|
RMK-10 System Remote Control - Portrait & Landscape Keypad
Raymarine's RMK-10 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location.
The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control.
RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displays
The RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere.
RMK-10 Mounting Options
The RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you.
For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.
RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.
Networking & Control
Utilizing Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays.
When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.
|
435.31 |
|
|
RMK-10 System Remote Control Portrait Keypad
Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location.
The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control.
RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displays
The RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere.
Utilising Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays.
When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.
Mounting Options
The RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you.
For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.
RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.
Specifications:
PoE classClass 1
Nominal supply voltage12 / 24 V dc
Operating voltage range10.8V dc to 31.2V dc
Power consumption3.84W
Environmental:
Operating temperature-25ºC to +55ºC (-13ºF to 131ºF)
Storage temperature-30ºC to +70ºC (-22ºF to 158ºF)
Relative humidityMaximum 75%
Waterproof ratingIPX6
Wired Connections:
Network / power1 x RayNet connector | (gS Series - 1000 Mb/s plus PoE) | (aSeries , cSeries, eSeries - 100 Mb/s)
Alternate power1 x power connector
|
415.75 |
|
|
OP50 Wired Remote Control - Portrait Mount
Perfectly designed for mounting in a helm chair arm, between monitors, or in other locations suiting a portrait orientation, the Simrad OP50 Remote Controller provides intuitive keypad and rotary-dial command of up to six NSS evo2 or NSO evo2 multifunction displays.
Features:
Control up to six NSS evo2 or NSO evo2 multifunction displays
High-quality aluminium control dial with built-in cursor functions
Portrait orientation (landscape version also available)
Narrow design perfect for helm chair arm mounting
Dash mount with low 8mm profile
Zero-profile flush mount with optional bracket
Integrated high-decibel speaker for critical alarms
Quickly switch displays with dedicated button and LED indicators
Single NMEA 2000® connection
Manage Multiple Displays
Networked with a single NMEA 2000® connection for both power and control, one OP50 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicator lights clearly show the selected display number, while a dedicated button cycles quickly through the available displays.
Controls Optimized for NSS evo2 and NSO evo2
The OP50 Remote Controller features a keypad specifically designed to operate the latest NSS evo2 and NSO evo2 multifunction displays efficiently and reliably in all conditions. The controller's high-quality aluminium dial features a knurled edge for precise rotary control, and built-in cursor functions for easy on-screen navigation.
Easy Mounting in Vertical or Portrait Orientation
The portrait OP50 is perfectly suited to mounting in the arm of a helm chair, with its narrow design and cable positioned specially to fit such installations. This orientation is also ideal for use in narrow consoles and beside Simrad MO-series touchscreen or pilothouse monitors. Dash mounting provides a slim 8mm profile, while an optional bracket allows total flush-mount installation.
Specifications:
NMEA 2000 Certified: Yes
Operating Temperature: -15°C to +55°C/5°F to 131°F
Waterproof Standard/Rating: IPX6 (from front when dash mounted with gasket) IPX2 (from back)
Product Width: 60mm/2.36"
Product Depth: 44.5mm/1.75"
Product Height: 150mm/5.9"
Product Weight: 0.3kg/0.66lb
Power Consumption: <100mA@13.5V
NMEA 2000 Load Equivalency Number: 2 network loads (100mA)
|
538.80 |
|
|
ZC2 Remote Portrait
Perfectly designed for mounting in a cockpit pedestal, by the chart table or in other locations suiting a ‘portrait’ orientation. The B & G ZC2 Remote Controller provides intuitive keypad and rotary-dial command of up to six Zeus², Zeus³, Glass Helm or Vulcan multifunction displays; and can be used to control a B & G autopilot via any networked display.
Manage Multiple Displays
Networked with a single NMEA 2000® connection for both power and control, one ZC2 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicator lights clearly show the selected display number, while a dedicated button cycles quickly through the available displays. The ZC2 can also be used as an autopilot remote control via any networked display; while the MOB function enables a remote MOB alert to be issued across all networked displays.
Controls Optimised for Zeus², Zeus³, Glass Helm or Vulcan
The ZC2 Remote Controller features a keypad specifically designed to operate the latest Zeus², Zeus³, Glass Helm or Vulcan multifunction displays efficiently and reliably in all conditions. The controller’s high-quality aluminium dial features a knurled edge for precise rotary control, and built-in cursor functions for easy on-screen navigation.
Easy Mounting in Vertical or ‘Portrait’ Orientation
The ‘portrait’ ZC2 is perfectly suited to mounting in the pedestal or chart table, with its narrow design and cable positioned specially to fit such installations. Dash mounting provides a slim 8mm profile, while an optional bracket allows total flush-mount installation.
Features:
Control up to six Zeus², Zeus³, Glass Helm or Vulcan multifunction displays
Autopilot remote control via any networked display
High-quality aluminium control dial with built-in cursor functions
MOB function
Portrait orientation (landscape version also available)
Narrow design perfect for chart table mounting
Dash mount with low 8mm profile
Zero-profile flush mount with optional bracket
Integrated high-decibel speaker for critical alarms
Quickly switch displays with dedicated button and LED indicators
Single NMEA 2000® connection
Specifications:
Waterproof rating: IPX6
Weight: 0.66 lbs
Power consumption min: 0.5 W
Power consumption typical: 0.6 W
NMEA 2000 Connectivity: 1 x NMEA2000 Micro-C port, 2 LEN
Power consumption max: 1.0 W
Supply voltage: 12V DC (10-16V DC)
Operating temperature range: 5 degrees F to 131 degrees F
Warranty period: 2 years
Compass safe: 200mm (0.9')
Recommended fuse rating: 5A
Dimensions WxHxD: 2.4" x 5.9" x 1.8"
Mounting type: flush
Approvals compliance: IEC/EN 60945
Interface: Keypad
Humidity: up to 95% RH
|
526.80 |
|
|
Axiom XL 16 15.6" Multifunction Display
The Axiom XL range is the pinnacle of Raymarine navigation and modern helm integration.
Designed for glass bridge installations, Axiom XL displays offer superior performance, large format visibility and elegant simplicity. Engineered to perform in extreme conditions, the fully waterproof Axiom XL family of glass bridge MFDS can be installed in both open cockpits and enclosed bridge stations. Each model uses in-plane switching technology (IPS) and Raymarine optical bonding to deliver wider viewing angles, sharp contrast, and unmatched readability in bright sun.
Flagship Performance
At the heart of each Axiom XL display is a blazing fast quad core processor that delivers a responsive and powerful all-in-one big screen navigation experience. Axiom XL brings together multiple technologies and sensors into single or multi display helm solution. Integrate Axiom XL with additional Axiom XL displays or connect seamlessly with Raymarine’s family of Axiom and Axiom Pro displays at remote stations.
Superior Integration
A powerful network and video integration platform, Axiom XL displays feature three Ethernet ports for connecting radar, CHIRP and 3D sonar modules, plus additional Axiom family displays. FLIR thermal camera support enhances awareness and HDMI input enables Axiom XL to serve as a remote PC or entertainment display.
Elegant Simplicity
Axiom XL displays are powered by Raymarine’s LightHouse 3 OS and offer a fast, fluid, and uncluttered interface that is easily personalized for your navigation style. Enjoy multi-touch screen control or add the Raymarine RMK-10 keypad for complete remote system.
Features:
Smart and Rugged All-Glass Display is optimized for flush or surface mounting and features sleek buttonless design with swipe-to-power touch control. A built-in ambient light sensor automatically adjusts display brightness based on lighting conditions.
Connect Even More with LightHouse Apps. Expand the power and capabilities of Axiom XL by streaming mobile entertainment apps and connect with leading marine technology partners like Seakeeper, Mazy and Luminshore.
Keep Watch on the crew or engine room with marine video cameras. Connect both analog and video over IP to view 4 simultaneous video streams. Built in recording capability transforms Axiom XL into an onboard DVR.
Access Axiom Everywhere using Axiom XL’s HDMI video output. Monitor Axiom from the big screen below deck or stream Axiom XL to your phone or tablet with Raymarine mobile apps.
Vessel Automation with Raymarine Digital Switching solutions for boat builders. Axiom XL Digital Switching technology offers simple touch screen control of onboard electrical devices.
Get Underway Faster with the intuitive LightHouse 3 OS. Spend seconds, not minutes, plotting your next course. LightHouse 3 is easy to learn and easy to customize.
Elevate Awareness with Quantum 2 CHIRP radar and Doppler target tracking, the easier way to keep a watchful eye on potentially dangerous targets.
An Extra Set of Eyes for safer navigation with FLIR ClearCruise™ thermal object recognition. Let Axiom XL and FLIR be your sixth sense on the water so you can navigate safer, both night and day.
Ready to Fish with the optional RVX1000 remotely mounted 3D CHIRP sonar module. Experience Raymarine CHIRP sonar and award winning RealVision™ 3D on the big the screen.
Bring your computer to the helm. Axiom XL lets captains view and control a remote personal computer using a computer’s HDMI output and USB touch screen control.
Navigate with the Best Charts from Navionics, C-MAP, and Raymarine’s library of LightHouse raster and vector charts from leading map makers.
Stay on Course with advanced Evolution autopilot integration. Plot a waypoint on Axiom XL and let Evolution’s 9-axis intelligent sensor keep you on the perfect course.
|
4839.99 |
|
|
Axiom XL 16 15.6" Multifunction Display Kit with RCR-SD, Alarm & Cable
The Axiom XL range is the pinnacle of Raymarine navigation and modern helm integration.
Designed for glass bridge installations, Axiom XL displays offer superior performance, large format visibility and elegant simplicity. Engineered to perform in extreme conditions, the fully waterproof Axiom XL family of glass bridge MFDS can be installed in both open cockpits and enclosed bridge stations. Each model uses in-plane switching technology (IPS) and Raymarine optical bonding to deliver wider viewing angles, sharp contrast, and unmatched readability in bright sun.
Flagship Performance
At the heart of each Axiom XL display is a blazing fast quad core processor that delivers a responsive and powerful all-in-one big screen navigation experience. Axiom XL brings together multiple technologies and sensors into single or multi display helm solution. Integrate Axiom XL with additional Axiom XL displays or connect seamlessly with Raymarine’s family of Axiom and Axiom Pro displays at remote stations.
Superior Integration
A powerful network and video integration platform, Axiom XL displays feature three Ethernet ports for connecting radar, CHIRP and 3D sonar modules, plus additional Axiom family displays. FLIR thermal camera support enhances awareness and HDMI input enables Axiom XL to serve as a remote PC or entertainment display.
Elegant Simplicity
Axiom XL displays are powered by Raymarine’s LightHouse 3 OS and offer a fast, fluid, and uncluttered interface that is easily personalized for your navigation style. Enjoy multi-touch screen control or add the Raymarine RMK-10 keypad for complete remote system.
Features:
Smart and Rugged All-Glass Display is optimized for flush or surface mounting and features sleek buttonless design with swipe-to-power touch control. A built-in ambient light sensor automatically adjusts display brightness based on lighting conditions.
Connect Even More with LightHouse Apps. Expand the power and capabilities of Axiom XL by streaming mobile entertainment apps and connect with leading marine technology partners like Seakeeper, Mazy and Luminshore.
Keep Watch on the crew or engine room with marine video cameras. Connect both analog and video over IP to view 4 simultaneous video streams. Built in recording capability transforms Axiom XL into an onboard DVR.
Access Axiom Everywhere using Axiom XL’s HDMI video output. Monitor Axiom from the big screen below deck or stream Axiom XL to your phone or tablet with Raymarine mobile apps.
Vessel Automation with Raymarine Digital Switching solutions for boat builders. Axiom XL Digital Switching technology offers simple touch screen control of onboard electrical devices.
Get Underway Faster with the intuitive LightHouse 3 OS. Spend seconds, not minutes, plotting your next course. LightHouse 3 is easy to learn and easy to customize.
Elevate Awareness with Quantum 2 CHIRP radar and Doppler target tracking, the easier way to keep a watchful eye on potentially dangerous targets.
An Extra Set of Eyes for safer navigation with FLIR ClearCruise™ thermal object recognition. Let Axiom XL and FLIR be your sixth sense on the water so you can navigate safer, both night and day.
Ready to Fish with the optional RVX1000 remotely mounted 3D CHIRP sonar module. Experience Raymarine CHIRP sonar and award winning RealVision™ 3D on the big the screen.
Bring your computer to the helm. Axiom XL lets captains view and control a remote personal computer using a computer’s HDMI output and USB touch screen control.
Navigate with the Best Charts from Navionics, C-MAP, and Raymarine’s library of LightHouse raster and vector charts from leading map makers.
Stay on Course with advanced Evolution autopilot integration. Plot a waypoint on Axiom XL and let Evolution’s 9-axis intelligent sensor keep you on the perfect course.
|
5015.99 |
|
|
Axiom XL 24 Glass Bridge Multifunction Display
The Axiom XL range is the pinnacle of Raymarine navigation and modern helm integration.
Designed for glass bridge installations, Axiom XL displays offer superior performance, large format visibility and elegant simplicity. Engineered to perform in extreme conditions, the fully waterproof Axiom XL family of glass bridge MFDS can be installed in both open cockpits and enclosed bridge stations. Each model uses in-plane switching technology (IPS) and Raymarine optical bonding to deliver wider viewing angles, sharp contrast, and unmatched readability in bright sun.
Available in 16, 19, 22 and 24-inch display sizes, Axiom XL’s edge-to-edge glass construction gives vessel designers the ability to create integrated and elegant navigation helm appearance.
Flagship Performance
At the heart of each Axiom XL display is a blazing fast quad core processor that delivers a responsive and powerful all-in-one big screen navigation experience. Axiom XL brings together multiple technologies and sensors into single or multi display helm solution. Integrate Axiom XL with additional Axiom XL displays or connect seamlessly with Raymarine’s family of Axiom and Axiom Pro displays at remote stations.
Elegant Simplicity
Axiom XL displays are powered by Raymarine’s LightHouse 3 OS and offer a fast, fluid, and uncluttered interface that is easily personalized for your navigation style. Enjoy multi-touch screen control or add the Raymarine RMK-10 keypad for complete remote system control.
Superior Integration
A powerful network and video integration platform, Axiom XL displays feature three Ethernet ports for connecting radar, CHIRP and 3D sonar modules, plus additional Axiom family displays. FLIR thermal camera support enhances awareness and HDMI input enables Axiom XL to serve as a remote PC or entertainment display.
Features:
Smart and Rugged All-Glass Display is optimized for flush or surface mounting and features sleek buttonless design with swipe-to-power touch control. A built-in ambient light sensor automatically adjusts display brightness based on lighting conditions.
Connect Even More with LightHouse Apps. Expand the power and capabilities of Axiom XL by streaming mobile entertainment apps and connect with leading marine technology partners like Seakeeper, Mazu and Lumishore.
Keep Watch on the crew or engine room with marine video cameras. Connect both analog and video over IP to view 4 simultaneous video streams. Built in recording capability transforms Axiom XL into an onboard DVR.
Access Axiom Everywhere using Axiom XL’s HDMI video output. Monitor Axiom from the big screen below deck or stream Axiom XL to your phone or tablet with Raymarine mobile apps.
Vessel Automation with Raymarine Digital Switching solutions for boat builders. Axiom XL Digital Switching technology offers simple touch screen control of onboard electrical devices.
Get Underway Faster with the intuitive LightHouse 3 OS. Spend seconds, not minutes, plotting your next course. LightHouse 3 is easy to learn and easy to customize.
Elevate Awareness with Quantum 2 CHIRP radar and Doppler target tracking, the easier way to keep a watchful eye on potentially dangerous targets.
An Extra Set of Eyes for safer navigation with FLIR ClearCruise™ thermal object recognition. Let Axiom XL and FLIR be your sixth sense on the water so you can navigate safer, both night and day.
Ready to Fish with the optional RVX1000 remotely mounted 3D CHIRP sonar module. Experience Raymarine CHIRP sonar and award winning RealVision™ 3D on the big the screen.
Bring your computer to the helm. Axiom XL lets captains view and control a remote personal computer using a computer’s HDMI output and USB touch screen control.
Navigate with the Best Charts from Navionics, C-MAP, and Raymarine’s library of LightHouse raster and vector charts from leading map makers.
Stay on Course with advanced Evolution autopilot integration. Plot a waypoint on Axiom XL and let Evolution’s 9-axis intelligent sensor keep you on the perfect course.
|
15179.99 |
|
|
S100
Wireless SeaTalk autopilot remote control
S100 Wireless Autopilot Remote
Compact and lightweight, the S100 remote delivers the freedom of wireless control to any Raymarine SeaTalk autopilot. The bright display is easy to read with two lines of text and a graphical autopilot mode indicator. The 5 button ergonomic keypad and intuitive menu structure provides simple operation and easy access to extended features. Rugged and waterproof the S100 fits in your pocket or clips to your belt, keeping full function autopilot control always within reach.
S100 Features
Two line display with a graphical autopilot status indicator
Crisp, high contrast 24 x 127 dot matrix display
Backlit display
Raised profile on Standby button for easy identification in the dark
Keylock security
Convenient, replaceable AAA alkaline batteries
No longer comes with Belt clip
Wireless Features:
Up to 32 feet (10 meters) wireless operating range from the base station
Signal strength indicator
Pre-registered each unit leaves the factory already registered to the base station
S100 comes with Instruction Manual, S100 Controller, Base Station, Cradle, Lanyard
The S100 wireless autopilot controller is compatible with the following Raymarine/Autohelm SeaTalk Autopilots:
ST1000
ST2000
ST3000
ST4000
ST5000
SmartPilot ST6001
SmartPilot ST7001
SmartPilot ST8001
SmartPilot S1000
|
497.35 |
|
|
MS-NRX300 Remote Control - Wired NMEA 2000
Features:
Multi-Zone Technology
Install the MS-NRX300 wired remote anywhere onboard the vessel, in the flybridge, cockpit, saloon or cabin for example and gain full localized control of one or up to four individual audio zones.
NMEA 2000 Certified Certified for connection to any NMEA 2000 network making installation straight forward, saving time and money. Once connected, the wired remote will double as a NMEA 2000 repeater displaying supported NMEA data on screen.
Complies With IPx7 Waterproof Standards.
Perfect for installation on a swim platform or deck, the MS-NRX300 wired remote control is designed for the marine environment.
Designed specifically for the marine environment, featuring a 3 year warranty.
Flush & Dash Moutning Options. Innovative design allows an installer the option of either mounting the wired remote with a conventional dash finish or an option to integrate into a glass helm with a flush surface mount.
Superior Optically Bonded LCD Display Large high contrast daylight viewable 2.6" optically bonded LCD will display crystal clear data/track information and prevent moisture build up or fogging.
Specifications:
NMEA 2000 Certified LEN: 3
Large 2.6" Monochrome optically bonded LCDgh contrast daylight viewable in direct sunlight
Adjustable backlit LCD
Dash or Flush mount installation options
Local zone control or all zone control (up to 4 zones)
Complies with IPx7 waterproof standards
STM32 Micro Processor
Rotary encoder
Advanced user interface
'Positive feel' rubber keypad
In the Box:
MS-NRX300 Remote w/attached 1 M Drop Cable
Dust Cover
6 M NMEA 20000 Backbone Cable
NMEA 2000 T-Connector
NMEA 2000 Female Terminator
NMEA 2000 In-line Terminator
Hardware mounting kit
Mounting template
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
193.27 |
|
|
MCU002 Remote Control Unit
The MCU002 is a compact, waterproof remote control unit for use with the TZT9/14/BB. It offers the expandability of multi touch operation of the TZT9/14/BB to the hardware key operation, as the best supplemental tool to multi touch operation. With the MCU002, basic control of the NavNet TZtouch series is always within arms reach.
The MCU002 consists of a simple joystick and 10 dedicated, logical hardware keys, offering control of nearly every aspect of the TZtouch system. The joystick can move in eight directions to move a cursor or scroll the screen. It also has a "push" functionality - for example, if you push the joystick on the Plotter screen, a contextual menu will appear.
The MCU002 also offers control of the NavPilot 700 Autopilot when that system is integrated with NavNet TZtouch.
Features:
Complete control of all TZtouch features and functions
Compactly sized for flexible installation (2.3"w x 4.5"h w/a modest .75" mounting depth)
Combination of clickable joystick controller and tactile response buttons for simplified operation
Auto-Scroll feature enables instant panning/scrolling by placing cursor at edge of screen
USB 2.0 device w/2m cable, extendable w/optional USB 2.0 extension cable (tested up to 30m)
Use w/Multi-touch controls & NavNet apps
TZtouch v3.12 or later software required to support MCU002 functionality
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
192.00 |
|
|
i-Pilot System Remote Access w/Bluetooth
NOTHING COMES REMOTELY CLOSE.
The same i-Pilot that lets you lock onto a fishing spot, record and retrace paths, and command speed and steering just got better. Redesigned with a larger LCD screen, more options, and better controls, we've dialed in the technology that lets you dial in your boat position.
Redesigned Remote
We gave it a 33% larger LCD screen that's fully viewable in sunlight, expanded menu navigation, and more intuitive controls - making the i-Pilot remote better than ever.
Bluetooth Communication
The new i-Pilot system connects via Bluetooth, allowing for easy software updates to add new features to your system via your smartphone.
i-Pilot Phone App
Bluetooth communication allows new i-Pilot to pair with your smartphone, allowing for easy software updates and quick command of speed, steering, Spot-Lock, high speed bypass, and Advanced AutoPilot.
Heading Sensor
Select i-Pilot systems feature a new Heading Sensor, which recognizes changes in the boat's heading due to wind andcurrent, and communicates with the i-Pilot system to minimize boat swing for a more accurate, stronger hold.
Reinvented Spot-Lock
Enhanced with new hardware and software algorithms, Spot-Lock works holds you tighter to your fishing spot than ever before, making it the most accurate electronic GPS anchor ever.
Spot-Lock Jog
Move your Spot-Lock five feet forward, backward, left or right - just by pushing a button.
Additional Features:
iTrack Record/Playback: Store and retrace up to six 2-mile trolling paths to return to later
Advanced AutoPilot: Stay on a heading automatically
Cruise Control: Precisely dial in and adjust speed in 0.1 mile-per-hour increments
CoPilot: Control and monitor speed, steering, prop on/off and high speed bypass
*The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Johnson Outdoors, Inc. is under license. Other trademarks and trade names are those of their respective owners.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
160.34 |
|
|
V-CAN Wireless Remote Controller for V-CAN Thrusters & BOW PRO
This system gives boaters full control of their electrically driven equipment on board. It includes a base unit, one remote control, and two connection cables. The VETUS wireless control handheld remote has a range of 10 to 25 m, depending on the location of the receiver, and delivers easy control of V-CAN Thrusters and BOW PRO models. The wireless remote control meets the EMC requirements.
Features:
For V-CAN Thrusters and BOW PRO models
Connectors for two thrusters (4 channels)
Open-air range is up to 10m
Maximum range is up to 25m when unimpeded
Specifications:
Remote Control
Power supply 3 VDC CR2032 (1x)
Protection Class: IP66
Frequency: 433.92 Hz
Temperature Range: 0°C - 70°C (+32°F - 158°F)
Weight: 50 g (2 oz)
Receiver
Power Supply: 8 VDC to 30 VDC
Maximum Current (per output): 8 A (at 30 Volts DC)
Protection Class: IP40
Frequency: 433.92 Hz
Temperature Range: 0°C - 70°C (+32°F - 158°F)
Weight: 800 g (28 oz)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
632.47 |
|
|
MCU006 Vertical Remote Control
Total Control with ease and comfort.
Furuno's MCU006 Series of Remote Controller for NavNet TZtouch3, TZtouchXL, and TZT2BB Multi-Function Displays feature a comfortable rotary knob and beveled keys for enhanced ease of use. The large knob can be utilized as the RotoKey and for zooming in/out on both TZtouch3 and TZtouchXL. The remote also has 10 dedicated buttons that operate different functions.
A single MCU006 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU006 Remote Control is a perfect companion for any helm or bridge. Whether you want to mount the controller in the arm of the captain's chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU006 is an ideal solution.
|
485.39 |
|
|
Battery Status and Freedom Inverter/Charger Remote Control
Provides Valuable Inverter/Charger System Monitoring and Control
The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel.
Note: Not for Freedom HF or Freedom SW Series.
Product Features
Independent invert and charge on/off controls
Push button control of power sharing, equalizing, battery set-up
Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage
LED warning indictors for low battery and overload warning
Splash resistant design
Incoming AC breaker selection allows programmable power sharing
Easy to install
25' Cable
One year warranty
Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
147.92 |
|
|
MS-RGBRC RGB Lighting Control Module with Wireless Remote Control
Enhance your on-board audio entertainment experience with not only brilliant audio, but LED illumination options to match! The MS-RGBRC wireless remote lets you take control of your on-water experience to adjust the lighting of your Fusion RGB speakers.
This portable wireless remote will function up to 10m from the speaker lighting control module, giving you the freedom to adjust the illumination from anywhere on your boat. Both static and dynamic color options are available, with the color easily selectable on the intuitive color select wheel.
Wireless Control of Your LED Illumination
Enjoy full control of the illumination of your Fusion RGB speakers with the MS-RGBRC wireless remote control. The remote is portable and will function up to 10m from the speaker lighting control module.
Static and Dynamic Color Options
A range of colors are available in both static and dynamic modes with the RGB speakers to complement your music and enhance your on-board audio entertainment experience. Simply select any color on the remote’s color wheel or change modes to cycle automatically through predefined lighting patterns.
Intuitive Touch Controls
Adjusting the lighting of your Fusion RGB speakers is made easy with touch controls including an intuitive color-select wheel.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
36.38 |
|