|
Mast Mount for FLIR Thermal Camera & Raymarine M-Series
Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.
Heavy Duty
Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.
|
422.40 |
|
|
Mast Mount f/KVH TV1
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Units:
Intellian - 12 & i3
KVH - M1DX, M1, TV1, M2, M3, M3DX, M3ST, V3, V3-IP, TV3, V3HTS and V30
Raymarine - 33STV & 37STV
|
436.80 |
|
|
SM-18-A
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Units:
Intellian - i4 & i4P
KVH - M5, FB250(18"), TV5
Raymarine - 45STV
Sea Tel/Cobham - ST14, FX150 (16.5")
VDO - Ocean Line 337
|
489.60 |
|
|
FLIR is excited to announce the launch of the FLIR M-Series Thermal Promotion! For a limited time, save $1,000 on select M-Series stabilized thermal cameras.
Navigate at night like a pro with the enhanced situational awareness and peace of mind a FLIR M-Series camera brings aboard.
Hurry in to your authorized FLIR dealer and add a FLIR M-Series camera to your boat. The M-Series $1,000 rebate runs through July 7th, 2019 and is valid on the following M-Series models: M-324CS, M-625S, M-625CS and M-617CS.
*Offer valid now until July 7th, 2019
Specials Closeouts Remanufactured Rebates
|
|
|
5.5" Thermal Camera Mount for FLIR M300 Series Cameras
Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.
Cable Management
A hollow oval mast section provides plenty of room for cable management.
Space Saving Design
The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.
|
379.20 |
|
|
Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or Larger
Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.
Heavy Duty
Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.
|
489.60 |
|
|
Universal 24" Radar Mast Platform
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Manufacturers:
Furuno
Garmin
JRC
Koden
KVH
Raymarine
Simrad
Sitex
|
388.80 |
|
|
5.25" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base Plate
Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.
Cable Management
A hollow oval mast section provides plenty of room for cable management.
Space-Saving Design
The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.
|
360.00 |
|
|
12" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base Plate
Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.
Cable Management
A hollow oval mast section provides plenty of room for cable management.
Space-Saving Design
The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.
|
427.20 |
|
|
Universal Mast Mount Platform for 12"18" Radome
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Manufacturers:
Furuno
JRC
Koden
Lorenz
Sitex
VDO
|
374.40 |
|
|
Mast Platform for KVH M7/TV6 & Intellian i6/D6
Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.
Adjustable
Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.
Incredible Strength
The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.
Accessories
Pre-drilled under body allows for flood lights or horns to be mounted on certain models.
Compatible Units:
Glomex - 20"-27" satdomes
Intellian - i5, i6, i6P, S6HD, FB500 and v45C
JRC - JUE 500 (24")
KVH - M7, M7SK, FB500(26"), V7, V7-IP, TV6, HD7 and TV3-IP(24")
Oyster - 50MGS, 75MGS, 77MGS and TRX-7MGS
Raymarine - 60STV
Seatel / Cob Ham - C18 & FX250 (24")
Thrane & Thrane - Sailor FB500 & Fleet 55+
VDO - Ocean Line 345, 360, 445 and 460
|
676.80 |
|
|
FLIR is excited to announce the launch of the FLIR M-Series Thermal Promotion! For a limited time, save $1,000 on select M-Series stabilized thermal cameras.
Navigate at night like a pro with the enhanced situational awareness and peace of mind a FLIR M-Series camera brings aboard.
Hurry in to your authorized FLIR dealer and add a FLIR M-Series camera to your boat. The M-Series $1,000 rebate runs through July 7th, 2019 and is valid on the following M-Series models: M-324CS, M-625S, M-625CS and M-617CS.
*Offer valid now until July 7th, 2019
Specials Closeouts Remanufactured Rebates
|
|
|
keywords: Raymarine Thermal Imaging, night vision, se at night, raymarine night vision, marine night vision, thermal camera
|
|
|
5.5" Thermal Camera Mount Aft Leaning for M100 & M200 Series
Get the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority.
Features:
5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras
Elevates electronics for optimum performance and allows for flexibility in installation
Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management
Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation
Compatible Units:
FLIR M132
FLIR M232
Specifications:
Orientation: Aft-leaning
Material: Marine-grade aluminum
Finish: Powder coated white
|
360.00 |
|
|
1.5" Thermal Camera Top Down Riser Mounts Vertical or Upside Down for FLIR MD-Series & Raymarine T-200
Ever wanted to hand your FLIR M-Series or Raymarine T-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a durable weather resistant marine grade polymer.
Unique Design
This unique design allows you to mount your FLIR MD Series or Raymarine T200 upside down.
High Strength
Made from white ABS glass filled plastic. This helps prevent the plastic from cracking in severe conditions. Ribbing is added for increased strength.
|
158.40 |
|