|
Tuthill 4C2FV-C-A-7 Gear Pump (505000)
Tuthill 4C2FV-C-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.
Shaft Seal:Sleeve Bushing Lip Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1415.76 |
|
|
Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
NO motor
Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
724.80 |
|
|
Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft
Type: Internal Gear
Maximum Flow Rate: 6.2 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 1/2 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
|
792.00 |
|
|
Tuthill 0LEV-C-A-7 Pump
Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft
Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.
Features :
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
|
611.00 |
|
|
Tuthill 2LEV-CC-A-7 Pump Tang Drive
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field)
Counter-clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
792.00 |
|
|
Tuthill 4105V-CC-A-7 Pump Tang Shaft Viton
Cast Iron Rotary Gear Pump
Pump End Only 5.6 GPM
4105 Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field)
COUNTER Clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
|
801.96 |
|
|
Tuthill 1LEV-C-A-88513-7 Pump And Motor
|
1541.22 |
|
|
Tuthill 1LEV-C-A-88520-7 Pump W/3Ph 1/2Hp Motor
|
1657.50 |
|
|
Tuthill 1LEV-C-A-88494-7 Pump And Motor
|
1919.64 |
|
|
Tuthill 1LEV-C-A-88462 Pump 3.2Gpm 1/2Hp 1725Rpm 1P
|
684.25 |
|
|
Micropump GA-V21.C8FS.A Pump Head A Mount
Micropump 81113 GA-V21.C8FS.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81113 constructed of Base Material 316SS, Gear Material Carbon Graphite (Pin Drive) and Shaft Material 316SS
Pump Series: GA Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 177
Max Diff. Pressure (psi): 40
Displacement (ml/rev): 0.042
Design: Standard Design
Gear Set: 0.063/2/48 (0.042ml/rev)
Gear Material: Carbon Graphite (Pin Drive)
Static Seals: PTFE
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: None
Shafts: 316SS
Gear Trim: None
Model: GA-V21.C8FS.A
|
1093.68 |
|
|
Micropump GA-X21.C8FS.A Pump Head A Mount
Micropump 81112 GA-X21.C8FS.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81112 constructed of Base Material 316SS, Gear Material Carbon Graphite (Pin Drive) and Shaft Material 316SS.
Pump Series: GA Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 177
Max Diff. Pressure (psi): 20
Displacement (ml/rev): 0.017
Design: Standard Design
Gear Set: 0.063/2/120 (0.017 ml/rev)
Gear Material: Carbon Graphite (Pin Drive)
Static Seals: PTFE
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: None
Shafts: 316SS
Gear Trim: None
Model: GA-X21.C8FS.A
|
1093.68 |
|
|
Micropump GA-V23.C8FS.A Pump Head A Mount
Micropump 81114 GA-V23.C8FS.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81114 constructed of Base Material 316SS, Gear Material Carbon Graphite (Pin Drive) and Shaft Material 316SS.
Pump Series: GA Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 177
Max Diff. Pressure (psi): 40
Displacement (ml/rev): .08400000000000001
Design: Standard Design
Gear Set: 0.126/2/48 (0.084 ml/rev)
Gear Material: Carbon Graphite (Pin Drive)
Static Seals: PTFE
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: None
Shafts: 316SS
Gear Trim: None
Model: GA-V23.C8FS.A
|
1125.97 |
|
|
Micropump GB-P35.JF5S.A Pump Head A Mount
Micropump L24041 GB-P35.JF5S.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L24041 constructed of Base Material 316SS, Gear Material PEEK (carbon fiber/ptfe) and Shaft Material 316SS.
Pump Series: GB Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -29
Max Temperature (°C): 176.666666666667
Max Diff. Pressure (psi): 57.77777777777777
Displacement (ml/rev): 1.17
Design: Standard Design
Gear Set0.350/3/25 (1.17 ml/rev)
Gear Material: PEEK (carbon fiber/ptfe)
Static Seals: TEV (PTFE encap Viton®)
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: PEEK
Shafts: 316SS
Gear Trim: None
Model: GB-P35.JF5S.A
|
1363.24 |
|
|
Micropump GJ-N21.FF2S.A Pump Head A Mount
Micropump 81511 GJ-N21.FF2S.A
Mag-Drive Gear Pump Head
Requires A-Mount compatible Drive
81511 constructed of Base Material 316SS
Gear Material PTFE
Shaft Material 316SS
18 GPH @ 80 PSI, max based on 100cp at 3450RPM
|
1242.98 |
|