|
Small Boat N2K Network Kit
Installing compact sized NMEA2000® networks is now quicker and easier with the introduction of the Small Boat Network from Actisense. This "backbone in a box" is the equivalent of four T-pieces, two terminators and a power tap, all molded into a single, compact case. This innovative design provides a significant cost, time and space savings compared to traditional NMEA2000® starter kits.
Cables are easily connected/disconnected after mounting thanks to the ambidextrous, molded-in screw locations and the built-in standoff. Once the integral 3 meter power cord is connected to the vessel's power supply, an NMEA2000® network for up to four devices is ready to use, truly taking ‘plug & play’ to the next level. The Small Boat Network can even be expanded, as long as all NMEA2000® installation requirements are properly observed.
|
130.09 |
|
|
A2K-SBN-2 Small Boat 8 Way Self-Contained Boat Network N2K
Installing small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.
The equivalent of eight T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are built in which increases the saving on time and space.
Once the attached 3 metre cable is connected to the boats power supply, an NMEA 2000 network for up to eight devices is ready to use, taking ‘plug & play’ to the next level.
Features:
Self-contained NMEA 2000 Network
Integrated Termination Resistors
8x NMEA 2000 drops
Ruggedized, flame retardant over-moulded housing
Metal coupling nuts
Integrated EMI Shield
Orange, UL Rated, 3M power cable
Colour coded wires, stripped and tinned
Benefits:
Low cost, quick to install, and provides an easy way to connect multiple NMEA 2000 devices
Simple installation, fewer components, more reliable, lower cost
Accommodates the vast majority of compact NMEA 2000 networks
Suitable for wet and harsh conditions- highly desirable in marine environments
Reliable, long lasting connections
Less likely to be susceptible to interference
UL rated cable provide peace of mind. Colour easily differentiates the power cable form drop cables
Quick installation, no special tools required
|
261.83 |
|
|
N2K Starter Kit
NMEA 2000 Network Starter Kit Includes:
Network power cable
4.5M (15') N2K cable
3 x T-connectors
2 x network terminators
|
70.08 |
|
|
SimNet to N2K Adaptor Kit - Connect Simrad heading sensor (FC40, RC42) to
NMEA 2000 network; includes Simnet-to-N2k male adaptor, Simnet-2 Joiner,
T connector.
|
101.94 |
|
|
NMEA 2000® Rib Starter Kit
An expandable solution for smaller boat users that wish to install an NMEA 2000 network.
Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense.
The equivalent of four T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are included and as they are removable, the network can be extended if needed.
The Micro power cord provides a unique solution to quickly power your network that is easy to install, taking ‘Plug & Play’ to the next level.
The NMEA 2000 Starter Kit 3 contains:
A2K-MPC-1: NMEA 2000 Micro power cable, 3m UL certified cable
A2K-TER-F: NMEA 2000 micro terminator female – to terminate one end of the network
A2K-TER-M: NMEA 2000 micro terminator male – to terminate one end of the network
A2K-4WT: Multi Drop T
|
185.09 |
|
|
NAC-2 Autopilot Core Pack - NAC-2, Precision-9, RF25N & N2k Starter Kit
Comprising of the high-current NAC-2 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit ideal for smaller vessels, designed to run small hydraulic drives and mechanical drives for vessels up to 10M (33') in length.
The NAC-2 Autopilot Computer is the brains behind your autopilot system. NAC-2 contains the control algorithms developed to helm a yacht across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-2 was designed for boats up to 10M (33') in length and is suitable for low-current hydraulic drives, mechanical drives, or solenoid valves with a current rating of 8 Amps continuous (12 Amps peak).
Precision-9 Compass
The Precision-9 Compass. Outputs Heading (20 hZ), Rate Of Turn (20 hZ), roll, and pitch (10 hZ) over the NMEA 2000® network.
RF25N NMEA2000
RF25N, Rudder Feedback Unit: With transmission link and 5M (16.5') NMEA2000 Micro-C cable
N2k Backbone Starter Kit
NMEA 2000 Micro-C Network starter kit: Includes Network power cable, 4.5M (15') N2K cable, 3 x T-connectors, 2 x network terminators
Specifications:
Operating temperature: -25°C to +55°C (13°F to 131°F)
Protection: Splashproof, IPx5
Weight: 0.6 kg (1.3 lbs)
Overall Dimensions: Width: 7.1" \ 180mm / Height: 2.2" \ 57mm
Power supply: 9-31.2 V DC
Load: 140 mA + drive unit load
Performance: Drive: 8 A cont., 16A for 1s
Network: 1xMicroC (NMEA2000)
Feedback: Variable voltage/resistive 0-5V
Drive output: To PUMP-1 or HELM-1
Power supply: 9-31.2 V DC
Solenoid: 12/24V DC, common, load range 10mA to 10A, off current <1mA
Clutch: 12/24V DC, min 10mA, max 3A
|
2014.80 |
|
|
Small Boat Kit
Kit Contents:
(6) Clevis Pin Dia. 3/16" GL 17/32"
(6) Clevis Pin Dia. 1/4" GL 1/2"
(4) Clevis Pin Dia. 5/16" GL 11/16"
(10) Cotter pin 3/32" x 3/4 Type 316 Stainless Steel
(10) Circular Pin 3/16" & 1/4" with Starter
(6) Safety Pin 3/16" & 1/4"
|
40.86 |
|
|
NAC-3 Autopilot Core Pack - NAC-3, Precision-9, RF25N & N2k Starter Kit
Comprising of the high-current NAC-3 autopilot computer, Precision-9 compass, RF-25 rudder feedback unit & N2k Starter Kit.
The NAC-3 Autopilot Computer is the brains behind your autopilot system. NAC-3 contains the control algorithms developed to helm a yacht across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-3 was designed for boats 10M (33') or greater in length and is rated to operate high-current hydraulic drives, mechanical drive units, and solenoid valves with a current rating of 30 Amps continuous (50 Amps peak).
Precision-9 Compass
The Precision-9 Compass. Outputs Heading (20 hZ), Rate Of Turn (20 hZ), roll, and pitch (10 hZ) over the NMEA 2000® network.
RF25N NMEA2000
RF25N, Rudder Feedback Unit: With transmission link and 5M (16.5') NMEA2000 Micro-C cable
N2k Backbone Starter Kit
NMEA 2000 Micro-C Network starter kit: Includes Network power cable, 4.5M (15') N2K cable, 3 x T-connectors, 2 x network terminators
Specifications:
Temperature, operation: 0 to +55°C
Temperature, storage: -32 to +70°C
Protection: IPx7
Weight in Kg: 0.7kg, 1.6lbs
Dimmension Max size, mm (length x width x height): 211 x 196 x 65.5mm, 8.31" x 7,72" x 2.58"
Mounting: Bulkhead
Construction: Plastic
Color: Black
Cable inlet: Grommet (Spare Incl)
Local Power supply: 12/24 V DC +10-30%
NMEA 2000 Load Equivalent number (50mA): 1
Reversible motor control of rudder: Max continious load 30A, peak 50A for 1s
On/off solenoid control of rudder: 12/24V DC, common, load range 10mA to 10A, off current <1mA
Engage output for bypass/clutch: 12/24V DC, min 10mA, max 3A
Rudder angle, frequency input: 15V, 1.4 to 5kHz, resol. 20Hz/x OR NMEA2000
NFU port/stbd input and mode indicator output: External open/close contact, common ret, contact current max 30mA
Mode input: External open/close or pulse contact for SYSTEM SELECT, common ret, close to activate, contact current max 30mA
External alarm output for buzzer/relay: Max 100mA, voltage level as local supply
IEC 61162-1 input (NMEA0183 In): 1 ch
IEC 61162-1 output (NMEA0183 Out): 1 ch
IEC 61162-1 speed: 4.8 & 38.4 kbaud
NMEA2000: Certified (pending)
|
2816.35 |
|
|
NAC-2 VRF Core Pack - NAC-2, Precision-9 & N2k Starter Kit
Comprising of the high-current NAC-2 autopilot computer, Precision-9 compass and N2k Starter Kit.
The NAC-2 Autopilot Computer is the brains behind your autopilot system. NAC-2 contains the control algorithms developed to helm a yacht across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-2 was designed for boats up to 10M (33') in length and is suitable for low-current hydraulic drives, mechanical drives, or solenoid valves with a current rating of 8 Amps continuous (12 Amps peak).
Precision-9 Compass
The Precision-9 Compass supplies heading and rate-of-turn information to Simrad, B & G and Lowrance autopilot, radar and navigation systems. Based on reliable solid-state sensor technology, this compact compass offers easy installation aboard any vessel.
N2k Backbone Starter Kit
NMEA 2000 Micro-C Network starter kit: Includes Network power cable, 4.5M (15') N2K cable, 3 x T-connectors, 2 x network terminators.
Features:
Heading, Rate Of Turn (ROT), roll, and pitch output over NMEA 2000®
Heading and ROT calculated using sensor data from 9 axes of rotation and motion
Accurate and reliable solid-state sensor technology
Heading accuracy of ±2° after calibration
Easily adjustable mounting bracket allows bulkhead or up-mast installation
IPX7 waterproof. Best in class.
Simple installation with a single NMEA 2000® connection
Specifications:
Operating temperature: -25°C to +55°C (13°F to 131°F)
Protection: Splashproof, IPx5
Weight: 0.6 kg (1.3 lbs)
Overall Dimensions: Width: 7.1" \ 180mm / Height: 2.2" \ 57mm
Power supply: 9-31.2 V DC
Load: 140 mA + drive unit load
Performance: Drive: 8 A cont., 16A for 1s
Network: 1xMicroC (NMEA2000)
Feedback: Variable voltage/resistive 0-5V
Drive output: To PUMP-1 or HELM-1
Power supply: 9-31.2 V DC
Solenoid: 12/24V DC, common, load range 10mA to 10A, off current <1mA
Clutch: 12/24V DC, min 10mA, max 3A
Precision-9 Specifications:
Dimensions: H: 36mm (1.42"), W & D: 119mm (4.69")
Weight: Module - 165g (5.8oz), Bracket - 130g (4.6oz)
Supply and interface: 8-16 V via NMEA 2000
Power consumption: 0.4 W
NMEA 2000 Load Equivalence No. (LEN): 1
NMEA 2000 ports (input/output): 1
Calibration: Automatic (User Prompted)
Repeatability: ± 1.0° (or better)
Roll/Pitch range: ± 45°
Heading accuracy: ± 2° after calibration
Dynamic performance: with random excitation of ± 10° at max 1 Hz: |Heading error <2°: with heading step input of 90° at a rate of 10°/s: |Heading error 10 sec. after turn <2°
Environmental protection: IPx7
Compass safe distance: 0.5M(1.7')
Temperature range operation: -25 to +65°C (-13 to +149°F)
Temperature range Storage: -30 to +70°C (-22 to +158°F)
|
1654.80 |
|
|
NAC-3 VRF Core Pack - NAC-3, Precision-9 & N2k Starter Kit
Comprising of the high-current NAC-3 Autopilot computer, Precision-9 compass & N2k Starter Kit.
The NAC-3 Autopilot Computer is the brains behind your autopilot system. NAC-3 contains the control algorithms developed to helm a yacht across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-3 was designed for boats 10M(33') or greater in length and is rated to operate high-current hydraulic drives, mechanical drive units, and solenoid valves with a current rating of 30 Amps continuous (50 Amps peak).
Precision-9 Compass
The Precision-9 Compass supplies heading and rate-of-turn information to Simrad, B&G and Lowrance autopilot, radar and navigation systems. Based on reliable solid-state sensor technology, this compact compass offers easy installation aboard any vessel.
N2k Backbone Starter Kit
NMEA 2000 Micro-C Network starter kit: Includes Network power cable, 4.5M (15') N2K cable, 3 x T-connectors, 2 x network terminators
Features:
Heading, Rate Of Turn (ROT), roll, and pitch output over NMEA 2000®
Heading and ROT calculated using sensor data from 9 axes of rotation and motion
Accurate and reliable solid-state sensor technology
Heading accuracy of ±2° after calibration
Easily adjustable mounting bracket allows bulkhead or up-mast installation
IPX7 waterproof. Best in class.
Simple installation with a single NMEA 2000® connection
Specifications:
Temperature, operation: 0 to +55°C
Temperature, storage: -32 to +70°C
Protection: IPx7
Weight in Kg: 0.7kg, 1.6lbs
Dimmension Max size, mm (length x width x height): 211 x 196 x 65.5mm, 8.31" x 7.72" x 2.58"
Mounting: Bulkhead
Construction: Plastic
Color: Black
Cable inlet: Grommet (Spare Incl)
Local power supply: 12/24 V DC +10-30%
NMEA 2000 Load Equivalent number (50mA): 1
Reversible motor control of rudder: Max continious load 30A, peak 50A for 1s
On/off solenoid control of rudder: 12/24V DC, common, load range 10mA to 10A, off current <1mA
Engage output for bypass/clutch: 12/24V DC, min 10mA, max 3A
Rudder angle, frequency input: 15V, 1.4 to 5kHz, resol. 20Hz/° OR NMEA2000
NFU port/stbd input and mode indicator output: External open/close contact, common ret, contact current max 30mA
Mode input: External open/close or pulse contact for SYSTEM SELECT, common ret, close to activate, contact current max 30mA
External alarm output for buzzer/relay: Max 100mA, voltage level as local supply
IEC 61162-1 input (NMEA0183 In): 1 ch
IEC 61162-1 output (NMEA0183 Out): 1 ch
IEC 61162-1 speed: 4.8 & 38.4 kbaud
NMEA2000: Certified (pending)
|
2494.35 |
|
|
MKA-58 Boat Deck Reinforcement Kit
Provides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors.
Features:
Provides additional strength and stability for mounting Minn Kota Quest series trolling motors
Helps to distribute torque loads associated with higher thrust motors
Can be installed directly to the boat deck or in combination with MKA-56 / RTA-55 quick-release bracket
Multiple mounting hole patterns allow for flexible installation
Includes stainless steel hardware
Designed for use in saltwater
Compatible with Ulterra, Terrova, Riptide Terrova, and Riptide Instinct QUEST series trolling motors
|
234.70 |
|
|
Splice Line Small Boat Kit for Boats up to 30'
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.
Specifications:
2 x LS-3600 Toggle Jaw w/ Splice Eye
2 x LS-2900 Tubular Turnbuckle w/ Splice Eye
70' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions
Fid/Needle/Twine
|
349.58 |
|
|
New Boat Owners Essentials Kit
Meguiar's New Boat Owner's Essentials Box includes exactly what you need to get your newer boat looking its best, while making sure it stays that way with lasting protection and high-gloss shine.
Included:
Clean - M5416 Gel Wash:
High sudsing to effectively remove surface contaminants
Will not strip wax protection
Biodegradable detergents(Detergents biodegradable per regulation EC No 648/2004)
Protect - M6316 Flagship Premium Marine Wax:
Dramitically enriches color & shine
Removes light oxidation, fine scratches & swirls
Protects surfaces from UV damage
Maintain - M9424 Flagship Ultimate Detailer
Easily removes dirt, grime & fresh contaminants
Repels water to reduce water spotting
Enhances gloss & protection
Premium Accessories
Supreme Shine Microfiber Towel - The thick, deep dual-sided microfiber pile absorbs two times more than traditional terry towels providing faster wipe off with less strokes. Produces a swirl-free, mirror-like shine.
Hi-Tech Applicator Pad - Ultra soft pad to apply liquid or paste. Safe for any boat's finish. Completely washable and reusable.
|
39.44 |
|
|
New Boat Owners Essentials Kit - *Case of 6*
Meguiar's New Boat Owner's Essentials Box includes exactly what you need to get your newer boat looking its best, while making sure it stays that way with lasting protection and high-gloss shine.
Included:
Clean - M5416 Gel Wash:
High sudsing to effectively remove surface contaminants
Will not strip wax protection
Biodegradable detergents(Detergents biodegradable per regulation EC No 648/2004)
Protect - M6316 Flagship Premium Marine Wax:
Dramitically enriches color & shine
Removes light oxidation, fine scratches & swirls
Protects surfaces from UV damage
Maintain - M9424 Flagship Ultimate Detailer
Easily removes dirt, grime & fresh contaminants
Repels water to reduce water spotting
Enhances gloss & protection
Premium Accessories
Supreme Shine Microfiber Towel - The thick, deep dual-sided microfiber pile absorbs two times more than traditional terry towels providing faster wipe off with less strokes. Produces a swirl-free, mirror-like shine.
Hi-Tech Applicator Pad - Ultra soft pad to apply liquid or paste. Safe for any boat's finish. Completely washable and reusable.
|
223.88 |
|
|
Boat Guide On Kit - 44" - Pair
Features:
Boat guides help you visually guide your boat on your trailer
High-strength super gripper mounting brackets attach firmly above and below the trailer frame
Easy bolt-on mounting fits trailer frames up to 3" x 5" high
Adjustable to provide optimum fit to any hull design
Upright Height 44"
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
146.84 |
|