|
Ibiza LED Engine Room Light - Non-Dimming White - Black Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55 F
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
129.49 |
|
|
Ibiza LED Engine Room Light - Non-Dimming White - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C :-31/35 to + 131/55 F
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
127.42 |
|
|
Ibiza LED Engine Room Light - Red/White Dimming - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C :-31/35 to + 131/55 F
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
157.06 |
|
|
Ibiza LED Engine Room Light - Blue/White Dimming - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output options, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55 F
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
157.06 |
|
|
NevisLT LED Engine Room Light - 1000 Lumens
A high output LED alternative to large, boxy, unreliable fluorescents. With more than 1,000 integrating sphere tested lumens, the NevisLT douses hard to light areas with a 180 degree spread of bright even light. Ignition protected and perfect for many applications like mechanical spaces or compartments. Developed, designed, and manufactured in Florida, USA, the NevisLT delivers exceptional reliability and class-leading performance.
As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability.
Specifications:
Voltage: 10-30V DC
12V DC Amps: 1.3A
2V DC Amps: 600mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 12
Lumens (White): 1000
Width: 5"
Height: 2.5"
Depth: .63"
IP67 Compliant
Certified Ignition Protected
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
120.66 |
|
|
E360 Engine Room Light - 12V - Cool White
The E-3600 is a surface-mounted engine room light. The impact-resistant PC lens allows the wires to exit straight back through the mounting surface or be routed to the side through the end cap. Featuring a total of 36 LEDs, this fixture produces 1,154 lumens, comparable to a 160-watt standard bulb. Drawing a mere 1.1 Amps at 12V, this fixture is often used in multiple quantities to eliminate any dark spots in the engine room.
Features:
12 Volt, 13.2 Watt
Surface Mount (hardware included)
Specifications:
LED Quantity: 36 (4 rows of 9 LEDs)
Lumens: 1,154
Protection: IP65
LED Type: SMD5630 cool white (5,500K-6,300K)
Beam Angle: 180°
*The "P" within the part number indicates retail packaging
|
54.67 |
|
|
Caprera3 Spreader Light - White Non-Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
80.06 |
|
|
Capri3 Spreader Light - White Non-Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
80.14 |
|
|
Caprera2 - LED Flood Light - Black Finish - 2-Color White/Blue Dimming
What do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Caprera2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 1.3mA
24V DC Amps: 600mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Lumens (White): 16
Rated Watts: 290
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 4.49" (11.41cm)
Height: 1.65" (4.20cm)
Depth: 2.83" (7.20cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
147.43 |
|
|
Orbit - Flush Mount Down Light - Brushed Finish - White Non-Dimming
Class-leading output, weatherproof construction, and the simplest installation in the industry - Lumitec's Orbit Flush Mount Down Lights stand apart from the crowd. With a shallow-depth profile (less than 1/2" mounting depth) and a secure composite mounting system the lights are ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. Fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules, specialized switches, or additional wire runs.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 315mA
24V DC Amps: 175mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 136
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 1.99" (5.05cm)
Height: 1.99" (5.05cm)
Depth: 0.72" (1.82cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
49.68 |
|
|
Orbit - Flush Mount Down Light - White Finish - White Non-Dimming
Class-leading output, weatherproof construction, and the simplest installation in the industry - Lumitec's Orbit Flush Mount Down Lights stand apart from the crowd. With a shallow-depth profile (less than 1/2" mounting depth) and a secure composite mounting system the lights are ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. Fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules, specialized switches, or additional wire runs.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 315mA
24V DC Amps: 175mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 136
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 1.99" (5.05cm)
Height: 1.99" (5.05cm)
Depth: 0.72" (1.82cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
49.68 |
|
|
Halo - Flush Mount Down Light - White Finish - White Non-Dimming
Class-leading output, weatherproof construction, and the simplest installation in the industry - Lumitec's Halo Flush Mount Down Lights stand apart from the crowd. With a shallow-depth profile (less than 1/2" mounting depth) and a secure composite mounting system the lights are ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. Fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules, specialized switches, or additional wire runs. Choose white or brushed.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 315mA
24V DC Amps: 175mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White): 136
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 1.99" (5.05cm)
Height: 1.99" (5.05cm)
Depth: 0.70" (1.77cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.71 |
|
|
Mirage - Flush Mount Down Light - Glass Finish/White Bezel - 3-Color Red/Blue Non-Dimming with White Dimming
Lumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 490mA
24V DC Amps: 250mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 6
Lumens (White): 372
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 3.25" (8.25cm)
Height: 3.25" (8.25cm)
Depth: 1.11" (2.81cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
87.74 |
|
|
Aurora - LED Dome Light - Polished Stainless Steel Finish - White Dimming
Customers told us they wanted a high quality LED replacement for the ubiquitous dome light. It had to be bright, with wide even light. They wanted a clean look, an intuitive and reliable switch, and a notable level of quality. We delivered, and then added IP67 immersion protection. We then raised the bar with multiple color output options and dimming. Lumitec's Aurora Dome Light stands apart.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 290mA
24V DC Amps: 160mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 4
Lumens (White):180
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 4.00 (10.16cm)
Height: 4.00" (10.16cm)
Depth: 0.73" (1.84cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
97.98 |
|
|
Mirage - Flush Mount Down Light - Glass Finish/White Bezel - 4-Color White/Red/Blue/Purple Non-Dimming
Lumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 490mA
24V DC Amps: 250mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 6
Lumens (White): 372
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 3.25" (8.25cm)
Height: 3.25" (8.25cm)
Depth: 1.11" (2.81cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
87.74 |
|