|
Micropump GJ-N21.FF2S.C Pump Head C Mount
Micropump 82059 GJJN21.FF2S.C
Mag-Drive Gear Pump Head
Requires A-Mount compatible Drive
82059 is constructed of Base Material 316SS
Gear Material PTFE
Shaft Material 316SS
|
1051.96 |
|
|
Micropump GA-V23.C8FS.C Pump Head C Mount
Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution
Max Flow Rate (mL/min): 672
Flow Rate (mL/rev): 0.084
Min Flow Rate (mL/min): 12.6
Differential Pressure (PSI): 40
Differential Pressure (bar): 2.8
Max Motor RPM (rpm): 8000
Seal Material: PTFE
Body Material: 316 SS
Gear Material: Carbon graphite
Relief Valve: No
Run Dry: Under 30 seconds
Duty Cycle Continuous: Yes
Particulates: No
Max Temperature ( F): 350
Min Temperature ( F): -50
Max Temperature ( C): 177
Min Temperature ( C): -46
Max Viscosity (cP): 100
Model Number: GA-V23.C8FS.C
Part Number: 82117
|
1147.03 |
|
|
March 809 SS HS C Beer Pump
March Pump's 809-SS-HS-C Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7.5 gallons per minute at 3 feet, and its maximum head is 12.1 Feet (or around 5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.75 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The 809-SS-HS-C Beer Pump motor has a six foot cord, a plug, and a base. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Unit System 60Hz 50Hz Max Flow
7.5 GPM
26.4 LPM
Max Head
12.1 FT
2.5 M
Power
.04 HP
.029 KW
Electrical
115V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/4"MPT
Outlet
1/2"MPT
Wet End
Stainless Steel (Front and Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Can handle liquids of 250F
Materials are FDA Food Compliant
With 6 Foot Cord and Plug
Components are UL Recognized
American Made
|
466.37 |
|
|
March 815 PL C Beer Pump
March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).
At 60Hz
SystemUS Metric
Max Flow8 GPM 30.3 LPM
Max Head18.6 FT 5.7 M
Power0.04 HP 0.029 KW
At 50Hz
USMetric
7.9 GPM30 LPM
13.5 FT4.1 M
0.04 HP0.029 KW
Electrical: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/2"MPT
Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 250 °F / 121 °C
Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.
The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.
|
332.48 |
|
|
Tuthill 0LE-C-7 Pump 1.8Gpm 1/2 Ports
Cast Iron Rotary Gear Pump
Pump End Only, NO motor
L Series
Cast Iron Construction
Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 1.8 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
702.50 |
|
|
Tuthill 2C2F-C Pump 9Gpm Direct Mount
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM C Series
Cast Iron Construction
Flange mount
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
652.38 |
|
|
Tuthill 1LEK-C-7 Pump 3.2Gpm with Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction NO motor
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
732.36 |
|
|
Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
NO motor
Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
724.80 |
|
|
Tuthill 1LEV-C-7 Pump 3.2 Gpm
Cast Iron Rotary Gear Pump
Pump End Only
Tuthill L Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field).
Clockwise rotation only (from shaft end view)
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
724.80 |
|
|
Tuthill 2LEK-C-7 Pump 6.2Gpm 1/2"Ports
Cast Iron Rotary Gear Pump. Pump End Only.
L Series Pump
Cast Iron Construction
Clockwise rotation only (from shaft end view).
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
728.88 |
|
|
Tuthill 2C2EN-C-7 Pump 9Gpm W/Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM
C Series Pump
Cast Iron Construction
NO motor
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
830.28 |
|
|
Tuthill 3C2EN-C-7 Pump 18Gpm 1 1/4 W/Outr Brg
Cast Iron Rotary Gear Pump
Pump End Only, 17 GPM
C Series Pump
Cast Iron Construction
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1-1/4 inch NPT
Discharge Port is 1-1/4 inch NPT
|
1359.66 |
|
|
Tuthill 4C2EN-C-7 Pump 36Gpm 1 1/2 Ports With
Tuthill 4C2EN-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Ball Bearing on Shaft. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Sleeve Bushing Lip Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1319.88 |
|
|
Tuthill 3C2EN-V-C-7 Pump 18Gpm 1 1/4 Ports
Cast Iron Rotary Gear Pump
Pump End Only 17 GPM
C Series Pump
Cast Iron Construction
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1-1/4 inch NPT
Discharge Port is 1-1/4 inch NPT
|
1359.66 |
|
|
Tuthill 4C2FV-C-A-7 Gear Pump (505000)
Tuthill 4C2FV-C-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.
Shaft Seal:Sleeve Bushing Lip Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1414.74 |
|