|
Power Supply 110AC to 12DC/70A
The PWS1000 Series of power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source.
Analytic Systems’ power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery. An Output Over voltage Crowbar circuit protects any powered devices from excessive voltage in the event of a failure of the unit.
The newly updated single-board PWS1000 is ultra-quiet and features the latest generation of current mode PWM control. Extra features include adjustable output voltage audible and visual indicators for low input voltage, low output voltage, over temperature, overload and output on. Either 110 or 220 VAC input (Field Convertible) is available. The PWS1000 also features a four contact output terminal (two positive and two negative contacts) for easy connection of devices to the supply.
Features:
Power sensitive electronics without interference
Rugged and reliable to ensure years of safe and trouble free operation
Adjustable output voltage
Extremely rugged and well suited for marine and other demanding environments
Ultra-quiet low EMI operation
Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature
Over-temperature shutdown
Current limiting
Short circuit protection
Output overvoltage crowbar
Dry contact output fail relay
Remote control option
Digital Volt/Ammeter option
Custom output voltages available (8V to 55V)
19” Rackmount Available
Parallel output diodes available
Three year parts and labour warranty
|
1182.77 |
|
|
Power Supply 110AC to 24DC/40A
The PWS1000 Series of power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source.
Analytic Systems’ power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery. An Output Over voltage Crowbar circuit protects any powered devices from excessive voltage in the event of a failure of the unit.
The newly updated single-board PWS1000 is ultra-quiet and features the latest generation of current mode PWM control. Extra features include adjustable output voltage audible and visual indicators for low input voltage, low output voltage, over temperature, overload and output on. Either 110 or 220 VAC input (Field Convertible) is available. The PWS1000 also features a four contact output terminal (two positive and two negative contacts) for easy connection of devices to the supply.
Features:
Power sensitive electronics without interference
Rugged and reliable to ensure years of safe and trouble free operation
Adjustable output voltage
Extremely rugged and well suited for marine and other demanding environments
Ultra-quiet low EMI operation
Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature
Over-temperature shutdown
Current limiting
Short circuit protection
Output overvoltage crowbar
Dry contact output fail relay
Remote control option
Digital Volt/Ammeter option
Custom output voltages available (8V to 55V)
19” Rackmount Available
Parallel output diodes available
Three year parts and labour warranty
|
1182.77 |
|
|
2-Bank Battery Isolator, 200A, 40V
Analytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electrical
isolation between the battery banks or between a vehicle and trailer.
Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.
While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.
Features:
Waterproof Expoxy Sealed Construction
Easy Connection
Alternator/Charger post 5/16", Battery Post 1/4"
Most Efficient use of Available Alternator Output
Maximize Battery Performance
Three year parts and labour warranty
|
273.55 |
|
|
200A, 40V 3-Bank Ideal Battery Isolator
Features:
Waterproof Expoxy Sealed Construction
Easy Connection
Most Efficient use of Available Alternator Output
Maximize Battery Performance
Three year parts and labour warranty
Analytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electrical
isolation between the battery banks or between a vehicle and trailer.
Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.
While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.
|
333.58 |
|
|
Single Bank Battery Isolator, 200A, 40V
Analytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electrical
isolation between the battery banks or between a vehicle and trailer.
Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.
While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.
Features:
Waterproof Expoxy Sealed Construction
Easy Connection
Alternator/Charger Post 5/16", Battery Post 1/4"
Most Efficient use of Available Alternator Output
Maximize Battery Performance
Three year parts and labour warranty
|
219.74 |
|
|
ANALYTIC SYSTEMS
Analytic Systems designs and manufactures a complete range of products including Battery Chargers, Voltage Converters, Inverters, Power Supplies and Frequency Converters.
|
|
|
IBC320-12 Battery Charger
The IBC series chargers are fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 265 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power.
Four charging profiles are available with easy front panel selection to handle most types of batteries from traditional Lead Acid, Sealed Lead Acid and even Lithium Ion.
The free to download ‘Power Wizard’ software allows full programming and selection of each of the four profiles from a laptop computer. 300 and 1000 Watt models for 1 or 2 banks of 12, 24, 28, 32, 36 or 48 Volt batteries.
Features:
Digital Signal Processor controlled
Computer programmable
Temperature compensation
Easy connection for one or two battery banks
Universal worldwide AC input
Simple front panel controls
Digital Display of Voltage and Current (lengthens chassis)
High Vibration Rugged Duty
Dry Contact Output Fail Relay
Carrying Handle
Canbus / RS232 / Remote Control port
Five year parts and labour warranty
|
721.27 |
|
|
Raymarine's Super Gear Up Sales Event
Outfit your boat with a complete Raymarine system and enjoy big rebate savings during the Super Gear Up Sales Event! Even a basic system can earn you up to $1100 or more when you purchase a new MFD, Autopilot and Radar. Build your system from scratch, or add components to your current Raymarine system. Either way, you can save big on the technology you need!
Receive a FLIR MasterCard Prepaid Reward Card, via mail-in rebate, when you purchase select Raymarine Electronics during the Super Gear Up Sales Event. The more qualifying gear you purchase, the bigger your reward will be!
• Earn up to $1000 on select gS Series Glass Bridge Multifunction Displays
• Earn up to $400 on select eS Series HybridTouch Multifunction Displays
• Earn up to $400 on select Evolution™ Autopilots
• Earn up to $200 on select Radar scanners
Specials Closeouts Remanufactured Rebates
|
|
|
Waterproof IP66 DC Converter 10A, 12V Out 20-80V In, Ruggedized
The VCH10 Step Down series of Voltage Converters supply up to 10 amps of output current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in rugged environments.
The standard VCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade VCH10MW features separate bayonet style MIL connectors for input and output.
The all surface mount high frequency design offers higher reliability, higher efficiency (more than 92%), more power (up to 544 watts at 48 VDC Out) and minimum size.
The VCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.
The unit has reverse input protection, output current limiting and output over-voltage protection.
Features:
Watertight O-ring sealed and EMC gasketed enclosure
MIL connectors
‘Output ON’ and ‘Overload’ LED indicators
Compact size and easy mounting
Up to 80V input
Heavy duty ruggedization with wide temperature range
Paralleling diodes
Custom output voltages available
Two year warranty (parts and labor)
|
445.75 |
|
|
Waterproof IP66 DC Converter 10A, 24V Out, 30-80V In, Ruggedized
The VCH10 Step Down series of Voltage Converters supply up to 10 amps of output current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in rugged environments.
The standard VCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade VCH10MW features separate bayonet style MIL connectors for input and output.
The all surface mount high frequency design offers higher reliability, higher efficiency (more than 92%), more power (up to 544 watts at 48 VDC Out) and minimum size.
The VCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.
The unit has reverse input protection, output current limiting and output over-voltage protection.
Features:
Watertight O-ring sealed and EMC gasketed enclosure
MIL connectors
‘Output ON’ and ‘Overload’ LED indicators
Compact size and easy mounting
Up to 80V input
Heavy duty ruggedization with wide temperature range
Paralleling diodes
Custom output voltages available
Two year warranty (parts and labor)
|
445.75 |
|
|
Waterproof IP66 DC Battery Charger 10A, 12V Out, 20-80V In, Ruggedized
The BCH10 Step Down series of Battery Chargers supply up to 10 amps of charging current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in automotive, heavy equipment, marine, industrial, rail or alternative energy environments. The output voltage is configured to allow permanent connection to the battery.
The standard BCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade BCH10MW features separate bayonet style MIL connectors for input and output.
The all surface mount high frequency design offers higher reliability, higher efficiency (more than 91%), more power (up to 544 watts at 48 VDC Out) and minimum size.
The BCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.
The unit has reverse input protection, reverse battery connection protection, output over-voltage protection and features spark free connection to the battery. Smart Ideal Diode output circuitry prevents any reverse current flowing from the battery back into the converter.
Features:
Watertight O-ring sealed and EMC gasketed enclosure
‘Output ON’ and “Charging” LED indicators
Up to 80V input
Compact size and easy mounting
Deutsch DT04-4P connector on pigtail or MIL connectors
Heavy duty ruggedization with wide temperature range
Custom output voltages available
Custom connector arrangements
Input and output EMC filters
Two year warranty (parts and labor)
|
470.35 |
|
|
Waterproof IP66 DC Battery Charger 10A, 24V Out, 30-80V In, Ruggedized
The BCH10 Step Down series of Battery Chargers supply up to 10 amps of charging current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in automotive, heavy equipment, marine, industrial, rail or alternative energy environments. The output voltage is configured to allow permanent connection to the battery.
The standard BCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade BCH10MW features separate bayonet style MIL connectors for input and output.
The all surface mount high frequency design offers higher reliability, higher efficiency (more than 91%), more power (up to 544 watts at 48 VDC Out) and minimum size.
The BCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.
The unit has reverse input protection, reverse battery connection protection, output over-voltage protection and features spark free connection to the battery. Smart Ideal Diode output circuitry prevents any reverse current flowing from the battery back into the converter.
Features:
Watertight O-ring sealed and EMC gasketed enclosure
‘Output ON’ and “Charging” LED indicators
Up to 80V input
Compact size and easy mounting
Deutsch DT04-4P connector on pigtail or MIL connectors
Heavy duty ruggedization with wide temperature range
Custom output voltages available
Custom connector arrangements
Input and output EMC filters
Two year warranty (parts and labor)
|
470.35 |
|
|
Waterproof IP66 DC Converter 25/35A 12VDC Out/20-45VDC In
This single board design incorporates state of the art switchmode technology for unmatched efficiency and ultra-quiet operation.
Multiple stages of filtering reduce radiated or conducted noise to very low levels. Extra features include adjustable output voltage, audible and visual indicators for low input voltage, low output voltage, over temperature and overload.
Safety features include reverse input protection, over-temperature shutdown, current limiting, short circuit shutdown, a dry contact alarm relay output and output overvoltage crowbar. Optional features include a remote panel monitoring with On-Off control.
Features:
Ultra-quiet
Power sensitive electronics without interference
Rugged and reliable to ensure years of safe and trouble free operation
Adjustable output voltage
Audible & visual indicators for constant current, low input voltage, low output voltage & over-temperature
Extremely rugged and well suited for marine and other demanding environments
High tolerance for shock and vibration
Ultra-quiet low EMI operation
Current limiting protection
Reverse input protection
Output over-voltage crowbar
Dry contact output fail relay
Remote control option
Wide Temperature operation Available
Parallel output diodes available
Conformal Coating and/or Harsh Environment Ruggedization available
Three year parts and labour warranty
|
599.26 |
|
|
AC Intelligent Pure Sine Wave Inverter 1200W, 20-40V In, 110V Out
Digital Signal Processor controlled high power MosFet technology creates a low voltage Sine-Wave that is fed into a compact toroidal step-up transformer to create a very clean low EMI AC output.
Using the free to download ‘Power Wizard’ software, the user can select output frequency, output voltage, output frequency and low voltage shutdown parameters from any laptop through the standard micro-usb interface.
Safety features include current limiting, short circuit protection, inrush protection (during connection to the DC source), overtemperature de-rating and shutdown and low input voltage warning and shutdown.
An Off-Line UPS options allows external AC to be routed through the inverter for high power UPS function if the external AC fails.
Features:
Programmable Low Voltage Shutdown
Overload Protected
Short Circuit Protected
DSP Controlled
Programmable Frequency
Over Temperature Protected
Hardwire AC Output Connection
Programmable Output Voltage
Three year parts and labour warranty
|
598.80 |
|
|
AC Intelligent Pure Sine Wave Inverter, 2400W, 20-40V In, 110V Out
Digital Signal Processor controlled high power MosFet technology creates a low voltage Sine-Wave that is fed into a compact toroidal step-up transformer to create a very clean low EMI AC output. Using the free to download ‘Power Wizard’ software, the user can select output frequency, output voltage, output frequency and low voltage shutdown parameters from any laptop through the standard micro-usb interface. Safety features include current limiting, short circuit protection, inrush protection (during connection to the DC source), overtemperature de-rating and shutdown and low input voltage warning and shutdown. An Off-Line UPS options allows external AC to be routed through the inverter for high power UPS function if the external AC fails.
Features:
Programmable Low Voltage Shutdown
Overload Protected
Short Circuit Protected
DSP Controlled
Programmable Frequency
Over Temperature Protected
Hardwire AC Output Connection
Programmable Output Voltage
Three year parts and labor warranty
|
2403.71 |
|