Propane & Gasoline Sensor with Cable - Aluminum Housing  Gasoline & propane sensor with 12" lead and 20' sensor cable. Compatible With: G-1 Gasoline Fume Detector G-2 Gasoline Fume Detector P-1 Propane Fume Detector P-2 Propane Fume Detector  *Sold as an Individual 

Propane & Gasoline Sensor with Cable - Red Plastic Housing Gasoline & propane sensor with 12" lead and 20' sensor cable. Compatible With: G-1 Gasoline Fume Detector G-2 Gasoline Fume Detector P-1 Propane Fume Detector P-2 Propane Fume Detector  *Sold as an Individual 

Propane Fume Detector w/Plastic Sensor & Solenoid Valve - Black Bezel Display Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions. Features/Specifications: 2-3/16" Round Black Display with LEDs & Silence/Test Button Solenoid Valve & Adapter Solenoid Valve Control Button Automatically Closes Solenoid Valve 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:725mA

Propane Fume Detector w/Plastic Sensor - No Solenoid Valve - Black Bezel Display Detect Propane leaks early to prevent personal injury and possible explosions. Features/Specifications: 2-3/16" Round Black Display with LEDs & Silence/Test Button 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

Propane Fume Detector w/Plastic Sensor - No Solenoid Valve - Chrome Bezel Display Detect Propane leaks early to prevent personal injury and possible explosions. Features/Specifications: 2-3/16" Round Chrome Display with LEDs & Silence/Test Button 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

Propane Fume Detector w/Automatic Shut-Off & Plastic Sensor - No Solenoid Valve - Black Bezel Display Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions. Features/Specifications: 2-3/16" Round Black Display with LEDs & Silence/Test Button 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

Propane Fume Detector w/Automatic Shut-Off & Plastic Sensor - No Solenoid Valve - Chrome Bezel Display Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions. Features/Specifications: 2-3/16" Round Chrome Display with LEDs & Silence/Test Button 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

Propane Fume Detector w/2 Plastic Sensors - No Solenoid Valve - Square Black Bezel Display Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions. Features/Specifications: 2-5/8" Square Black Display with LEDs & Silence/Test Button 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:780mA For use with existing solenoid valve & adapter

Propane Fume Detector, 2 Channel, 2 Sensors, Solenoid Valve & Control & 20' Cable - 24V DC  Propane has become the fuel of choice for cooking and heating. Highly BTU-efficient and readily available, propane is becoming more and more a part of power boating, sailing, and camping. The Xintex® line of propane products includes everything you need for outfitting a complete and safe propane system. Propane is heavier than air and can settle below deck and in the bilge where it can be detonated by an engine start-up or electrical spark of any kind. Xintex® Propane Fume Detectors will alarm when fumes reach 18-20% LEL.  *Includes Time Sensor Valve

Propane Fume Detector with Plastic Sensor & Solenoid Valve - Chrome Bezel Display Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions. Features: 2-3/16" Round Chrome Display with LEDs & Silence/Test Button Solenoid Valve & Adapter Solenoid Valve Control Button Automatically Closes Solenoid Valve 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal: 55mA/Maximum: 725mA

Fixed Heat Detector with Base The Fireboy-Xintex Heat Detector uses a single thermistor to sense the air temperature around the detector. This heat detector was designed to detect how fast the temperature is increasing. Features: 163°F Fixed Heat Detector Housing: White flame-retardant polycarbonate Terminals: Nickel-plated stainless steel Ideal in environments that are dirty or smoky Unaffected by wind or atmospheric pressure Remote test feature Specifications: Detection Principle: Measurement of heat using a thermistor Sampling Frequency: Once every four seconds Supply Voltage: 8.5 V dc to 33 V dc Supply Wiring: Two wire supply, polarity sensitive Power-up Time: < 20 seconds Minimum: ‘detector active’ voltage: 6 V Holding Voltage: 5 V - 33 V Minimum Holding Current: 8 mA  Minimum Voltage to Light Alarm LED: 5 V  Alarm Reset Voltage: < 1 V  Alarm Reset Time: One second  Alarm Indicator: Integral indicator with 360º visibility Operating & Storage Temperature: -40ºC to +70ºC Operation: Open-web casing that enables air to flow freely across a thermistor which measures the air temperature every two seconds  A microprocessor stores the temperatures and compares them with pre-set values to determine whether a fixed upper limit - the alarm level - has been reached Detectors the microprocessor uses algorithms to determine how fast the temperature is increasing

Gasoline & Propane Sensor Only This sensor is a replacement for Fireboy-Xintex P systems.  Installation: The sensor should be located by the propane-powered appliance, near the floor Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage Harsh chemicals should not be used to clean sensors Use the appropriate #8 mounting hardware to mount the Propane Fume Sensor in the desired location The rubber gasket should be installed between the sensor and the mounting surface Connect to the extension cable using the attached quick-disconnect connectors (Sold Separately)

Propane Fume Detector & Alarm w/2 Plastic Sensors & Solenoid Valve - Square Black Bezel Display Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions. Features/Specifications: 2-5/8" Square Black Display with LEDs & Silence/Test Button Solenoid Valve & Adapter Solenoid Valve Control Button Automatically Closes Solenoid Valve 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:780mA

CO Alarm 12/24V DC - Black A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual 

CO Alarm Internal Battery - Black A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual