Micropump GJ-N21.FF2S.C Pump Head C Mount Micropump 82059 GJJN21.FF2S.C  Mag-Drive Gear Pump Head Requires A-Mount compatible Drive 82059 is constructed of Base Material 316SS Gear Material PTFE Shaft Material 316SS

Micropump GA-V23.C8FS.C Pump Head C Mount Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution Max Flow Rate (mL/min): 672 Flow Rate (mL/rev): 0.084 Min Flow Rate (mL/min): 12.6 Differential Pressure (PSI): 40 Differential Pressure (bar): 2.8 Max Motor RPM (rpm): 8000 Seal Material: PTFE Body Material: 316 SS Gear Material: Carbon graphite Relief Valve: No Run Dry: Under 30 seconds Duty Cycle Continuous: Yes Particulates: No Max Temperature ( F): 350 Min Temperature ( F): -50 Max Temperature ( C): 177 Min Temperature ( C): -46 Max Viscosity (cP): 100 Model Number: GA-V23.C8FS.C Part Number: 82117

Tuthill 0LEV-C-A-7 Pump Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.   Features : Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI. Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.

March 815 PL C Beer Pump March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).   At 60Hz SystemUS                Metric Max Flow8 GPM  30.3 LPM Max Head18.6 FT  5.7 M Power0.04 HP        0.029 KW   At 50Hz USMetric 7.9 GPM30 LPM 13.5 FT4.1 M 0.04 HP0.029 KW   Electrical: 115V 50/60Hz or 230V 50/60Hz Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/2"MPT   Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 250 °F / 121 °C   Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.   The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.

March 809 SS HS C Beer Pump     March Pump's 809-SS-HS-C Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7.5 gallons per minute at 3 feet, and its maximum head is 12.1 Feet (or around 5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.75 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The 809-SS-HS-C Beer Pump motor has a six foot cord, a plug, and a base.  The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.    Unit System 60Hz 50Hz Max Flow 7.5 GPM 26.4 LPM Max Head 12.1 FT 2.5 M Power .04 HP .029 KW Electrical 115V 50/60HZ       Type Centrifugal Mag Drive Inlet 3/4"MPT Outlet 1/2"MPT Wet End Stainless Steel (Front and Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Can handle liquids of 250F Materials are FDA Food Compliant With 6 Foot Cord and Plug Components are UL Recognized American Made      

Tuthill 00LE-A-C-7 Pump 1Gpm Short Shaft Pump Body: Cast Iron Shaft Seal: Mechanical Seal Viton Port Size:Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 00LE-C-7 Pump 1Gpm 1 1/2" Ports Pump Body: Cast Iron Shaft Seal: Mechanical Seal Viton Port Size:Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT. Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 0LE-C-7 Pump 1.8Gpm 1/2 Ports Cast Iron Rotary Gear Pump Pump End Only, NO motor L Series Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field) Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.8 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 00LE-K-C-7 Pump 1Gpm 1/2 Ports Pump Body: Cast Iron Shaft Seal: Mechanical Seal Viton Port Size:Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2C2F-C Pump 9Gpm Direct Mount Cast Iron Rotary Gear Pump Pump End Only 8 GPM C Series Cast Iron Construction Flange mount Clockwise rotation only (from shaft end view) Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT

Tuthill 000LEV-C-7 Pump 0.5Gpm 3/8 Ports Pump Body: Cast Iron  Relief Valve: Relief valve is factory set to 55 PSI with adjustment between 55-120 PSI Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT Product Specs : Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 1LEK-C-7 Pump 3.2Gpm with Outer Bearing Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction NO motor Outboard Ball Bearing on Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction NO motor Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field) Clockwise rotation only (from shaft end view) Tang Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 1LEV-C-7 Pump 3.2 Gpm Cast Iron Rotary Gear Pump Pump End Only Tuthill L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEK-C-7 Pump 6.2Gpm 1/2"Ports Cast Iron Rotary Gear Pump. Pump End Only. L Series Pump  Cast Iron Construction Clockwise rotation only (from shaft end view). Outboard Ball Bearing on Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU