1-Mile Deck Mount, Red Sidelight - 12V - Stainless Steel Housing Part #: 66319R7 Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility. Features: Red 1-Mile Stainless Steel Housing 112.5 Degree WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1-Mile Deck Mount, Green Sidelight - 12V - Stainless Steel Housing Part #: 66319G7 Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility. Features: 7" Wire Lead 12V Stainless Steel Housing Green WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1-Mile Deck Mount, Bi-Color Red/Green Combo Sidelight - 12V - Stainless Steel Housing Part #: 66318-7 Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Provides 1-mile, 225 degree light visibility. Features: 1-Mile Bi-Color Red/Green Combination 225 Degree Stainless Steel Housing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Mount LED Sidelights - 304 Stainless Steel - Pair Features: 304 S.S. LED Flush Mount Sidelights Length: 7-7/8" Width: 2-1/4" Depth: 2-1/2" Fastener: #10 (4) Side Mount Uses 12Volt 3Watt LED bulb Fully Sealed LED uses less power and has longer life than standard 12V bulbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Smart Cleat 6" Deck Mount Investment Cast 316 Stainless Steel The Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. Constructed of corrosion resistant investment cast 316 stainless steel. Open base mount cleats install with four 1/4" FH fasteners (not included).

Locking Collar Pole Light Mounting Base - 2-Pin - Stainless Steel Features: 2-Pin Plug-In Type Base 5° Rake Construction: Stainless Steel Black Plastic Water Resistant Slide Cover Pigtail Leads Fits: Figs. 1343, 1348, 1400, 1445, 1451, 1455, 1456, 1465 and 1470 Series and All-Round Pole Lights

Locking Collar Pole Light Mounting Base - 2-Pin - Stainless Steel Features: 2-Pin Plug-In Type Base 0° Rake Construction: Stainless Steel Black Plastic Water Resistant Slide Cover Pigtail Leads Fits: Figs. 1343, 1348, 1400, 1440, 1450, 1451, 1452, 1460 and 1470 Series

Flush Mount Cup Holder w/Red LED Light - Stainless Steel LED Illuminated Flush Cup holder with Red light Cut-Out: 3-3/4" O.D.: 4-1/4" Uses 12V battery power Comes with 6" wire leads Includes Thick Mounting Gasket, pad & 3/8" drain tube Fits cams, bottles & can coolers

“ZERO EMI” Recessed 3.5” LED Light - Warm White, Red with Brushed Stainless Steel Bezel - 12VDC “ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen NO EMMISSIONS All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly. Features: Zero AIS & VHF Interference Lower profile design then other halogen and LED offerings. 600 Lumen, 2700K Warm White, >85CRI IP65 Indoor/Outdoor

“ZERO EMI” Recessed 3.5” LED Light - Warm White, Red with White Stainless Steel Bezel - 12VDC “ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen NO EMMISSIONS All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly. Features: Zero AIS & VHF Interference Lower profile design then other halogen and LED offerings. 600 Lumen, 2700K Warm White, >85CRI IP65 Indoor/Outdoor

Deck Foot Switch - Windlass Down - Stainless Steel Lewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box.  Technical Specifications: Switch Direction - Down Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual

Deck Foot Switch - Windlass Up - Stainless Steel Lewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box.  Technical Specifications: Switch Direction - Up Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual

Scallop Pathway Light - Spectrum RGBW - Stainless Steel Housing  With a sleek, low profile design Lumitec’s Scallop Pathway Light is the world’s first ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant.

Scallop Pathway Light - Warm White - Stainless Steel Housing With a sleek, low profile design Lumitec’s Scallop Pathway Light is the world’s first ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant.

Stainless Steel Quick-Release Hose Deck Mount Fitting & Hose Adapter Stainless Steel Deck Mount Fitting, 1/2" NPT Female Inlet, 3/4" GHT Male Hose Adapter. The Quick Release Connector provides the perfect installation solution for your HoseCoil washdown or garden style hose. The Quick Release installs easily on your boat and allows you to stow your hose out of the way. Never trip on a hose again! This clever design will allow you to flush mount the Quick Release into your cockpit or bulkhead. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.