Marine Fabric Guard - 16oz 303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics.  Resist water, even when you’re on the water.  303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains.  Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more.  When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels.  Keep all your favorite fabrics crisp and clean for years to come. Features: Fabric protector spray that strengthens and restores lost water repellency for marine fabrics Safe for synthetic and natural fibers in marine environments Protects against both water-based and oil-based stains Does not alter fabric color, feel, flammability or breathability Recommended by leading outdoor fabric manufacturer Made in the U.S.A. *Sold as an Individual  WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Marine Fabric Guard - 16oz *Case of 6* 303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics.  Resist water, even when you’re on the water.  303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains.  Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more.  When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels.  Keep all your favorite fabrics crisp and clean for years to come. Features: Fabric protector spray that strengthens and restores lost water repellency for marine fabrics Safe for synthetic and natural fibers in marine environments Protects against both water-based and oil-based stains Does not alter fabric color, feel, flammability or breathability Recommended by leading outdoor fabric manufacturer Made in the U.S.A. *Sold as a Case Pack WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Marine Fabric Guard - 32oz 303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics.  Resist water, even when you’re on the water.  303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains.  Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more.  When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels.  Keep all your favorite fabrics crisp and clean for years to come. Features: Fabric protector spray that strengthens and restores lost water repellency for marine fabrics Safe for synthetic and natural fibers in marine environments Protects against both water-based and oil-based stains Does not alter fabric color, feel, flammability or breathability Recommended by leading outdoor fabric manufacturer Made in the U.S.A. *Sold as an Individual  WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Marine Fabric Guard - 1 Gallon 303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics.  Resist water, even when you’re on the water.  303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains.  Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more.  When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels.  Keep all your favorite fabrics crisp and clean for years to come. Features: Fabric protector spray that strengthens and restores lost water repellency for marine fabrics Safe for synthetic and natural fibers in marine environments Protects against both water-based and oil-based stains Does not alter fabric color, feel, flammability or breathability Recommended by leading outdoor fabric manufacturer Made in the U.S.A. *Sold as an Individual  WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Marine Fabric Guard - 32oz *Case of 6* 303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics.  Resist water, even when you’re on the water.  303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains.  Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more.  When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels.  Keep all your favorite fabrics crisp and clean for years to come. Features: Fabric protector spray that strengthens and restores lost water repellency for marine fabrics Safe for synthetic and natural fibers in marine environments Protects against both water-based and oil-based stains Does not alter fabric color, feel, flammability or breathability Recommended by leading outdoor fabric manufacturer Made in the U.S.A. *Sold as a Case Pack WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Marine Fabric Guard - 1 Gallon *Case of 4* 303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics.  Resist water, even when you’re on the water.  303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains.  Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more.  When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels.  Keep all your favorite fabrics crisp and clean for years to come. Features: Fabric protector spray that strengthens and restores lost water repellency for marine fabrics Safe for synthetic and natural fibers in marine environments Protects against both water-based and oil-based stains Does not alter fabric color, feel, flammability or breathability Recommended by leading outdoor fabric manufacturer Made in the U.S.A. *Sold as a Case Pack WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Marine Aerospace Protectant - 16oz No other product provides this much protection for your boat and water gear.  Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean.  Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays.  It’s safe for use on outdoor gear and apparel, too. Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates.  Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage.  And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials - vinyl, rubber, fiberglass and more. No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season. Features: Powerful UV blockers prevent fading, cracking and premature aging Ideal for - Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing, helmets, visors, and goggles.  Not for use on unfinished leathers (such as suede), fabrics (canvas), floorings, clear plastics, gauge panels or headlights. Dries to a clear matte finish Restores lost color and luster Easy to use - Simply spray on and wipe dry Safe and effective for vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather Made in the U.S.A. *Sold as an Individual  WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Aerospace Protectant - 16oz *Case of 6* No other product provides this much protection for your boat and water gear.  Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean.  Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays.  It’s safe for use on outdoor gear and apparel, too. Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates.  Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage.  And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials - vinyl, rubber, fiberglass and more. No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season. Features: Powerful UV blockers prevent fading, cracking and premature aging Ideal for - Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing, helmets, visors, and goggles.  Not for use on unfinished leathers (such as suede), fabrics (canvas), floorings, clear plastics, gauge panels or headlights. Dries to a clear matte finish Restores lost color and luster Easy to use - Simply spray on and wipe dry Safe and effective for vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather Made in the U.S.A. *Sold as a Case Pack WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

870 Marine Fiberglass Fleetwax - 16oz Collinite’s award-winning, #1 selling marine product is the product to have for larger fleet applications when saving time and money is a priority, but performance can’t be compromised. Versatile and easy to use, this single-step formula removes film, light oxidation/discoloration, and stains from fiberglass surfaces while leaving behind a radiant, high gloss finish and durable protective coating that shields for months against weathering; UV, salt spray, and more.  Features:  Removes tough stains that a normal wash will not Combine 2 steps in 1 Provides 2-3 months of weather protection  Can be used before the last step waxes Applications: For exterior marine detailing use Average spread/coverage: 500-1,000 sq. ft. For hand, dual action and rotary use Application by hand: Place a nickel-sized amount of product on an applicator pad Rub in well over a section no bigger than a 2×2 ft. Use firm pressure and rub until just before the product starts to dry. Buff off with a microfiber towel to reveal a crisper, darker, and more reflective finish Application by machine: Place 5 small pea size dots onto buffing pad. Do not over saturate pad. Only a small amount of product is needed Place pad on panel and turn on buffer to 5800 opm (orbits per minute). Make 2-3 section passes with firm pressure no larger than a 2×2 ft section. Lower machine speed to 4800 opm and make an additional 2-3 passes with less pressure. Buff until just before product dries and never dry buff Wipe off product residue from panel to reveal a clean, glossy, beautiful finish. *Sold as a individual

GP2080-13 SystemPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² 9 & 2 Instruments for 12" Wide Guard GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.5"H x 19.75"W x 6.5"D Usable Face: 9.5"H x 17"W x 5.5"D Max Cutout: 9.375"H x 17"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP2040-30 SystemPod Pre-Cut for Simrad NSS9 evo/B&G Zeus 9 & 1 Instrument for 12" Wide Guard NavPod GP2040 Series for 12" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.

GP2040-31 SystemPod Pre-Cut for Simrad GO9/B&G Vulcan 9 & 1 Instrument for 12" Wide Guard NavPod GP2040 Series for 12" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.

GP2080-20 SystemPod Pre-Cut for Simrad NSS9 evo2/B&G Zeus2 9 & 2 Instruments for 12" Wide Guard GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Constant Torque Hinge Symmetric Forward Torque 0.9 N-m - Reverse Torque 0.9 N-m - Large Size - Stainless Steel 316 - Polished Southco’s line of Constant Torque Position Control Hinges provide constant resistance throughout the entire range of motion, enabling users to easily position doors, display screens, and other mounted components and hold them securely at any desired angle – fully opened, fully closed, or anywhere in between. Hinges are available in a wide variety of sizes, materials, and torque ranges to satisfy application needs across industries. Specifications: Material: 316 Stainless Steel Finish: Polished Color/Appearance: Polished Forward Torque (Nm): 0.90 Reverse Torque (Nm): 0.90 Access Restriction: No Restriction Torque Type: Symmetric Mounting Style: Screw Mount Installation: Rivet/Screw Series: 400 Series Size Series: Large Size Class: E6/ST - Constant Torque Position Control Hinges

G4 Back Pin 0.9" (23mm) LED Light" G4 utilizes High Power LEDs for more than enough light to read and work by. As with all our replacement bulbs the G4 includes a built in Buck Regulator, which produces little heat, making it the most robust on the market today. Compact size Long Life: Up to 50,000 Hours No Fire Hazard Like Halogens