Tethered 1/4" Spring Loaded Clevis Pin w/Lanyard For use with Attwood deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins. This handy 1/4" spring-load clevis pin with lanyard allows the pin to be tethered to prevent loss of the pin when it is removed from the bimini top deck or rail hinge fitting.

TR8 Spring Loaded Safety Pin - 3/4" Shackle Features: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard-style release for maximum user safety All parts 100% stainless steel WARNING: This product can expose you to chemicals including Titanium dioxide which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

TR3 Spring Loaded Safety Pin - 1/4" Shackle Features: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard-style release for maximum user safety All parts 100% stainless steel WARNING: This product can expose you to chemicals including Titanium dioxide which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

March 893-10-1/4" 24V Pump W/ 1286-0002-0100

BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are Inches NPT Inlet, Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS T310GA5-1 1/4, CENTRIFUGAL PUMP 3PH 1HP TEFC Close Coupled, 60 Hz, Three Phase, 3500 RPM, 1 Horsepower, TEFC Motor Enclosure, Frame Size 56J.   UNSPSC Code: 40150000

Roper Pump 2AM08 1 1/4 Gear Pump Ft Mt W/Rv Roper A Series Gear Pump model 2AM08   Cast Iron Housing Ductile Iron Gears Bronze Bushings Mechanical Seal With Relief Valve 1 1/4″ NPT Ports

Stainless Steel Welded Pad Eye - 2-1/4"L x 5/8"W Specifications: Eye Width 1/2" (13 mm) Eye Height 1/2" (13 mm) Eye Stock 1/4" (6 mm) Length 2-1/4" (57 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-11/16" (42 mm) SWL 750 lbs. (350 kg) Weight 1.75 oz. (50 g)

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female   Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports

BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.

BURKS 315G5-1 1/4, Centrifugal Pump 3PH 1 1/2HP 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.75 Inches.

BURKS 315GA5-1 1/4, Centrifugal Pump 230/460v 3PH 1 1/2HP BF All BRONZE Construction. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.56 Inches.

BURKS 320G6-1 1/4, CENTRIFUGAL PUMP 230/460v 3PH 2HP Bronze Fitted Cast Iron Construction.   Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.13 Inches

BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.   Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.   Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.  Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.    Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.   Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us