|
Portable 12VDC Air Pump with 3 Tips
Features:
Includes 3 Tip Options
12VDC
Portable Air Pump
Color: Blue
|
13.93 |
|
|
Johnson 10-13406-103 Series 4.0 Aqua Jet Water Pressure System
Johnson Pump 10-13406-103 Aqua Jet 4 GPM Water Pressure Pump. The new generation of WPS pumps - 12V DC. Quiet and pulsation-free even at low speeds, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. WPS 3.5 fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise.
4.0 GPM Aqua Jet Water Pressure System Pump
12 volt DC operation
Smooth and pulsation free flow due to five chamber design
Lower noise and water pulsation characteristics when compared to conventional three or four chamber diaphragm pumps
Designed to use with an accumulator tank
Capacity: 4 GPM
Pressure Cut in: 24 PSI
Pressure Cut off: 41 PSI
Fuse Size: 10 amp
Connection: 3/8 in. NPT/hose 1/2 in. 1/2 in. NPT /hose 3/4 in. 1/2 in.-14NPSM
Motor: 100W
Length: 9.46 in.
Width: 8.42 in.
Height: 4.33 in.
Johnson 10-13406-103 4.0 Aqua Jet Water Pressure System 12V
|
290.95 |
|
|
Aqua Jet Wash Down Pumps
The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.
As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.
Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.
CE-Approved
Features:
Whisper quiet operation
Five-chamber construction
Self-priming
Easy, low cost maintenance
Quick-connect hose or threaded connectors available
Inline strainer and trigger nozzle included as standard
Long service life
Capacity:11 l/min - 2.9 GPM
Pressure Cut Off: 2.8 bar - 41 psi
Fuse Size: 10 A
Connection:3/8" BSP x +" barb / +" NPT x ?" barb
Motor: WD 2.9 - 90 W, 12/24V DC
Body: PA/PPA
Valves: Nitrile
Diaphragm: Santoprene
|
102.00 |
|
|
Aqua Jet Wash Down Pumps
The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.
As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.
Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.
CE-Approved
Features:
Whisper quiet operation
Five-chamber construction
Self-priming
Easy, low cost maintenance
Quick-connect hose or threaded connectors available
Inline strainer and trigger nozzle included as standard
Long service life
Capacity:20 l/min - 5.2 GPM
Pressure Cut Off: 5 bar - 70 psi
Fuse Size: 20 A
Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb,
Motor: WD 5.2 - 185 W, 12/24V DC
Body: PA/PPA
Valves: Nitrile
Diaphragm: Santoprene
|
192.59 |
|
|
Aqua Jet Wash Down Pumps
The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.
As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.
Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.
CE-Approved
Features:
Whisper quiet operation
Five-chamber construction
Self-priming
Easy, low cost maintenance
Quick-connect hose or threaded connectors available
Inline strainer and trigger nozzle included as standard
Long service life
Capacity:13 l/min - 3.5 GPM
Pressure Cut Off: 5 bar - 70 psi
Fuse Size: 15 A
Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb,
Motor: WD 3.5 - 120 W, 12/24V DC
Body: PA/PPA
Valves: Nitrile
Diaphragm: Santoprene
|
162.96 |
|
|
1.1 PSI Air Pump with Hose & Fittings
Features:
Inflates and Deflates
Equipped with 12v cigarette outlet adapter
Comes with several fittings for all applications
Includes special Halkey Roberts adapter to fill party bumpers (M3001) (M3002) (M3030)
*Do NOT use to fill with water or get wet.
**When inflating do not cover the intake hole.
|
32.40 |
|
|
Oberdorfer N992-24C24B-W Gear Pump 24V Painted
FEATURES
Pump Body:
Bronze
Ports:
3/8" NPT
Flow:
5.9 GPM Max
Pressure:
150 PSI Max
Bearings:
Carbon Graphite Bearings, Self-Lubricating
Gears:
Durable bronze helical gears
Shaft Seal:
Buna Lip Seal Standard, Optional Viton Lip Seal.
Shaft:
303 Stainless Steel Shafts
Motor / Drive:
Compact close-coupled design attaches to motors with adaptor brackets. We have many motor options and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer Gear Pump, Bronze, 3/8"NPT Ports, Buna Lip Seal, 1/4HP 2400RPM 24V ODP Motor, Painted White
|
2101.32 |
|
|
Oberdorfer N992-C81-W Pump &Amp; Motor Painted White
FEATURES
Pump Body:
Bronze
Ports:
3/8" NPT
Flow:
5.9 GPM Max
Pressure:
150 PSI Max
Bearings:
Carbon Graphite Bearings, Self-Lubricating
Gears:
Durable bronze helical gears
Shaft Seal:
Buna Lip Seal Standard, Optional Viton Lip Seal.
Shaft:
303 Stainless Steel Shafts
Motor / Drive:
Compact close-coupled design attaches to motors with adaptor brackets. We have many motor options and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer Gear Pump, Bronze, 3/8"NPT Ports, Buna Lip Seal, 12V 1/4HP Motor, Painted White
|
1938.46 |
|
|
MP Pump 29917 Chemflo 3 Pumpak SS: 5.25
MP Pumps Chemflo 3, Stainless Pump Pumpak 4.1" Impeller (Less Motor) 29917
MP Pumps Chemflo 3 Pump Pumpak (Less Motor) # 29917 in 2" X 1-1/2" pipe size. Investment-Cast, 316 Stainless Steel is Stronger than Stamped / Formed 304SS. These pumps include only the PumpPak, they do not include the electric motor. Standard pumps fitted with viton mechanical seals.
Specifications
Rated Capacity: 131 GPM Maximum Head: 105 feet Suction & Discharge Connections: 2" X 1-1/2" FNPT Impeller Diameter: 5.25" impeller diameter. Construction: Investment-Cast, 316 Stainless Steel, enclosed impeller
316 stainless steel shaft; viton mechanical seal. Motor Required: 3 HP Motor Frame Required: 56C Weight: 15 lbs
|
1409.40 |
|
|
Oberdorfer N991-32-C82-W Brz Gear Pump W/12/24V Mtr
|
1896.34 |
|
|
March Mag-Drive Centrifugal Pumps Bronze Center Inlet 12VDC 5.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
479.06 |
|
|
March 809 BRC HS 12VDC Mag-Drive Pump
March Mag-Drive Centrifugal Pumps Bronze 12VDC High Speed 5.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
499.69 |
|
|
Oberdorfer 994-W 994 Gear Pump Painted White
|
270.74 |
|
|
Sherwood G-2903X-J-W Engine Cooling Pump Painted
|
1361.48 |
|
|
Cat Pump 2Sf Pump W/High Temp Seals
|
700.50 |
|