|
Tuthill 0LEV-C-A-7 Pump
Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft
Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.
Features :
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
|
611.00 |
|
|
March 809 SS HS C Beer Pump
March Pump's 809-SS-HS-C Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7.5 gallons per minute at 3 feet, and its maximum head is 12.1 Feet (or around 5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.75 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The 809-SS-HS-C Beer Pump motor has a six foot cord, a plug, and a base. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Unit System 60Hz 50Hz Max Flow
7.5 GPM
26.4 LPM
Max Head
12.1 FT
2.5 M
Power
.04 HP
.029 KW
Electrical
115V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/4"MPT
Outlet
1/2"MPT
Wet End
Stainless Steel (Front and Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Can handle liquids of 250F
Materials are FDA Food Compliant
With 6 Foot Cord and Plug
Components are UL Recognized
American Made
|
466.37 |
|
|
March 815 PL C Beer Pump
March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).
At 60Hz
SystemUS Metric
Max Flow8 GPM 30.3 LPM
Max Head18.6 FT 5.7 M
Power0.04 HP 0.029 KW
At 50Hz
USMetric
7.9 GPM30 LPM
13.5 FT4.1 M
0.04 HP0.029 KW
Electrical: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/2"MPT
Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 250 °F / 121 °C
Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.
The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.
|
332.48 |
|
|
Tuthill 0LE-C-7 Pump 1.8Gpm 1/2 Ports
Cast Iron Rotary Gear Pump
Pump End Only, NO motor
L Series
Cast Iron Construction
Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 1.8 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
702.50 |
|
|
Tuthill 2C2F-C Pump 9Gpm Direct Mount
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM C Series
Cast Iron Construction
Flange mount
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
652.38 |
|
|
Tuthill 1LEK-C-7 Pump 3.2Gpm with Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction NO motor
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
732.36 |
|
|
Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
NO motor
Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
724.80 |
|
|
Tuthill 1LEV-C-7 Pump 3.2 Gpm
Cast Iron Rotary Gear Pump
Pump End Only
Tuthill L Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field).
Clockwise rotation only (from shaft end view)
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
724.80 |
|
|
Tuthill 2LEK-C-7 Pump 6.2Gpm 1/2"Ports
Cast Iron Rotary Gear Pump. Pump End Only.
L Series Pump
Cast Iron Construction
Clockwise rotation only (from shaft end view).
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
728.88 |
|
|
Tuthill 2C2B-C-7 Mechanically Sealed Pump
Tuthill 2C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT.
|
845.58 |
|
|
Tuthill 2C2EN-C-7 Pump 9Gpm W/Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM
C Series Pump
Cast Iron Construction
NO motor
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
830.28 |
|
|
Tuthill 3C2EN-C-7 Pump 18Gpm 1 1/4 W/Outr Brg
Cast Iron Rotary Gear Pump
Pump End Only, 17 GPM
C Series Pump
Cast Iron Construction
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1-1/4 inch NPT
Discharge Port is 1-1/4 inch NPT
|
1359.66 |
|
|
Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports
Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1174.02 |
|
|
Tuthill 4C2EN-C-7 Pump 36Gpm 1 1/2 Ports With
Tuthill 4C2EN-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Ball Bearing on Shaft. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Sleeve Bushing Lip Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1319.88 |
|
|
Tuthill 3C2EN-V-C-7 Pump 18Gpm 1 1/4 Ports
Cast Iron Rotary Gear Pump
Pump End Only 17 GPM
C Series Pump
Cast Iron Construction
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1-1/4 inch NPT
Discharge Port is 1-1/4 inch NPT
|
1359.66 |
|