|
1-Mile Deck Mount, Bi-Color Red/Green Combo Sidelight - 12V - Stainless Steel Housing
Part #: 66318-7
Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Provides 1-mile, 225 degree light visibility.
Features:
1-Mile
Bi-Color Red/Green Combination
225 Degree
Stainless Steel Housing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
30.28 |
|
|
1-Mile Deck Mount, Green Sidelight - 12V - Stainless Steel Housing
Part #: 66319G7
Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility.
Features:
7" Wire Lead
12V
Stainless Steel Housing
Green
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.60 |
|
|
1-Mile Deck Mount, Red Sidelight - 12V - Stainless Steel Housing
Part #: 66319R7
Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility.
Features:
Red
1-Mile
Stainless Steel Housing
112.5 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.60 |
|
|
Stealth Series - LED Horizontal Mount Bi-Color Light
Features:
Stainless Steel Cover
Horizontal Mount
Ultra Low Profile
LED Features:
Uses 10% of the Energy Draw of Standard Lights
Low Heat and Long Life
|
100.54 |
|
|
Flush Mount LED Sidelights - 304 Stainless Steel - Pair
Features:
304 S.S. LED Flush Mount Sidelights
Length: 7-7/8"
Width: 2-1/4"
Depth: 2-1/2"
Fastener: #10 (4)
Side Mount Uses 12Volt 3Watt LED bulb
Fully Sealed LED uses less power and has longer life than standard 12V bulbs
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
96.67 |
|
|
Surface Mount Oblong LED Courtesy Lamp - Warm White LED - Stainless Steel Bezel
Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread.
Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes.
Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry.
Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included.
Specifications:
Lens Material: UV and enhanced impact resistant Grilamid
Rim Material: 316 stainless steel
Cable: Pre-wired with 120mm of marine cable
Operating Voltage: Multivolt 12 / 24V DC
Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 35g (including cable)
Approvals: CE
|
27.34 |
|
|
1685-PW Wideband 4G/5G/LTE/WiFi 9dBi with Antenna Deck Mount
Digital Antenna's omni-directional antenna with stainless steel base provides excellent performance from 600-3000 MHz and is ideal for mobile or fixed locations.
9dBi antenna designed and low profile manufactured in the USA by Digital Antenna, greatly improves signal strength providing a maximum signal range.
For Use with any device that connects to the cellular network or WiFi such as routers, modems, amplified signal boosters & gateways. Available in several mounting options for use on boats, buildings, utilities, M2M, and more marine environments.
Features:
Maximum power for 4G, 5G, WiFi signals
9dBi omni-directional gain
Rugged UV stable polyurethane finish
Foam filled to withstand extreme vibrations
316 stainless steel base
Includes Deck Mount
Weatherproof N female connector
5-year warranty
|
245.83 |
|
|
Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back.
Features:
All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
Fits 1-1/2 (inch) fill hose
Designed and tested to prevent water from entering the fuel system
Compatible with Ethanol blended fuels
Stainless Steel finish
EPA / CARB Certified
Dual 1 psi overpressure relief safety valves built into the deck fill caps
Automatic nozzle shutoff 4-18 gpm
|
68.76 |
|
|
Deck Fill for Carbon Canister System - Angled Body & Scalloped Stainless Steel Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back.
Features:
Fits 1-1/2 (inch) fill hose
Compatible with Ethanol blended fuels
Designed and tested to prevent water from entering the fuel system
All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
EPA / CARB Certified
Dual 1 psi overpressure relief safety valves built into the deck fill caps
Automatic nozzle shutoff 4-18 gpm
Deck Fill for Carbon Canister System, angled, stainless steel, single pack
|
68.76 |
|
|
Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.
Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Automatic nozzle shutoff 4-18 gpm
Stainless Steel finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels
|
100.38 |
|
|
Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.
Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
Automatic nozzle shutoff 4-18 gpm
Stainless Steel finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels
|
100.38 |
|
|
Scallop Pathway Light - Spectrum RGBW - Stainless Steel Housing
With a sleek, low profile design Lumitec’s Scallop Pathway Light is the world’s first ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant.
|
137.56 |
|
|
Scallop Pathway Light - Warm White - Stainless Steel Housing
With a sleek, low profile design Lumitec’s Scallop Pathway Light is the world’s first ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant.
|
122.71 |
|
|
Nautilus Piling Light - Spectrum RGBW - Stainless Steel Housing
Small, clean, and versatile, Nautilus is perfect for pilings, posts, pathways, and wall-wash applications. Surface mountable with included adapter for curved for flat mounting locations. Nautilus is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Nautilus light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed into a Kraken dock light system. Completely water sealed and IP67 compliant.
|
137.56 |
|
|
Nautilus Piling Light - Warm White - Stainless Steel Housing
Small, clean, and versatile, Nautilus is perfect for pilings, posts, pathways, and wall-wash applications. Surface mountable with included adapter for curved for flat mounting locations. Nautilus is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Nautilus light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed into a Kraken dock light system. Completely water sealed and IP67 compliant.
|
122.71 |
|