Springlift Black Composite - 10mm Socket - Extended 26.9" - Compressed 15.2" Attwood is partnered with Stabilus®, the world’s leading supplier of gas springs and related products with over 100,000,000 units in the field. All Attwood springs are made with biodegradable, no-hazard water-grade oil (WGK). making them the marine industry’s most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray, and a 30,000-cycle lifecycle test. Attwood springs come with support to ensure the proper spring for a specific application, including marine, industrial, agricultural, pharmaceutical, food processing, and medical.  Specifications: Extended: 26.97 in. Compressed: 15.20 in. Stroke: 11.77 in. End Fitting: 10mm Socket Available Output Force: 30-180 lbs.

RAM Composite 1" Ball Mount with 6.25" X 2" Rectangular Plate & Track Ball™ Base The RAP-B-111B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 6.25" x 2" rectangle plate. The 6.25" x 2" rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The Track Ball™ base can connect to virtually any track system including the RAM Tough-Track™ Overall Height: 6" Ball Size: 1" Rubber "B" Ball Size Material: High Strength Composite Base Marine Grade Aluminum Plate Note: Part number reflects product packaged in a poly bag.

Stainless Gas Spring - 10" - 10mm Socket Popular replacement gas springs for the aftermarket. The pressure tube and rod are made of a stainless steel alloy, while all other exposed components are stainless steel or marine-grade composite.  Features: Offer more durability than competitors' gas springs This gas spring can be used for saltwater use The best spring for livewells, line lockers, deck hatches, and other moisture-prone areas Specifications: Extended Length: 10 in. Compressed Length: 7 in. Stroke: 3  End Fitting Type: 10mm Socket Standard Output Force: 60 lbs.

RAM Composite Double Socket Arm f/1" Ball Bases Part #: RAP-B-201U Standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 3.69" Socket-To-Socket Length: 3" Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Composite Double Socket Swivel Arm The RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at each end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit. Dimensions: Overall Length: 3.69" Socket-To-Socket Length: 3.5"

LightArmor Deck Mount Navigation Light - Black Composite - Port (red) - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Deck Mount Navigation Light - Black Composite - Starboard (green) - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Impeller Removal Tool 1-9/16" to 2-9/16" (40mm - 65mm) Features: Simple to use Fits ALL makes of impeller Avoids damage to pump All Stainless Steel WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Low Profile Composite Double Socket Arm The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.  Features: Material: High Strength Composite Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag Dimensions: Overall Length: 2.75" Socket-To-Socket Length: 2"

BS-1 Stainless Steel Basket - 1.9" x 5.2" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design.

Yamada 640007 O'Ring 9.5mm X 2.0mm B70

BS-2 Stainless Steel Basket - 1.9" x 7.2" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design.

RAM Composite Double Socket Mount Short Arm & with 2/1" Ball Diamond Bases The RAP-B-102U-A consists of a short double socket arm and two 1" ball diamond bases. The diamond bases contain two holes 1.912" from center to center, positioned at both ends. The hole pattern found on the diamond plate will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

A-5 Buoy 27" Diameter - Black The A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions.  Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there.  Put your trust in Polyform's most versatile and well-known product. Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 27" x 36" (68.6 x 91.4cm) Eye Diameter - 1.25" (3.2cm) Circumference - 84.9" (215.5cm) Volume - 47.6 gallons (180.2L) Boat Size - 60' and greater (18.3M) *Sold as an Individual

Description: 304 S.S. Danforth/Fortress Anchor Roller - 26" length. For a 25' - 54' Boat. Dimensions: L: 26" W: 5-1/2"