10" Chartplotter System with Internal GPS & C-MAP 4D Card 10.4” Touch Screen with Heavy Duty Silicone Keypad so operators can choose to use either the Touch Screen or the Keypad to Operate. The unit can also be programmed to switch between Day Time and Night Time Screens by the operator at custom-selected times. It has the unique ability to be set up in either Portrait or Landscape Layouts. The mounting bracket has two different attachment points to accommodate the screen layouts. And with a simple menu command, the screen will rotate 90’ degrees from Portrait to Landscape format depending on the customer's preference. The unit is very quickly flush-mounted with removable trim pieces on the top and bottom edges to allow the unit to be screwed in from the front. Features: 100,000 waypoints (A total of 16 colors and 16 icons are selectable for each point with a name tag (8 alphanumeric characters) 50,000 track points (2 types) 100 routes max capacity (20 WPTs per each Route. Each with name tags) Uses the C-Map 4D Cartography Only Internal GPS antenna and the option for a simple passive GPS antenna if needed 52 Channel GPS Receiver that works with U.S. GNSS, Russian GLONASS, and the European GALILEO GPS Networks. Network Data Connections – NMEA-2000 & NMEA-0183 Technical Specifications: Horizontal Positioning Accuracy - Autonomous 2.5m (CEP 50%) Sensitivity - Acquisition (-148 dBm), Tracking (-165 dBm), Reacquisition (-162 dBm) Nav Update - 1Hz, 5Hz Latitude Limits - Between 85°N to 85°S Map Scale - 0.05nm to 1500nm Display Screen - 10.4-inch Color LCD with LED backlight Resolution - SVGA (800 X 600 pixels) Power Supply - DC 12V-36V(+-10%) 12W Operating Temperature - -15°C+50°C In the Box: Display Unit US C-Map 4D Card Protector Mounting Bracket Bracket Knobs Fuse & Bolt Power Cable Owner's Manual

Cartography C-Map 4D The C-MAP 4D is the latest evolution of electronic charting technology, combining vector chart data with exclusive dynamic raster charts and the ability to view charts in 2D or amazing 3D presentation. With high-resolution satellite imagery and innovative features designed to enhance every cruising, fishing or sailing experience.   Compatible with top chart plotter manufacturers including, Furuno, Humminbird, Raymarine and Standard Horizon. Local and Wide coverage available worldwide, and at a budget that suits your boating needs. Through C-Map 4D you also have,the ability to add future value added data segments and features. C-MAP 4D is also available with lower cost and content options designed specifically for the Raymarine Dragonfly displays.   These items are non returnable and / or subject to a restock fee as per our returns policy.

10" Chartplotter/Sounder Combo with Internal GPS & C-MAP 4D Card 10.4” Touch Screen with Heavy Duty Silicone Keypad so operators can choose to use either the Touch Screen or the Keypad to Operate. The unit can also be programmed to switch between Day Time and Night Time Screens by the operator at custom-selected times. It has the unique ability to be set up in either Portrait or Landscape Layouts. The mounting bracket has two different attachment points to accommodate the screen layouts. And with a simple menu command, the screen will rotate 90’ degrees from Portrait to Landscape format depending on the customer's preference. The unit is very quickly flush-mounted with removable trim pieces on the top and bottom edges to allow the unit to be screwed in from the front. Features: 100,000 waypoints (A total of 16 colors and 16 icons are selectable for each point with a name tag (8 alphanumeric characters) 50,000 track points (2 types) 100 routes max capacity (20 WPTs per each Route. Each with name tags) Uses the C-Map 4D Cartography Only Internal GPS antenna and the option for a simple passive GPS antenna if needed 52 Channel GPS Receiver that works with U.S. GNSS, Russian GLONASS, and the European GALILEO GPS Networks. Network Data Connections – NMEA-2000 & NMEA-0183 Chartplotter Technical Specifications: Horizontal Positioning Accuracy - Autonomous 2.5m (CEP 50%) Sensitivity - Acquisition (-148 dBm), Tracking (-165 dBm), Reacquisition (-162 dBm) Nav Update - 1Hz, 5Hz Latitude Limits - Between 85°N to 85°S Map Scale - 0.05nm to 1500nm Display Screen - 10.4-inch Color LCD with LED backlight Resolution - SVGA (800 X 600 pixels) Power Supply - DC 12V-36V(+-10%) 12W Operating Temperature - -15°C+50°C Fishfinder Technical Specifications: Display Mode - Normal (single/dual-frequency), Bottom-lock, Bottom-zoom, A-scope Frequency - 50 and 200 KHz (single or dual) Output Power - 600W/1.5W Range - 600W : 2.5m 600m / 1.5KW: 2.5m 1500m Image speed - Fixed 8 speeds (4/1, 2/1, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32) and stop Function - Gain (auto/manual), Range (auto/manual), Depth with shift (auto/manual), Pulse length selection, White/Black line, Water temperature, Support speed sensor In the Box: Display Unit US C-Map 4D Card Protector Mounting Bracket Bracket Knobs Fuse & Bolt Power Cable Owner's Manual

                               C-MAP MAX-N+ C-MAP MAX-N+ brings trusted Jeppesen data and advanced charting features to users of compatible Lowrance, Simrad and B&G navigation systems. Whether you're an avid saltwater angler, sailing enthusiast or long-range cruiser, these powerful charts will enhance every moment you spend on the water. With huge coverage areas, up-to-date data and state-of-the-art features, no adventure is out of reach.   Simrad & B&G Now Compatible With C-MAP MAX-N+   C-MAP has released the software for both Simrad and B&G Multifunction Displays that will now make them compatible with MAX-N+ along with other enhancements. The newest releases of software for these MFD's now give your customers owning these models and those planning to purchase one an additional cartography option, and one that is now compatible with the all of the content, features & functions of our flagship C-MAP 4D cartography.   What is C-MAP MAX-N+? C-MAP   MAX-N+ brings all the popular C-MAP 4D features to the Navico family of chartplotters, including: The Detailed Harbor Charts, Dynamic Raster Charts, High-Resolution Satellite Imagery, Custom Shaded Depths, Dynamic Tides & Currents, High-Resolution Bathymetric Data, Sport Fishing Data, Aerial Photos, C-Marina Port Info & Multi-Language Charts.      Closeouts     Rebates     Remanufactured    Specials

  Effective now until June 30th, 2020, you will receive a FREE C-MAP Reveal chart card ($299 value) via online rebate with the purchase of any Simrad NSS evo3 chartplotter. Offer valid now until June 30th, 2020.       Specials    Closeouts    Remanufactured    Rebates  

Cartography | C-Map Max These charts are updated twice annually to provide all the latest detail and information. The C-Map Max is compatible with dozens of chartplotters from top manufacturers.   C-Map Max has extensive coverage of coastal waters, lakes and rivers. C-Map has Local, Wide and MegaWide coverage for all charting needs and budgets. Available on C cards and SD cards   These items are non returnable and / or subject to a restock fee as per our returns policy.

SP-120 System with Rudder Feedback - No Drive Unit  The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Rudder Feedback & 9CI Pump The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Rudder Feedback & Type "S" Mechanical Dash Drive  The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Rudder Feedback & Type "T" Mechanical Dash Drive The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Rudder Feedback & Remote Mechanical Drive - 1994 + Mercury IO/Volvo Gas The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Rudder Feedback & Remote Mechanical Drive - 1983-93 Mercury IO/Volvo Diesel  The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Virtual Feedback - No Drive Unit The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Virtual Feedback & 9CI Pump The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

GP1871F 7" GPS/Chartplotter/Fishfinder 50/200, 600W, 1kW, Single Channel & CHIRP Powerful technology in a compact 7" Chartplotter with a built-in CHIRP Fishfinder! Multi-Touch Interface - Convenient and intuitive slide-out menus The GP-1871F smart interface, inherited from the NavNet TZtouch2, features slide-out menus containing all the tools and data you need to be in total control. Display modes customization Customize your display modes and create the perfect combination to fit your individual needs. Finger Gestures With the Finger Gestures (one or two fingers) you can either zoom-in, zoom-out, double tap to take a screenshot or even jump to a full-screen mode when using Split-screen display mode.  Detailed Chart with C-MAP 4D compatibility By using the incredibly rich C-MAP 4D charts, the GP-1871F/1971F delivers highly precise data that features plenty of useful information, such as relief vectors, tidal streams and marine plans, considerably enhancing your navigational awareness. Autopilot controls Via the CAN bus network interface, The NAVpilot-300 and NAVpilot-711C can be connected to the GP-1871F and GP-1971F and controlled directly from the Chart Plotter.  Unmatched detail with TruEcho CHIRP™ The high level of detail available with TruEcho CHIRP™ technology helps to distinguish fish schools, even when close to the sea bed. Fish can be observed with a very high resolution and are displayed in a distinct boomerang shape. The clear presentation marks individual game fish and bait fish, even when tightly schooled together. ACCU-FISH™ and Bottom Discrimination with RezBoost™ With FURUNO’s RezBoost™ data processing technology, fish schools and echoes are shown with high resolution while you can assess fish size and bottom composition thanks to ACCU-FISH™ and Bottom Discrimination functions. Additionnaly, ACCU-FISH™ icons and colors can be freely customized according to the size and depth of the targeted fish.  DRS4W 1st Watch Wireless Radar The GP-1871F and GP-1971F are connectable to the 1st Watch Wireless Radar (Output Power 4 kW) giving your Chart Plotter a major upgrade in accuracy and safety. Easy screenshot and MicroSD card Tap the display with two fingers to capture a screenshot that will be saved directly to your microSD card. Features: Consistent "all-glass" design and GUI (similar to TZtouch2), with multi touch, slide out menus and edge-swipe gesture controls 7" Wide-aspect, bright (1000 cd), multi touch LCD (800 x 480 Resolution) with anti-fingerprint and anti-reflective coating Built-In 1kW TruEcho CHIRP and Conventional Fish Finder with Accu-Fish, RezBoost and Bottom Discrimination Built-In 72 channel GPS WAAS, EGNOS, MSAS Core and antenna Built-In wireless for use with DRS4W Radar & C-MAP C-Weather downloads Radar overlay capability with DRS4W (optional heading input required) Compatible with C-MAP 4D MicroSD Worldwide Cartographic Database Compatible with Navionics+ and Navionics Platinum with software version 4.0 on the Unit C-MAP C-Weather for Wind, Wave, Weather, Humidity and Temperature Autopilot control when integrated w/NavPilot 711C or NavPilot 300 Certified NMEA2000/NMEA0183 Interface (full NMEA0183 output with SW update) Accepts AIS data in both NMEA0183 & NMEA2000 formats Built-In simulation: Internal demo slideshow and simulation mode This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.