Starter Cable Kit Nearly every new marine electronics product has an NMEA2000 interface now, but it is still “black magic” to many boat owners and even fairly technical users struggle to understand NMEA2000 and what is needed to make products work correctly together. With Digtial Yacht's large range of AIS, often the first add-on device to make a boat owner think about NMEA2000, we are regularly asked “what do I need to make it work?” This prompted Digital Yacht to create a cost effective and smart NMEA2000 Starter Kit that is ideal for smaller boats but can also be easily expanded in the future. There are other starter kits on the market, but none offer three device connection, metal connectors and a smart 4-Way T-Piece at such a good price. By utilizing the NMEA2000 standard “Micro C” type connectors, users can easily add and expand to this Starter Kit as their installation grows or simply buy two or more kits for a larger install, still cheaper than buying the parts separately. Features: Everything you need in one box Smart 4-Way T-Piece “Backbone” 1M (3') Power Cable with in-line fuse 1M (3') “Drop Cable” Pair of removable network terminators Allows three devices to be connected Standard “Micro C” connectors make it very easy for future network expansion Metal connectors and reduced T-Piece connections, improve reliability

4-Way Block for NMEA 2000 Networks Navico's 4-Way Block accessory for NMEA 2000 Networks should be used where multiple drop-cables are required in close proximity to make a more cost-effective and streamlined solution compared to installations that use multiple T-connectors.