Dock Edge Standard "D" PVC Profile 16ft Roll - White This versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of Marine Grade PVC with UV Inhibitors and Fungicide. Packaged in easy to use rolls for fewer joints. Product Specifications: Part No.: 1190-F Description: "D" Profile, (16 Ft/Roll), White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

PRODOCK Heavy "D" Dock Profile - 3x8' Sections - Beige This exceptionally strong profile is further reinforced by two internal supports. like all DockEdge+ profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and fungus inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching. WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Heavy "D" PRODOCK Profile (3) 8' pieces - 24' White All Dock Egde PRODOCK Profiles have molded-in UV Inhibitors & Fungicides Our PRODOCK Profiles are the ultimate in Heavy-Duty cushioning and offer years of protection for your boat. PRODOCK commercial grade Heavy Duty vinyl profiles have a smooth high-gloss finish and are manufactured with 100% virgin material with UV Inhibitors and Fungicides. PRODOCK Profiles will retain their resilience in all weather conditions and resist discoloration, mildew, salt water, hardening and tearing. Ideal for use in marinas and larger commercial applications WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dock Edge Inflatable Dock Wheel 9" Diameter 9" Smooth rolling wheel offers substantial dock cushioning and feature molded-in valves to adjust the level of firmness. Heavy-duty Hot Dipped galvanized hardware mounts securely to the dock. Guides boats into your slip easily, regardless of wind and current conditions. Product Specifications: Part No.: 95-078-F Description: Dock Wheel, Corner Mount, 9", White

Dock Edge Torpedo Bumper 18" White These large, durable bumpers add an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from the same Quality material as our Dolphin fenders, each weighs a rugged 2.7 lb. and measures 18" tall with a diameter of 5". Place them on dock leg pipes over the mounting brackets to prevent damaging your watercraft from protruding bolts. Product Specifications: Part No.: 91-110-F Description: Torpedo Bumper, 18", PVC, White Weight: 3.5 lbs. Packaging Dimensions: 18 x 6 x 6 inches WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Solar Piling Cap Light Part #: 96-268-F Dock Edge's solar piling cap lights automatically come on at dusk turn off at dawn and provide 360 degrees of illumination for docking your boat or just dock safety at night. The solar piling cap lights are completely waterproof made of durable UV resistant ABS. Features: 360 degree Illumination Automatic On-At-Dusk Flat or Conical Mount Weatherproof Durable UV resistant ABS Wildlife deterrent spike Installs easily in minutes Includes rechargeable AAA, Ni-Cd battery 6 Preinstalled LED Colors! Change colors anytime

Dock Edge Dockguard Economy PVC Profile 10ft. Roll - White The economy Dock Guard co-extruded Profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on Ski and Bass boats. Fabricated from Marine Grade PVC with UV Inhibitors and Fungicides. Product Specifications Part No.: 1135-F Descriptions: Dock Guard Profile, (10 ft/bag), White

Dock Edge Dolphin Dockside Bumper 7" x 16" The ultimate in heavy impact protection Rugged, air filled Heavy-wall molded PVC & integral inflation valve Angled ends to deflect craft Use Straight bumpers in pairs to form inside corners Excellent gunnel protection Industrial Strength with the Standard Quality and Performance of Dolphin Fenders Product Specifications: Part No.: 1060-W-F Description: Dock-Side Dock Bumper, 7" x 16", White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dock Edge Dolphin Dockside Bumper 12 x 12 Corner White The ultimate in heavy impact protection Rugged, air filled Heavy-wall molded PVC & integral inflation valve Angled ends to deflect craft Use Straight bumpers in pairs to form inside corners Excellent gunnel protection Industrial Strength with the Standard Quality and Performance of Dolphin Fenders Product Specifications: Part No.: 1064-W-F Description: Dock-Side Dock Bumper Corner, 12x12, White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

C-Shape DockPro™ Vinyl Dock Edging - 25' Coil Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails. Available in our four most popular profiles and a full range of lengths

Dock Edge DocKushion Premium Foam Profile Part No. 1150-F DocKushion, Large 48" Foam The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded polypropylene core surrounded by U.V. Stabilized integral skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job. Product Specifications: Part No.: 1150-F Description: DocKushion, Large, (1 pc/Pk), 48", Putty, Foam

Dock Edge Inflatable Dock Wheel 12" Diameter 12" Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness. Heavy-duty Hot Dipped galvanized hardware mounts securely to the dock. Guides boats into your slip easily, regardless of wind and current conditions. Integrally molded ribs both top and bottom of these wheels make them valuable dock and boat protection and a formidable guard against impacts. Product Specifications: Part No.: 95-072-F Description: Dock Wheel, Corner Mount, 12", White

Dock Edge Cleatlite Solar Dock Light w/ SS Mooring Cleat 12" These solar lights are mounted on top of a sturdy steel base, housed inside an attractive, Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes. Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries. Product Specifications: Part No.: 96-250-F Description: CleatLite, Solar Dock Light c/w SS Mooring Cleat

Dock Edge Premium Mooring Whip 2pc 8ft. The practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view. Each Whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip. Dock-Side Premium These Premium Whips start with a solid fiberglass rod and are then manufactured in multi-stages with an exclusive cross-wound fiberglass for extra rigidity unobtainable with solid rod alone. This multi-stage manufacturing gives these whips the necessary strength and flex to retain the boats' position. Exclusive "Plug & Socket" design for quick and easy separation and cast aluminum base with built-in cleat, ring and thumb screw. Each whip includes our unique functional roller tip and a tie-off cleat for easier access to your boat. Stainless steel mounting hardware included. Product Specifications: Part No.: 3200-F Description: Mooring Whip, 8', Lines&Hdw, 2500 lb. cap. Weight: 15 lbs. Packaging Dimensions: 95 x 8.5 x 5.25 inches

Dock Edge Premium Mooring Whip 2pc 12ft. The practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view. Each Whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip. Dock-Side Premium These Premium Whips start with a solid fiberglass rod and are then manufactured in multi-stages with an exclusive cross-wound fiberglass for extra rigidity unobtainable with solid rod alone. This multi-stage manufacturing gives these whips the necessary strength and flex to retain the boats' position. Exclusive "Plug & Socket" design for quick and easy separation and cast aluminum base with built-in cleat, ring and thumb screw. Each whip includes our unique functional roller tip and a tie-off cleat for easier access to your boat. Stainless steel mounting hardware included. Product Specifications: Part No.: 3400-F Description: Mooring Whip, 12', Lines&Hdw, 5,000 lb. cap. Weight: 8.8 lbs. Packaging Dimensions: 86.25 x 3.5 x 1.75 inches