|
MA Series Fire Extinguishing System - 450 Cubic Feet
Fireboy-Xintex clean agent fire extinguisher systems are designed to automatically discharge whenever the protected space's ambient temperature reaches 175 degrees Fahrenheit.
When the Fireboy System discharges, the extinguisher is designed to fully empty the HFC-227ea (Heptafluoropropane) and 3M Novec Clean Agent in less than 10 seconds. No clean-up is required. There is no powdery residue or water left behind. The fire is extinguished by a combination of heat reduction and chemical reactions.
*Diesel-powered craft require installation of an Engine Shutdown System
Features:
Protects engine rooms and machinery spaces
Pre-engineered, total flooding system
The safest way to combat an engine room fire
Automatic discharge at 175°F (79°C) with optional manual release
Utilizes HFC-227ea and 3M Novec clean agents – an effective Halon replacement
No water or powdery residue
Includes locking lever for increased safety when removing or installing cable
Certifications:
U.S.C.G.
EN ISO 9094-1 and 9094-2 standards
ISO RINA
MCA Certified
Factory Mutual
Technical Specifications:
Volume Protected - 450 ft3
Dimensions (Dia. x H) - 7.1" x 19.4" (18 x 49.3 cm)
Agent - HFC-227ea and 3M Novec
Agent Weight - 19.4 lbs (8.8 kg)
System Pressure (@70°F) - 240 psi
In the Box:
Fire extinguisher
Mounting bracket
Helm station panel - 90107
Owners manual
*Sold as an Individual
|
1293.75 |
|
|
Automatic Vertical Fire Extinguisher with Heavy Duty Bracket - 225 Cubic Feet Volume Protected
This fire extinguisher provides clean agent fire suppression and is meant to be mounted vertically with the heavy-duty bracket.
Features:
Discharge is automatic at 175 degrees F (79 degrees C) for round-the-clock engine compartment fire protection
Total flooding of the engine compartment in less than 10 seconds for fast smothering of the fire
FK-5-1-12 clean extinguishing agent leaves no harmful residue to clean up
Easy to read color coded pressure gauge on the cylinder also identifies the “charged/discharged” status
Coverage from 25 ft3 to 1,800 ft3 in a broad array of increments provides maximum coverage at the lowest cost
Integrated shelf bracket mounting system
Up to 4,000 ft3 available with GA FK-5-1-12 Systems
Rugged industrial-designed pressure gauge ensures trouble-free performance
International system approvals (FM, USCG, CE, RINA, BV)
FK-5-1-12 clean extinguishing agent is approved for marine use worldwide (EPA SNAP, European)
Approved for Class B fires in engine compartments, machinery spaces, and similar industrial applications
Many marine insurance providers offer a discount to boaters who install a fixed fire extinguisher system (contact your insurer for details)
CG Series:
Automatic discharge only (@ 175 degrees F / 79 degrees C)
Engine compartments up to 1,000 ft3 (28.3 m3)
Heavy-duty mounting bracket
Helm display
Specifications:
Volume Protected: 225ft3 / 6.4 m3
Diameter: 6.3 in. / 160mm
Total Height: 18.7 in. / 476mm
Agent Weight: 12.1 lbs. / 5.5 kgs
Shipping Weight: 32 lbs. / 14.3 kgs
System Pressure: 360 psi @70 degrees F
|
982.50 |
|
|
Automatic Vertical Fire Extinguisher with Heavy Duty Bracket - 175 Cubic Feet Volume Protected
This fire extinguisher provides clean agent fire suppression and is meant to be mounted vertically with the heavy-duty bracket.
Features:
Discharge is automatic at 175 degrees F (79 degrees C) for round-the-clock engine compartment fire protection
Total flooding of the engine compartment in less than 10 seconds for fast smothering of the fire
FK-5-1-12 clean extinguishing agent leaves no harmful residue to clean up
Easy to read color coded pressure gauge on the cylinder also identifies the “charged/discharged” status
Coverage from 25 ft3 to 1,800 ft3 in a broad array of increments provides maximum coverage at the lowest cost
Integrated shelf bracket mounting system
Up to 4,000 ft3 available with GA FK-5-1-12 Systems
Rugged industrial-designed pressure gauge ensures trouble-free performance
International system approvals (FM, USCG, CE, RINA, BV)
FK-5-1-12 clean extinguishing agent is approved for marine use worldwide (EPA SNAP, European)
Approved for Class B fires in engine compartments, machinery spaces, and similar industrial applications
Many marine insurance providers offer a discount to boaters who install a fixed fire extinguisher system (contact your insurer for details)
CG Series:
Automatic discharge only (@ 175 degrees F / 79 degrees C)
Engine compartments up to 1,000 ft3 (28.3 m3)
Heavy-duty mounting bracket
Helm display
Specifications:
Volume Protected: 175ft3 / 4.9 m3
Diameter: 6.3 in. / 160mm
Total Height: 18.7 in. / 476mm
Agent Weight: 9.4 lbs. / 4.3 kgs
Shipping Weight: 26 lbs. / 11.9 kgs
System Pressure: 360 psi @70 degrees F
|
825.00 |
|
|
MU Series Horizontal Clean Agent Fire Extinguisher - 225 Cubic Feet
As an enhancement to Fireboy's product line, the company has added this manual/automatic extinguisher designed specifically for horizontal mounting.
This unit uses the FK-5-1-12 clean extinguishing agent and is designed for maximum firefighting efficiency when mounted in the horizontal position.
Why Fireboy-Xintex is Needed:
Continuous protection
Automatic operation
Manual operation with pull cable
Peace of mind
Often detects and suppresses a fire before it is known
International system approvals (FM, USCG, CE, RINA, BV)
FK-5-1-12 Clean Extinguishing Agent approved for marine use worldwide (EPA SNAP and European)
Approved for Class B fires in engine rooms, machinery spaces, and similar industrial applications
Applications:
Fire protection fluid with very low global warming potential (GWP <1)
Low toxicity in a properly designed system (no harm to personnel)
No damage to sensitive equipment
Not targeted for emission reduction or phase-out
Coverage from 25-485 ft3 (0.7-13.7 m3) for engine rooms, machinery spaces, and other enclosed spaces for Class B fires
Factory Mutual and USCG Approved
Don't Just Manage a Fire. Extinguish it.
FK-5-1-12 clean extinguishing agent is a highly effective clean fire suppressant designed to extinguish a fire in its incipient stage before it has a chance to spread.
The FK-5-1-12 clean extinguishing agent evaporates more than 50 times faster than water. Transitions from a liquid to a gaseous state very rapidly when discharged through a nozzle and readily achieves vapor-extinguishing concentrations in the air.
Low toxicity (no harm to personnel)
Extinguishes fires in less than half the time of CO2 and other inert gases
No damage to sensitive equipment
Not targeted for emission reduction or phase-out
Ready to Install
Each Fireboy system includes a heavy-duty powder-coated steel shelf bracket system, helm display, and owner’s manual.
Specifications:
Volume Protected: 225 ft.^3 (6.4 m^3)
Diameter: 6.3 in. (160 mm)
Agent Weight: 12.7 lbs. (5.8 kgs)
Shipping Weight: 17.2 lbs. (8 kgs)
System Pressure: 360 psi @70 degrees F
|
1042.50 |
|
|
The US Coast Guard issued a safety alert advising of a potential problem involving certain ANSUL – High Pressure Carbon Dioxide Fire Extinguishing Systems. There have been several instances where this system has discharged without human intervention. The manufacturer has identified the suspect CO2 cylinder valves as those having a date code between 10-07 and 06- 08. Owners, operators, and masters of ships having such ANSUL systems should immediately check the dates on the CO2 cylinder valves and notify ANSUL if the date code is within the suspect range. Safety Alert 05-09
|
|
|
System Ready Panel Warning Light
The green warning L.E.D. provides constant monitoring of the fire suppression system when the ignition switch is On. Complies with U.S. Coast Guard requirements for system approval.
This 2" round indicator light has an adhesive back aluminum plate for easy panel mounting and requires a 5/16" hole for wire routing.
Standard with all pre-engineered fire extinguishing systems.
Compatible With:
MA2, CG2 and GA suppression systems
*Sold as an Individual
|
18.00 |
|
|
Fireboy - Xintex
Fireboy-Xintex manufactures top-of-the-line safety devices to keep your boating experience safe. Our equipment detects fires and fatal fumes to protect your marine craft and your life. Fireboy is the world's leading manufacturer of engine compartment fire extinguishing systems.
|
|
|
Manual Discharge Cable Kit - 16'
Designed for manual activation of the MA and GA Series of fire suppression systems. The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation.
Compatible With:
MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems
Features:
Easily routed with engine cables and electrical wiring
Various lengths for vessel specific installation
In the Box:
Cable - 16'
Mounting plate
Pull handle
Safety pin
*Sold as an Individual
|
117.00 |
|
|
Manual Discharge Cable Kit - 20'
Designed for manual activation of the MA and GA Series of fire suppression systems. The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation.
Compatible With:
MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems
Features:
Easily routed with engine cables and electrical wiring
Various lengths for vessel specific installation
In the Box:
Cable - 20'
Mounting plate
Pull handle
Safety pin
*Sold as an Individual
|
124.50 |
|
|
Manual Discharge Cable Kit - 30'
Designed for manual activation of the MA and GA Series of fire suppression systems. The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation.
Compatible With:
MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems
Features:
Easily routed with engine cables and electrical wiring
Various lengths for vessel specific installation
In the Box:
Cable - 30'
Mounting plate
Pull handle
Safety pin
*Sold as an Individual
|
171.00 |
|
|
Manual Discharge Cable Kit - 6'
Designed for manual activation of the MA and GA Series of fire suppression systems. The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation.
Compatible With:
MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems
Features:
Easily routed with engine cables and electrical wiring
Various lengths for vessel specific installation
In the Box:
Cable - 6'
Mounting plate
Pull handle
Safety pin
*Sold as an Individual
|
93.00 |
|
|
Manual Discharge Cable Kit - 10'
Designed for manual activation of the MA and GA Series of fire suppression systems. The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation.
Compatible With:
MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems
Features:
Easily routed with engine cables and electrical wiring
Various lengths for vessel specific installation
In the Box:
Cable - 10'
Mounting plate
Pull handle
Safety pin
*Sold as an Individual
|
106.50 |
|
|
Manual Discharge Cable Kit - 14'
Designed for manual activation of the MA and GA Series of fire suppression systems. The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation.
Compatible With:
MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems
Features:
Easily routed with engine cables and electrical wiring
Various lengths for vessel specific installation
In the Box:
Cable - 14'
Mounting plate
Pull handle
Safety pin
*Sold as an Individual
|
115.50 |
|
|
Manual Discharge Cable Kit - 24'
Designed for manual activation of the MA and GA Series of fire suppression systems. The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation.
Compatible With:
MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems
Features:
Easily routed with engine cables and electrical wiring
Various lengths for vessel specific installation
In the Box:
Cable - 24'
Mounting plate
Pull handle
Safety pin
*Sold as an Individual
|
142.50 |
|
|
Manual Discharge Cable Kit - 28'
Designed for manual activation of the MA and GA Series of fire suppression systems. The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation.
Compatible With:
MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems
Features:
Easily routed with engine cables and electrical wiring
Various lengths for vessel specific installation
In the Box:
Cable - 28'
Mounting plate
Pull handle
Safety pin
*Sold as an Individual
|
157.50 |
|