|
Light Bar Security Kit for E-Series, SR-Series, Radiance & Radiance+
This Security Nut Kit from RIGID Industries makes a potential thief's job much more difficult. It includes two (2) 2.25 x 20 spanner nuts, four (4) spacer washers, and one (1) 1/4" hex nut bit. This kit is designed to work with cradle and weld-on mounts.
Security Kit Fits: E-Series, SR-Series, Radiance & Radiance+
Features:
Protection Against Theft
Works with Most Cradle & Weld-on Mounts
Two (2) 2.25 x 20 spanner nuts
Four (4) spacer washers
One (1) 1/4" hex nut bit
One (1) kit required per each Light
Legal Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.
|
25.20 |
|
|
Light Bar Security Kit for D-Series Lights, D-SS & Radiance POD
Stainless steel security hardware kit for the RIGID Dually and D2 LED light families. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.
Features:
Stainless Steel Hardware
Includes: Security Nuts/Bolts & Key
One (1) kit required per Light
Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.
|
38.24 |
|
|
Light Bar Security Kit for SR-M Series & SR-Q Series Lights
Stainless steel security hardware kit for the RIGID SR-M, SR-M2, SR-Q & SR-Q2 LED light families. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.
Features:
Stainless Steel Hardware
Includes: Security Nubs/Bolts and Security Key
One (1) kit required per each Light
Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.
|
31.49 |
|
|
Light Bar Security Kit for Flush Mount Lights
Stainless steel security hardware kit for any of the RIGID Flush-mount LED Lights. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.
Features:
Stainless Steel Construction Hardware
Includes: Security Bolts and Security Keys
One (1) kit required for a pair of lights.
Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.
|
11.64 |
|
|
Adjustable Bar Mount Kit - Pair
The RIGID Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of our light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
Features:
Billet Aluminum Construction
Universal Bar Mount
|
84.74 |
|
|
Adjustable Bar Mount Kit - Pair
The RIGID Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of our light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
Features:
Billet Aluminum Construction
Universal Bar Mount
|
84.74 |
|
|
Adjustable Bar Mount Kit - Pair
The RIGID Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of our light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
Features:
Billet Aluminum Construction
Universal Bar Mount
|
84.74 |
|
|
Adjustable Bar Mount Kit - Pair
The RIGID Industries Adjustable Bar Mount Kit includes two (2) adjustable mounts; one for each end of one of our light bars. These mounts are extremely versatile, allowing for up to 1" of adjustment to position your light exactly where you need it. Made in the USA from light weight black anodized billet aluminum.
Features:
Billet Aluminum Construction
Universal Bar Mount
|
84.74 |
|
|
Horizontal Bar Mount
The RIGID Industries Horizontal Bar Mount includes one mount that allows you to mount any one of our D-Series, SR-M, or SR-Q LED lights to any horizontal tube. (LED Light is NOT included) This mount is made in the USA from light-weight, black anodized billet aluminum
Features:
Billet Aluminum Construction
Universal Bar Mount
|
51.74 |
|
|
Harness Extension 1M f/E/M/SR Series
This Add-a-Light Extension gives you an additional 1 meter of length to allow for more versatility and installation options. It features 16 AWG wire and a Deutsch connector. This harness extension is designed to be used with E-Series or SR-Series light bars that are 20" or longer.
Features:
16 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
33.74 |
|
|
Lighted Rocker Switch
This Switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID Industries lighting system. This switch will fit all RIGID Industries wiring harnesses. This product requires a 3/4" hole to mount.
Features:
Lighted for Better Visibility
Water Resistant
Protective Rubber Boot
Works with All RIGID Industries Wiring Harnesses
|
12.74 |
|
|
Ram Pin-Lock™ Security Kit f/ 1.5" C Size Mounts and Gimbal Brackets
The RAP-S-KNOB5-GU includes Pin-Lock™ security knobs/keys for 1.5" dia. double socket arms and Gimbal brackets. The RAP-S-KNOB5-GU offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB5-GU is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price.
The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM®mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.
|
20.74 |
|
|
Ram Pin-Lock™ Security Kit f/ 1" B Size Mounts and Gimbal Brackets
You make a significant investment in the equipment you purchase to make your job or hobby easier or more enjoyable. Whether it's a high end piece of marine electronics, a GPS for your motorcycle, or a tablet used for business purposes, you need to protect your investment. RAM® Mounts protect your device from harmful shock and vibration, but what about theft and tampering? RAM® offers a full suite of security products which protect your device while mounted on your RAM® mount from theft and unwanted tampering. Simply add a security knob or nut to your RAM Mount to deter would-be thieves from targeting your equipment. RAM® security solutions are also a great way to add tamper resistance to your RAM® Mount in situations where there is a desire to prevent end-users from adjusting the mount or removing the device. High strength composite and brass construction assures a long life of trouble free use in a wide variety of environments including marine and salt water.
|
19.33 |
|
|
Macerator Impeller Kit f/3200 Series - Includes Gasket
For the Following Pumps:
Macerator - 12VDC
Macerator - 12VDC - 180 Degree Port
Macerator - 24VDC
Macerator - 24VDC - 180 Degree Port
|
46.03 |
|
|
2010-2019 RAM 2500/3500 Bumper Mount for 20" & 40" Lightbar - Black
2010-2019 Dodge RAM 2500/3500 Bumper Mount. Fits any one (1) 20" SR-Series, 20" RDS SR-Series, 20" SAE, 20" Midnight SR-Series, 20" E-Series, 20" Radiance, 40" SR-Series, or 40" RDS SR-Series RIGID LED light bar.
Features:
Agrressive RIGID Styling
Stainless Steel Construction
Black Powder Coat Finish
Fits any one (1) 20" SR-Series Pro, 20" RDS SR-Series Pro, 20" SAE SR-Series, 20" E-Series Pro, 20" Radiance Plus, 20" Midnight Edition SR-Series Pro, 40" SR-Series Pro, 40" RDS SR-Series Pro RIGID LED light bar
∗ Lights sold separately
|
102.72 |
|